Maytag MDC5100AWB, MDC5100AWW Dimension Guide

Maytag MDC5100AWB, MDC5100AWW Dimension Guide

www.dexpress.com DIMENSION EXPRESS Fax on Demand (775) 833-3600

 

 

This Data Sheet Includes Information On

 

 

 

Maytag

 

 

Product Model Number (s):

 

 

Portable Dishwashers:

 

 

 

MDC5100AWB and MDC5100AWW

 

Dimensions (Actual Size)

 

 

Height:

36 1/2"

 

 

 

Width:

24 1/4"

 

 

 

Depth including door:

28"

 

 

 

Door swing:

23 1/2"

 

 

Additional Information

Electrical requirements: 120 volts AC, 60Hz., 15 or 20 amp, fused electrical supply is required. Time delay fuse or circuit breaker is recommended. It is recommended that a separate circuit serving only this appliance be provided.

Water requirements: The hot water faucet or hot and cold single-spout water faucet should be accessible within 30" of the back of the dishwasher and should provide 15-120 psi water pressure. The hot water heater should be set to deliver 120°F water temperature to the dishwasher for best results.

Drain requirements: To drain the unit, you need a sink or a laundry tub having a minimum carryaway capacity of 7 gallons per minute. The top of the sink or laundry tub cannot be lower than 27" or higher than 48" from the bottom of the dishwasher.

Side View

28"

(not to scale)

 

36 1/2"

23 1/2"

24 1/4"

Front View (not to scale)

36 1/2"

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Subject to change without notice. This system is designed to

 

 

 

 

 

 

 

 

 

be updated daily if necessary. Dimension Express is not

 

 

 

 

 

 

 

 

 

responsible for use of superseded, voided, or outdated data

 

 

 

 

 

 

 

 

 

sheets. Because of the difficulty or impracticability of deter-

 

 

 

 

 

 

 

 

 

mining actual damages, liability of Dimension Express shall

 

 

 

 

 

 

 

 

 

not exceed $50.00.

 

 

 

 

 

 

 

 

 

Copyright © Dimension Express, 2002.

362

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• NEVER reuse Data Sheets. Data Sheets are subject to change without

• Call Dimension Express if you have any questions at (775) 833-3633 •

notice. Dimension Express is a FREE service bureau and is updated daily,

• Always refer to a current Code at a Glance or manufacturer directory •

it makes far more sense to spend the time necessary to request new Data

• Data Sheet codes change on the first of odd numbered months at 12:01am •

Sheets for each project, as opposed to the problems, time, costs, and risks

 

 

 

 

BN177 • A362 • • 032603 • 95657 • 46137

associated with reusing old Data Sheets.

 

 

 

 

 

 

 

Loading...