Maytag MDB7749AWB1, MDB7709AWW2, MDB7709AWB2, MDB7609AWW3, MDB7809AWW2 Owner’s Manual

...
THANK YOU for purchasing this high-quality product. If you should experience a problem not covered inTROUBLESHOOTING,
please visit our website at www.maytag.com for additional information. If you still need assistance, call us at 1-800-688-9900. InCanada, visit our website at www.maytag.ca or call us at 1-800-807-6777.
You will need your model and serial number located near the door on the right-hand or left-hand side of the dishwasher interior.
Para obtener acceso a "lnstrucciones para el usuario de la lavavajillas" en espafiol, o para informaci6n adicional de su producto
visite :www.maytag.com Tenga listo su nOmerode modelo completo. Puede encontrar su nOmero de modelo y de serie en la etiqueta ubicada cerca de la
puerta al lado derecho o izquierdo del interior de la lavavajillas.
DISHWASHER SAFETY ............................................................. 1
QUICK STEPS ............................................................................ 3
DISHWASHER USE .................................................................... 3
CYCLE AND OPTION DESCRIPTIONS .................................... 5
DISHWASHER FEATURES ........................................................ 7
DISHWASHER CARE ................................................................. 8
TROUBLESHOOTING ................................................................ 9
WARRANTY .............................................................................. 11
Your safety and the safety of others are very important.
We have provided many important safety messages inthis manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
You can be killed or seriously injured if you don't immediately follow instructions.
You can be killed or seriously injured if you don't follow
instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.
W10255114A
iMPORTANT SAFETY iNSTRUCTiONS
WARNING: When using the dishwasher, follow basic precautions, including the following:
[] Read all instructions before using the dishwasher. [] Do not tamper with controls. [] Use the dishwasher only for its intended function. [] Use only detergents or rinse agents recommended for use in a
dishwasher, and keep them out of the reach of children.
[] When loading items to be washed:
1) Locate sharp items so that they are not likely to damage the door seal; and
2) Load sharp knives with the handles up to reduce the risk of cut- type injuries.
[] Do not wash plastic items unless they are marked "dishwasher
safe" or the equivalent. For plastic items not so marked, check the manufacturer's recommendations.
[] Do not touch the heating element during or immediately after use. [] To avoid electrical shock hazard, the sides and back must be
enclosed and the front panels must be attached before electrical
power is applied to the dishwasher. Refer to the installation instructions for proper grounding procedures.
[] Do not abuse, sit on, or stand on the door, lid, or dish
racks of the dishwasher.
[] To reduce the risk of injury, do not allow children to
play in or on the dishwasher.
[] Under certain conditions, hydrogen gas may be
produced in a hot water system that has not been used for two weeks or more. HYDROGEN GAS IS
EXPLOSIVE. If the hot water system has not been used for such a period, before using the dishwasher
turn on all hot water faucets and let the water flow from each for several minutes. This will release any
accumulated hydrogen gas. As the gas is flammable, do not smoke or use an open flame during this time.
[] Remove the door or lid to the washing compartment
when removing an old dishwasher from service or discarding it.
SAVE THESE iNSTRUCTiONS
GROUNDING iNSTRUCTiONS
[] For a grounded, cord-connected dishwasher:
The dishwasher must be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. The dishwasher is equipped with a cord having an equipment-grounding conductor and a grounding
plug. The plug must be plugged into an appropriate outlet
that is installed and grounded in accordance with all local codes and ordinances.
WARNING: Improper connection of the equipment-
grounding conductor can result in a risk of electric shock.
SAVE THESE iNSTRUCTiONS
Do not use dishwasher until completely installed. Do not push down on open door. Doing so can result in serious injury or cuts.
Check with a qualified electrician or service representative
if you are in doubt whether the dishwasher is properly grounded. Do not modify the plug provided with the dishwasher; if it will not fit the outlet, have a proper outlet
installed by a qualified electrician.
[]
For a permanently connected dishwasher: The dishwasher must be connected to a grounded metal,
permanent wiring system, or an equipment-grounding conductor must be run with the circuit conductors and
connected to the equipment-grounding terminal or lead on the dishwasher.
Tip Over Hazard
Prepare and load _
dishwasher. _Y
for cleaning and
rinse aid for J
--Oeter.ent
drying.
I":,1 I,_-=.........I, ._., L _'d,,o?
) I:t,_I I IAi'i'II_:_IIt;' [ "
Prepare and Load the Dishwasher
IMPORTANT: Remove leftover food, bones, toothpicks and other
hard items from the dishes. Remove labels from containers before washing.
Rack loading
When loading silverware, always place sharp
Select a cycle and option.
cycles
|||||
options
|||||
@ locked 2 /_
hold to lock
Start dishwasher.
®start
resume
Avoid overlapping items like bowls or plates that may trap food.
Place plastics, small plates and glasses in the upper rack. Wash only plastic items marked "dishwasher safe."
To avoid thumping/clattering noises during operation: Load dishes so they do not touch one another. Make sure lightweight
load items are secured in the racks.
I
14,,!i%_ _i
I "Ii_ ,i1
%II "
........... J_'k;'
Upper rack
Make sure nothing keeps spray arm(s) from spinning freely. It is important for the water spray to reach all soiled surfaces.
Make sure that when the dishwasher door is closed no items are blocking the detergent dispenser.
Items should be loaded with soiled surfaces facing down and inward to the spray as shown. This will improve cleaning and drying results.
Lower rack
items pointing down. ___7,_
STEP2
Add Detergent
NOTE: If you do not plan A to run a wash cycle soon,
run a rinse cycle. Do not
use detergent. B ........................................C
Use automatic dishwasher detergent
only. Add powder, liquid or tablet detergent just before
starting a cycle. A.Cover latch
Fresh automatic B. Main Wash section dishwasher detergent C.Pre-Washsection
results in better cleaning. Store tightly closed detergent container in a cool, dry
place.
Theamountofdetergenttousedependson: Howmuchsoilremainsontheitems- Heavilysoiledloads
requiremoredetergent.
Thehardnessofthewater- Ifyouusetoolittleinhardwater,
disheswon'tbeclean.Ifyouusetoomuchinsoftwater, glasswarewilletch.
SofttoMediumWater(0-6grainsperU.S.gallon) [typicalwatersoftenerwaterandsomecitywater]
MediumtoHardWater(7-12grainsperU.S.gallon) [wellwaterandsomecitywater]
Dependingonyourwaterhardness,filltheMainWashsection ofthedispenserasshown.FillthePre-Washsectiontothe levelshown,ifneeded.
NOTE:Fillamountsshown
areforstandardpowdered
HardWater 1[
detergent.Follow
instructionsonthepackage
whenusingotherdishwasher
MainWash Pra-Wash
detergent.
Add Rinse Aid
Your dishwasher is designed to use rinse aid for good drying performance. Without rinse aid your dishes and i'_ Full dishwasher interior will have excessive moisture. The heat
dry option will not perform as well without rinse aid.
Rinse aid keeps water from forming droplets that can dry as spots or streaks. It also improves drying by kYJAdc allowing water to drain off of the dishes after the final
rinse. Rinse aid helps to reduce excess moisture on the dish racks
and interior of your dishwasher. Check the rinse aid indicator. Add rinse aid when indicator
drops to "Refill" level.
To add rinse aid, turn the dispenser
cap counterclockwise and lift off. Pour rinse aid into the opening until
the indicator window looks full.
Replace the dispenser cap and turn clockwise. Make sure cap is fully
locked.
USERINSEAIDFOR BETTERDRYING Full
Lock !
Open c:::__
STEP3
Select a Cycle (cycles vary by model)
See "Cycle and Option Descriptions" charts in the following section.
Heavier cycles and options affect cycle length. Some cycles and options will take up to 31/2hours to complete.
cycles
Select Options (options vary by model)
See "Cycle and Option Descriptions" charts in the following section.
You can customize your cycles by pressing the options desired.
options
¢_ locked 2 4 (_
hold to lock
STEP4
Start or Resume a Cycle
Run hot water at the sink nearest your dishwasher until the water is hot. Turn off water.
Push door firmly closed. The door latches automatically. Select the wash cycle and options desired OR press START/RESUME to repeat the same ®start
cycle and options as in the previous wash cycle. ,e....
You can add an item anytime before the main wash starts. Open the door slowly and add the item. Close the door firmly. Lights will stop flashing when the door is properly shut. Press the START/RESUME button and after a slight delay, the cycle will resume at the point of interruption.
NOTE: For most water conditions, the factory setting of 2 will give good results. If you have hard water or
notice rings or spots, try a higher setting. Turn the arrow adjuster
inside the dispenser by either using your fingers or inserting a flat-blade
screwdriver into the center of the arrow and turning.
turn to lock
cycles
quiet series 400 load sensing technology
options
Clocked 2 4 _:_ ®start ®cancel
holdtolock resume drain
\4
SteamClean
clean@
sanitized
SILVERWARE
BL:.,i,.:ST
cycles
wash dry dean
options
®@
quiet series 300 * load sensing technology
locked _ sanitized 2 4 (
hold to lock
This information covers several different models. Your dishwasher may not have all the cycles and options described.
CYCLES DISH LOAD TYPES DESCRIPTIONS
WASH TIME (HH:MM)
Cycle Cycle +
Minimum Options
Use for any loads with Designed to select the nUmber of Watei fil!s 0:55 1:2! 3:39
heavy, normal or light best suited for the soil level of each load. amounts of food soil. During the wash; the wash action will
repeatedly pause for several seconds,
Use for hard-to-clean,
heavily soiled pots, pans, casseroles, and regular
This cycle forces maximum time, water and
heat. During the wash, the wash action will repeatedly pause for several seconds.
1:09 1:35 3:50
tableware.
use for loads With normal The energY:usage label is based on this 1:04 ii30 3:46
L____J amounts of food so . cyce. Durng thewash, the wash act on W
repeated!y pause for severa! seconds,
@start @cancel
Minimum
resume drain
*Maximum
Use for lightly soiled items During the wash, the wash action will 0:47 1:13 2:56
or china and crystal, repeatedly pause for several seconds.
use to quickly Wash This cYcie does not drY 0:30 0i30 0:30
prerinsed glasses or dish
loads.
Use for rinsing dishes,
glasses, and silverware that will not be washed
right away.
This cycle does not dry.
Do not use detergent. During the wash, the wash action will repeatedly pause for several seconds.
0:10 0:10 0:10
You can customize your cycle by selecting an option. See option selections. If you change your mind, press the option again to turn off the option, or select a different option. You can change an option anytime before the selected option begins.
*Maximum wash times depend on water temperature, heavy soil condition, dish load size and options selected.
OPTIONS DISH LOAD TYPES DESCRIPTIONS USE WITH:
Heat dry Heat dry: Eor best d_ing Turn OFF when loads contain plastic dinnerware that maY be HeaW Wash, Normal
results, dry dishes with sensitive to high temperatures. Wash, Light, Insta
hold to lock _-_ I U S
heat . This option With the useof rinse aid Will provide the best Wash! or Aut0 C!ean Extra dry: Use for loads drying performancel needing extra drying.
OPTIONS DISH LOAD TYPES DESCRIPTIONS USE WITH:
Tosanitize your dishes and Raises the water temperature in the final rinse to Heavy Wash, Normal
glassware in accordance approximately 154°F (68°C). This high temperature rinse Wash, Light, Insta with NSF/ANSI Standard sanitizes your dishes and glassware in accordance with Wash, or Auto Clean
184 for Residential NSF/ANSI Standard 184 for Residential Dishwashers. Plus Dishwashers. Certified residential dishwashers are not intended for
licensed food establishments.
The Sanitize option adds heat and time to the cycle.
use for loads With normal Provides deep clean and Shine bYadding steam to the cYcle: Heaw, Noimai, &Auto
amounts of food soils; Raises the water temperature in the f nal rinse to Clean Plus cycles spec!anzea opuon Tot approximately 154OF(68oc).
siemware ana g ass
cleaning,
Loads containing tough, Increases the target water temperature during the wash Heavy, Normal, & Auto
baked-on food. portions of the cycle. Clean Plus cycles
Adds heat, wash time and water to the cycle.
Torun .y.0Uidishwasher at Delays the start era CYc!e Up tO 6 hour s A!! CYc!es a ater t me or dur ng off
, ; -Select awash cycle and optionsl Press Delay. Press START/
;, _, peaK n0urs: RESUME. Close the door firmly '
Control Lock
@ locked
hold to lock
Toavoid unintended use of your dishwasher, or cycle
and option changes during a cycle.
To turn on Lock, press and hold Heated Dry for at least
3 seconds.
To turn off Lock, press and hold Heated Dry for at least
3 seconds.
Anytime
When Control Lock is lit, all buttons are disabled. Ifyou press any pad while your dishwasher is locked, the light flashes
5 times. The dishwasher door can be opened while the controls are locked.
IMPORTANT: The sensor in your dishwasher monitors the soil level. Cycle time and/or water usage can vary as the sensor adjusts the cycle for the best wash performance. If the incoming water is less than the recommended temperature or food soils are heavy, the cycle will automatically compensate by adding time, heat and water as needed.
CONTROL PURPOSE COMMENTS
To start or resume a !f the door is opened during a cycle orthe power is interrupted, al! lights wi!l flash to indicate awash cycle suspended cyc!el The cycle will not resume until the door is closed and the START/RESUME
@start ..................................... button is pushed ..............................................................................................................................
resume
To cancelwash cycle
drain
Close the door firmly. The dishwasher starts a 2-minute drain (if needed). Let the dishwasher drain completely.
clean_ TOfollow the The !,Clean" indicator glows Whena cycle is finished.
,_nt,ze__ progress and status
! ', .: . . ifY0u Select the sanitize option; When the Sanitize cYc!e is finished, the sanitized indicator glowsl
wash dr dean O1" your alsnwasner
y . If your dishwasher did not properly sanitize your dishes, the light will not come oni This can
cyc e
happen if the cycle is interrupted, or the water could not be heated to the required temperature,
The c!ean and sanitize !ights go 0ff when the door has been opened for more than 30 seconds 0r the CANCEL key is pressed,
The ""Washing indicator glows at the start of the first fi!l Of any cYc!e (exPect Rinse On!y)and
remains on unti! the end of the main wash cyc!e.
The "Drying"indicator glows during the drying portion of each cycle (expect Insta Wash and
.................. Rinse Only).
Your Maytag dishwasher may have some or all of these features.
Split & Fit TMUtensil Basket The silverware basket can be
separated and placed in various
locations in the lower rack. Load flatware and utensils into both
sections or just one, depending on your load.
To split the basket:
Hold the basket firmly along the sides.
Unlock the baskets.
Silverware basket lids:
Use silverware basket lids to provide optimal spacing and best cleaning
performance.
Cup Clips
The Cup Clips located in the center of the upper rack can be used to hold lightweight plastic items,
cooking utensils and knives in place. Clip the item
between the tine and the clip.
Cup Shelf
Fold down the extra shelf on the left-hand or right-hand side of the top rack to hold
additional cups, stemware, or long items such as utensils and spatulas.
Adjustable Upper Racks
The Adjustable Upper Rack and can be raised or lowered to accommodate taller plates, platters, pots or pans, in the upper or
lower racks. Full size dinner plates can be loaded in the upper rack if it is in the lower position.
NOTE: Always unload racks before adjusting. To raise the rack, press
both rack adjusters and lift the rack until it is in the Up
position and level. To lower the rack, press
both rack adjusters and slide the rack back to its
lower position.
Folding Tines
The Folding Tines located in the front right corner (upper rack) provide
convenient loading space for large,
bulky items such as pots, pans and mixing bowls.
To lower the tines: Gently push the tines out of each holder
toward the center rack and lay the tines down.
Stack-Rack
Fold down the extra shelf on the right-hand side of the upper rack to hold additional
cups, stemware or long items such as utensils and spatulas.
SilverWare Blast
The SilverWare Blast is designed to focus
cleaning power on your silverware.
Removable Upper Rack
The removable rack allows you to wash larger items such as stock
pots, roasters, and cookie sheets in the lower level rack.
IMPORTANT: Remove dishes prior to removing the upper rack from the dishwasher.
To remove the rack (push tab rack stop):
1. Roll the rack 1/3to 1/2of the way out. j
2. Remove each plastic push tab rack stop from the end of each track by pushing inward toward the rack on the ridged area of the rack stop. The rack stop will snap open and can be easily removed by pulling straight out. Be sure to support the
track while removing rack stops. _
3. Roll the rack all the way out of the track and remove from the dishwasher.
To replace the rack: Reverse the above steps 1-3 to replace the rack into the
dishwasher.
Cleaning the Dishwasher Clean the exterior of the dishwasher with a soft, damp cloth and mild detergent. If your dishwasher has a stainless steel exterior, a
stainless steel cleaner is recommended - Stainless Steel Cleaner and Polish Part Number 31464.
Clean the interior of the dishwasher, with a paste of powdered dishwasher detergent and water or use liquid dishwasher detergent
on a damp sponge to clean the cooled-down interior. A white vinegar rinse may remove white spots and film. Vinegar is
an acid, and using it too often could damage your dishwasher.
Put 2 cups (500 mL) white vinegar in a glass or dishwasher-safe measuring cup on the bottom rack. Run the dishwasher through a
complete washing cycle using an air-dry or an energy-saving dry option. Do not use detergent. Vinegar will mix with the wash water.
Ifyou have a drain air gap, check and clean it if the
dishwasher isn't draining well.
Storing the Dishwasher If you will not be using the dishwasher during the summer months, turn off the water and power supply to the dishwasher. In the
winter, if the dishwasher could be exposed to near freezing temperatures or is left in a seasonal dwelling such as a second
home or vacation home, avoid water damage by having your dishwasher winterized by authorized service personnel.
Loading...
+ 16 hidden pages