Maytag MGC6430BDW, MGC6430BDB Dimension Guide

www.dexpress.com DIMENSION EXPRESS Fax on Demand [phone]

This Data Sheet Includes Information On

Maytag

• Product Model Number (s): •

Gas Cooktops:

MGC6430BDW and MGC6430BDB

• Dimensions (Actual Size) •

Overall width:

Overall depth:

Distance from countertop to bottom of unit:

Cut-Out width:

Cut-Out depth:

30"
21 1/2"
3 13/16"
28 1/2"
19 15/16"

Minimum spacing to nearest vertical

combustible wall to the RIGHT:

6"

Minimum spacing to nearest vertical

combustible wall to the LEFT:

6"

Minimum spacing to nearest vertical

combustible wall to the REAR:

Minimum spacing to front edge of counter:

1"
2 1/8"

Minimum distance between cooktop

and cabinet directly above:

Minimum width of cabinet directly above:

30" min
30"

Maximum depth of cabinets directly

above and adjacent:

13"

Minimum distance between countertop

and adjacent cabinet above:

18"

• Additional Information •

• Designed to fit in a standard 30" wide cabinet and 25"

deep countertop.1/4" or 3/8" Radius on cutout corners.

• Minimum distance from top of counter to combustible

material below is 5 1/4".

• Electrical requirements: 120 volts 60 Hz protected by

a 15 amp fuse or compatible circuit breaker. Minimum
wire size is 14 gauge. Copper wire only. Unit is
supplied with a power cord having a 3-prong grounding
pug which exits from the cooktop in the middle of the
right. A grounded and polarized 3-prong receptacle
should be made available. Individual branch circuit
serving the cooktop is recommended.

• Gas requirements: Supply line should be 3/4" and

enter the cooktop in right rear corner of unit. Unit is
shipped from factory for use on natural gas. Unit is
equipped with built-in conversion for use on LP gas.

- Supplied with 1/2" NPT female inlet on regulator.

Regulator supplied with unit and a shutoff valve must
be installed in an accessible location.

- Gas pressure requirements: Natural gas- 6" WC min,

14" WC max. LP gas- 11" WC min, 14" WC max.

Side View (not to scale)

1"

2 1/8"

3 13/16"

19 15/16"

28 1/2"

6" 6"

30"

30" min

18"

30"

21 1/2"

Overall Dimensions

Top View (not to scale)

Cut-Out Dimensions

Countertop View

(not to scale)

Cabinet Requirements

Wall View

(not to scale)

Requires 18" high by
6" wide clearance to
any combustible
surface above the
cooktop on both sides.
(noted by solid area)

Subject to change without notice. This system is designed to
be updated daily if necessary. Dimension Express is not
responsible for use of superseded, voided, or outdated data
sheets. Because of the difficulty or impracticability of deter­mining actual damages, liability of Dimension Express shall
not exceed $50.00.
Copyright © Dimension Express, 2002.

• NEVER reuse Data Sheets. Data Sheets are subject to change without • Call Dimension Express if you have any questions at [phone] •
notice. Dimension Express is a FREE service bureau and is updated daily, • Always refer to a current Code at a Glance or manufacturer directory •
it makes far more sense to spend the time necessary to request new Data • Data Sheet codes change on the first of odd numbered months at 12:01am •
Sheets for each project, as opposed to the problems, time, costs, and risks
associated with reusing old Data Sheets.

252

BN • A252 • • 031004 • 135358 • 68514