Maytag MDB4949SDH User Manual [nl]

THANK YOU for purchasing this high-quality product. Register your new dishwasher at www.maytag.com. In Canada, visit our

DISHWASHER

USER INSTRUCTIONS

You can be killed or seriously injured if you don't immediately

You

can be killed or seriously injured if you don't

follow

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.

This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

follow instructions.

instructions.

DANGER

WARNING

website at www.maytag.ca.
For future reference please make a note of your product model and serial numbers. These can be located near the door on the right-

hand or left-hand side of the dishwasher interior.

Model Number_________________________________________ Serial Number___________________________________________

Table of Contents

DISHWASHER SAFETY ............................................................. 1

QUICK STEPS ............................................................................ 3

DISHWASHER USE.................................................................... 3

CYCLE AND OPTION DESCRIPTIONS.................................... 6

DISHWASHER FEEDBACK SECTION...................................... 7

DISHWASHER FEATURES........................................................ 8

DISHWASHER CARE................................................................. 9

TROUBLESHOOTING................................................................ 9

WARRANTY .............................................................................. 12

Dishwasher Safety

W10599489B

IMPORTANT SAFETY INSTRUCTIONS

WARNING:

When using the dishwasher, follow basic precautions, including the following:

SAVE THESE INSTRUCTIONS

■ Read all instructions before using the dishwasher.

■ Use the dishwasher only for its intended function.

■ Use only detergents or rinse agents recommended for use in

a dishwasher, and keep them out of the reach of children.

■ When loading items to be washed:

1) Locate sharp items so that they are not likely to damage
the door seal; and

2) Load sharp knives with the handles up to reduce the risk
of cut-type injuries.

■ Do not wash plastic items unless they are marked

“dishwasher safe” or the equivalent. For plastic items not so
marked, check the manufacturer's recommendations.

■ Do not touch the heating element during or immediately after

use.

■ Do not operate the dishwasher unless all enclosure panels

are properly in place.

■ Do not tamper with controls.

■ Do not abuse, sit on, or stand on the door, lid, or dish racks

of the dishwasher.

■ To reduce the risk of injury, do not allow children to play in

or on the dishwasher.

■ Under certain conditions, hydrogen gas may be produced in

a hot water system that has not been used for two weeks or
more. HYDROGEN GAS IS EXPLOSIVE. If the hot water
system has not been used for such a period, before using
the dishwasher turn on all hot water faucets and let the
water flow from each for several minutes. This will release
any accumulated hydrogen gas. As the gas is flammable,
do not smoke or use an open flame during this time.

■ Remove the door or lid to the washing compartment

when removing an old dishwasher from service or
discarding it.

GROUNDING INSTRUCTIONS

SAVE THESE INSTRUCTIONS

■

For a grounded, cord-connected dishwasher:

The dishwasher must be grounded. In the event of a
malfunction or breakdown, grounding will reduce the risk of
electric shock by providing a path of least resistance for
electric current. The dishwasher is equipped with a cord
having an equipment-grounding conductor and a grounding
plug. The plug must be plugged into an appropriate outlet
that is installed and grounded in accordance with all local
codes and ordinances.

WARNING:

Improper connection of the equipment-

grounding conductor can result in a risk of electric shock.

Check with a qualified electrician or service representative
if you are in doubt whether the dishwasher is properly
grounded. Do not modify the plug provided with the
dishwasher; if it will not fit the outlet, have a proper outlet
installed by a qualified electrician.

■

For a permanently connected dishwasher:

The dishwasher must be connected to a grounded metal,
permanent wiring system, or an equipment-grounding
conductor must be run with the circuit conductors and
connected to the equipment-grounding terminal or lead on
the dishwasher.

Tip Over Hazard

Do not use dishwasher until completely installed.
Do not push down on open door.
Doing so can result in serious injury or cuts.

WARNING

State of California Proposition 65 Warnings:
WARNING: This product contains one or more chemicals known to the State of California to cause cancer.
WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other

reproductive harm.

2

Quick Steps

Prepare and load

1

dishwasher.

Add detergent

2

and rinse aid.

Select a cycle and option (cycles and options vary

3

by model).

C

AB

The full lit display will glow for Wash (A), Dry (B),
Lock (C), and Sanitized or Clean.

Start dishwasher.

4

Dishwasher Use

STEP 1

Prepare and Load the Dishwasher

IMPORTANT: Remove leftover food, bones, toothpicks and other

hard items from the dishes. Remove labels from containers before
washing.

8 Place loading pattern

Upper rack Lower rack

10 Place loading pattern

Upper rack Lower rack

12 Place loading pattern

Upper rack Lower rack

3

■ Make sure nothing keeps spray arm(s) from

A

B

C

MAIN WASH

PRE­WASH

Soft Water

Hard Water

Soft Water

Hard Water

Full

Add

USE RINSE AID FOR
BETTER DRYING

Lock

Full

Add

¹

⁄₄ turn to lock

3

2

-

-

-

max

fill

1

-

-

-

-

-

-

-

-

-

-

-

-

spinning freely. It is important for the water
spray to reach all soiled surfaces.

■ Make sure that when the dishwasher door is closed no items

are blocking the detergent dispenser.

■ Items should be loaded with soiled surfaces facing down and

inward to the spray as shown. This will improve cleaning and
drying results.

■ Avoid overlapping items like bowls or plates that may trap food.

■ Place plastics, small plates and glasses in the upper rack.

Wash only plastic items marked “dishwasher safe.”

■ To avoid thumping/clattering noises during operation: Load

dishes so they do not touch one another. Make sure lightweight
load items are secured in the racks.

■ When loading silverware, always place sharp

items pointing down. Mix other items
pointing up and some pointing down.

STEP 2

Add Detergent

NOTE: If you do not plan to run a wash cycle soon, run a rinse

cycle. Do not use detergent.

■ Use automatic dishwasher detergent only. Add powder, liquid

or tablet detergent just before starting a cycle.

■ Fresh automatic

dishwasher
detergent results
in better
cleaning. Store
tightly closed
detergent
container in a
cool, dry place.

■ For optimum

performance,
tablet detergent

A. Cover latch
B. Main wash section
C. Pre-wash section

is recommended.

Premeasured Detergents

Many detergents now come in premeasured forms (gel packs,
tablets, or powder packs). These forms are suitable for all hardness
and soil levels. Always place premeasured detergents in the main
compartment and close the lid.

Using dishwasher detergent tablets and packs have been proven
better than powder, liquid or gel detergents to reduce filming on the
dishes. By using these tablets and packs, over time this will start to
reduce or eliminate white film. Also, by using a rinse aid you can
minimize repeat buildup of white film.

Powder and Gels

■ The amount of detergent to use depends on:

How much soil remains on the items - Heavily soiled loads
require more detergent.

The hardness of the water - If you use too little in hard water,
dishes won't be clean. If you use too much in soft water,
glassware will etch.

Soft to Medium Water (0-6 grains per U.S. gallon)
[typical water softener water and some city water]

Medium to Hard Water (7-12 grains per U.S. gallon)
[well water and some city water]

■ Depending on the water hardness, fill the Main Wash section of

the dispenser as shown.

NOTE: Fill amounts shown
are for standard powdered
detergent. Follow instructions
on the package when using
other dishwasher detergent.

Main wash Pre-wash

Add Rinse Aid

■ The dishwasher is designed to use rinse aid for good drying

performance. Without rinse aid the dishes and dishwasher
interior will have excessive moisture. The heat dry option will
not perform as well without rinse aid.

■ Rinse aid keeps water from forming droplets that can

dry as spots or streaks. They also improve drying by
allowing water to drain off of the dishes after the final
rinse.

■ Rinse aid helps to reduce excess moisture on the

dish racks and interior of the dishwasher.

■ Check the rinse aid indicator. Add rinse aid when indicator

drops to “Add” level.

■ To add rinse aid, turn the

dispenser cap ¼ turn
counterclockwise and lift
off. Pour rinse aid into the
opening until the indicator
level is at “Full.” Replace
the dispenser cap and turn
to “Lock.” Make sure cap
is fully locked.

NOTE: For most water
conditions, the factory
setting of 2 will give good
results. If you have hard
water or notice rings or
spots, try a higher setting.
Turn the arrow adjuster
inside the dispenser by either
using your fingers or
inserting a flat-blade screwdriver into the center of the arrow and
turning.

4

STEP 3

AB

C

Select a Cycle (cycles vary by model)

Efficient dishwashers run longer to save water and energy, just as
driving a car slower saves gas. Cycle times may increase or
decrease depending on selections. Estimated cycle times after
calibration are listed in the “Cycle and Options Descriptions” chart
in the following section. Select the desired cycle by pressing the
CYCLES button. Each time you press the Cycles button it will
advance to the next available cycle.

Select Options (options vary by model)

See “Cycle and Option Descriptions” charts in the following
section.

You can customize the cycles by pressing the options desired and
pressing Start/Resume.

STEP 4

Start or Resume a Cycle

■ Run hot water at the sink nearest your dishwasher until the

water is hot. Turn off water.

■ Push door firmly closed. The door latches

automatically. Select the wash cycle and options
desired and press START/RESUME or press
START/RESUME to repeat the same cycle and
options as in the previous wash cycle.

■ You can add an item anytime before the main wash

starts. Open the door slowly and add the item.
Close the door firmly. Press the START/RESUME button. The
cycle resumes automatically at the point of interruption.

For fully integrated models (controls on top of console)

■ Select the wash cycle and options desired.

■ Press the START/RESUME button once and close the door.

After a brief pause, the cycle will begin. The door must be
closed within 4 seconds after pushing START/RESUME or the
lights will flash, and the dishwasher will not begin. Press the
START/RESUME button again and shut the door within
4seconds.

You can add an item anytime before the main wash starts. Open
the door slowly and add the item. Press the START/RESUME then
close the door within 4 seconds.

Follow the Progress of the Dishwasher.

Depending on the model, progress will be displayed by a full lit
display or by an indicator light on the front panel.

The full lit display will glow for Wash (A),
Dry (B), Lock (C), Sanitized, or Clean. It
will also show the estimated remaining
time for the cycle in hours and minutes.

When delay is selected, the full lit
display will show an “h” for hour and the
number of hours to delay.

The indicator light will glow blue for
wash, red for dry, or green for cycle
complete.

5

Cycle and Option Descriptions

™

This information covers several different models. Your dishwasher may not have all of the cycles and options described.

CYCLES ESTIMATED

Targets toughest food soils. Use for hard-to-clean heavily soiled pots, pans,
casseroles, and tableware.

Load and soil sensing cycle. This cycle is optimized to achieve best cleaning with
minimal water and energy for all soil levels.

This cycle with only the Heated Dry option selected, and without other options
selected, is recommended to completely wash and dry a full load of normally soiled
dishes. The energy usage label is based on this cycle and option combination.

For fast results, this cycle will clean light to medium soiled dishes, but use slightly
more water and energy. For improved drying, select heated dry option.

Use for rinsing dishes, glasses, and silverware that will not be washed right away.
Do not use detergent. During cycle, the rinse action will repeatedly pause for several

seconds.

Cycle times may increase depending on water temperature, heavy soil condition, dish load size and options selected.
*Adding options will add time to cycle. See options information.

WASH TIME
DISPLAYED

3:28 9.0 (34.0)

2:03 4.5 (16.9)

1:51 3.8 (14.5)

:59 5.5 (20.9)

:11 1.3 (4.9)

WATER
USAGE

GALLONS

(LITERS)

OPTIONS CAN BE

Runs dishwasher at a later time or during off-peak
electrical hours. Select a wash cycle and options.
Press Delay to cycle through delay time options.
Press START/RESUME. Close door firmly.

NOTE: Anytime door is opened (such as, to add a
dish), START/RESUME button must be pressed
again to resume delay countdown.

Raises main wash temperature to improve cleaning
for loads containing tough, baked-on food.

Sanitizes dishes and glassware by raising water
temperature in final rinse. In accordance with NSF/
ANSI Standard 184 for Residential Dishwashers.
Certified residential dishwashers are not intended for
licensed food establishments. This option will add
heat and time to cycle.

At end of the cycle, the sanitized indicator (or word
“sanitized” on some models) will glow. If the load did
not properly sanitize, the indicator will flash at the
end of the cycle. This can happen if cycle is
interrupted, or if the water does not reach the
required temperature. The light goes off when you
open and close the door or press CANCEL.

SELECTED

WITH

Available with

any cycle

Auto

PowerBlast™

Normal

Auto

PowerBlast™

Normal

WHAT IT DOES ADDED TIME

Delays start of a
cycle up to
24 hours

Raises main wash
temperature from
105°F (41°C) to
129°F (54°C).

Increased main
wash temperature
from 105°F (41°C)
to 145°F (63°C) and
final rinse from
140°F (60°C) to
156°F (69°C).

.

TO CYCLE

NA NA

:04 to 1:16 0-1.2

:04 to 1:15 0 - 3.0

ADDED
WATER

GALLONS

(LITERS)

(0-4.5)

(0-11.2)

6

OPTIONS CAN BE

Dries dishes with heat. Use option with rinse aid to
provide best drying results. Plastic items are less
likely to deform when loaded in top rack. Turn option
off for an air dry.

CONTROL PURPOSE COMMENTS

Press to start or resume a
wash cycle

Press to cancel wash cycle Close door firmly. The dishwasher starts a 3-minute drain (if needed). Let dishwasher

If the door is opened during a cycle or power is interrupted, Start/Resume indicator
flashes. Cycle will not resume until door is closed and Start/Resume is pressed.

NOTE: If START/RESUME button is located on top of door, push door firmly closed
within 4 seconds of pressing START/RESUME. If door is not closed within 4 seconds,
start button LED will flash, an audible tone will be heard (on some top control models),
and cycle will not start.

drain completely.

SELECTED

WITH

Auto

PowerBlast™

Normal

Quick

WHAT IT DOES ADDED TIME

Uses heating
element to speed
drying times.

TO CYCLE

:29 to :46 0

ADDED
WATER

GALLONS

(LITERS)

Control Lock avoids

unintended use of
dishwasher between cycles,
or cycle and option changes
during a cycle.

To turn on Lock, press and hold CONTROL LOCK or SANITIZE (depending on model)
for 3 seconds. Control Lock light will stay on for a short time, indicating that it is
activated and all buttons are disabled. If you press any button while the dishwasher is
locked, light flashes 3 times. Dishwasher door can still be opened/closed while
controls are locked.

To turn off Lock, press and hold CONTROL LOCK or SANITIZE (depending on model)
for 3 seconds. Light turns off.

NOTE: If the model requires you to press and hold Sanitize to lock controls, Control
Locked LED(C) will be on or off to indicate whether Control Lock is active or not.

Dishwasher Feedback Section

CONTROL PURPOSE COMMENTS

To follow the progress

C

of the dishwasher
cycle

AB

Canceling A Cycle

1. Open the door slightly to stop the cycle. Wait for the spraying

action to stop before completely opening the door.

2. Press CANCEL/DRAIN button once. The Cancel/Drain light will

light up.

3. Close the door, and the dishwasher starts a drain cycle (if

water remains in bottom of dishwasher). Let the dishwasher
drain completely. The Cancel/Drain light turns off after
3minutes.

Changing A Cycle After Dishwasher Is Started

1. You can interrupt a cycle and restart the dishwasher from the

beginning using the following procedure.

2. Open the door slightly to stop the cycle. Wait for the spraying

action to stop, then open the door completely.

3. Check that detergent dispenser cover is still closed. If cover is

open, you will need to refill the detergent dispenser before
restarting the new cycle.

4. Press CANCEL/DRAIN twice to reset the control.

Depending on the model, progress will be displayed by a full lit display or by an indicator
light on the front panel.

The full lit display will glow for Wash (A), Dry (B), Sanitized or Clean. It will also show the
estimated remaining time for the cycle.

The indicator light will glow blue for wash, red for dry, and green for cycle complete.

5. Select new cycles and options.

6. Press START/RESUME.

Adding A Dish After Dishwasher Is Started

1. Check if Add a Dish indicator is lit. (Available on some models.

Otherwise, proceed to Step 2.)

2. Open the door slightly to stop the cycle. Wait for the spraying

action to stop, then open the door completely.

3. Check whether the detergent dispenser cover is still closed. If

it is open, the wash cycle has already started and adding a
dish is not recommended.

4. If detergent has not yet been used (detergent dispenser cover

is closed), you may add a dish.

5. Press START/RESUME.

7

Dishwasher Features

Your Maytag dishwasher may have some or all of these features.

Silverware Basket

Use suggested loading patterns, as shown, to better clean the
silverware.

10 place loading pattern

Use the slots in the cover to keep the silverware separated for
optimum wash.

If the silverware does not fit into the designated slots, slide the
covers outward to remove them and mix silverware types to keep
them separated.

Load knives down, forks up, and alternate spoons for best cleaning
results.

Folding Tines

The Folding Tines located in the back
left corner (lower rack) provide
convenient loading space for large,
bulky items such as pots, pans and
mixing bowls.

To lower the tines:

Gently push the tines out of each holder
toward the center and lay the tines
down.

Cup Clips

The Cup Clips located in the upper rack can be
used to hold lightweight plastic items, cooking
utensils and knives in place. Clip the item between
the tine and the clip.

Stack-Rack Shelves

Increase loading flexibility - items
such as casserole dishes stay
stable while the folding shelf allows
you to load smaller items on top.

Cup Shelf

Fold down the extra shelf on the left-hand or
right-hand side of the top rack to hold
additional cups, stemware, or long items
such as utensils and spatulas.

Adjustable Upper Racks

The Adjustable Upper Rack can be raised or lowered to
accommodate taller plates, platters, pots or pans in the upper or
lower racks. Full size dinner plates can be loaded in the upper rack
if it is in the lower position.

NOTE: Always unload racks before adjusting.
To raise the rack, press both

rack adjusters and lift the rack
until it is in the up position
and level.

To lower the rack, press both
rack adjusters and slide the
rack back to its lower
position.

Removable Upper Rack

The removable rack allows you to wash larger items such as stock
pots, roasters and cookie sheets in the lower level rack.

IMPORTANT: Remove dishes prior to removing the upper rack
from the dishwasher.

To remove the rack (push tab rack stop):

1. Roll the rack ¹⁄₃ to ¹⁄₂ of the way

out of the tub.

2. Rotate the rack stops outward.

3. Roll the rack all the way out of

the track and remove from the
dishwasher.

To replace the rack:

Reverse the above steps 1-3 to
replace the rack into the
dishwasher.

8

CLEANING THE DISHWASHER

†® affresh is a registered trademark of Whirlpool, U.S.A.

Dishwasher Care

Drain air gap

Cleaning the exterior

Clean the exterior of the dishwasher with a soft, damp cloth and
mild detergent. If the dishwasher has a stainless steel exterior, a
stainless steel cleaner is recommended - Stainless Steel Cleaner
and Polish Part Number 31464.

Cleaning the interior

Clean the interior of the dishwasher, with a paste of powdered
dishwasher detergent and water or use liquid dishwasher detergent
on a damp sponge to clean the cooled-down interior.

A white vinegar rinse may remove white spots and film. Vinegar is
an acid, and using it too often could damage the dishwasher.

Put 2 cups (500 mL) white vinegar in a glass or dishwasher-safe
measuring cup on the bottom rack. Run the dishwasher through a
complete washing cycle using an air-dry or an energy-saving dry
option. Do not use detergent. Vinegar will mix with the wash water.

Dishwasher Maintenance Procedure

Removal of Hard Water / Filming: Recommended use of a

monthly maintenance product such as affresh
Cleaner Part Number W10282479.

■ Load the dishwasher (preferably with dishes affected by

filming/hard water).

■ Place tablet in main wash compartment of detergent dispenser.

■ Select cycle/option best for heavily soiled dishes and start

dishwasher.

NOTE: It is recommended to use a premeasured detergent tablet
or pack for regular daily use.

®†

Dishwasher

If you have a drain air gap,
check and clean it if the
dishwasher isn't draining
well.

To Reduce Risk of Property Damage During Vacation or
Extended Time Without Use

■ When you will not be using the dishwasher during the summer

months, turn off the water and power supply to the dishwasher.

■ Make sure the water supply lines are protected against freezing

conditions. Ice formations in the supply lines can increase
water pressure and cause damage to the dishwasher or home.
Damage from freezing is not covered by the warranty.

■ When storing the dishwasher in the winter, avoid water damage

by having the dishwasher winterized by authorized service
personnel.

Troubleshooting

First try the solutions suggested here. If you need further assistance or more recommendations that may help you avoid a service call,
refer to the warranty page in this manual and scan the code with your mobile device, or visit www.maytag.com/product_help.
In Canada, visit www.maytag.ca.

Contact us by mail with any questions or concerns at the address below:
In the U.S.A.:

Maytag Brand Home Appliances
Customer eXperience Center
553 Benson Road
Benton Harbor, MI 49022-2692

Please include a daytime phone number in the correspondence.

PROBLEM SOLUTION
DISHWASHER DOES

NOT RUN

NOTE: It is normal for the dishwasher to repeatedly pause several times during a cycle.

If the START/RESUME light is blinking, press START/RESUME and close the door firmly within
4 seconds.

Press and hold HI TEMP WASH for 3 seconds to turn the audible tones on or off.
Be sure the door is closed and latched.
Be sure you have selected a cycle. See “Cycles and Options Descriptions.”
Be sure there is power to the dishwasher. A circuit breaker or fuse might have tripped.
If lights other than Start/Resume blink and the unit will not run, you will need to call for service.

DETERGENT REMAINS IN THE
DISPENSER OR
TABLET IS ON BOTTOM
OF TUB

Check for dishware such as cookie sheets, cutting boards, or large containers, etc., that may be
blocking the detergent dispenser from opening properly.

Be sure the detergent is fresh and lump free.
Be sure the cycle has been completed (green light is on). If it has not been completed, you will need

to resume the cycle by pressing START/RESUME and closing the door within 4 seconds.

In Canada:

Maytag Brand Home Appliances
Customer eXperience Centre
200 – 6750 Century Ave.
Mississauga, Ontario L5N 0B7

9

PROBLEM SOLUTION
CYCLE RUNS TOO LONG NOTES:

■ Efficient dishwashers run longer to save water and energy. Cycle times may increase depending

on selections (See “Cycles and Options Descriptions” for estimated cycle times.)

■ A water heater setting of 120°F (49ºC) is best. The dishwasher will delay longer while heating

cooler water.
Try the Quick Wash cycle.
Run the hot water at a faucet close to the dishwasher before starting the cycle.

DISHWASHER NOT DRYING NOTE: Plastic and items with nonstick surfaces are difficult to dry because they have a porous

surface, which tends to collect water droplets. Towel drying may be necessary.
Use of rinse aid along with the Heated Dry and Sanitize option will provide the best drying and avoid

excess moisture in the dishwasher interior.
Proper loading of items can affect drying. (See specific loading instructions within this guide.)
Glasses and cups with concave bottoms hold water. This water may spill onto other items when

unloading.

■ Unload the bottom rack first.

■ Place these items on the more slanted side of the rack for improved results.

WILL NOT FILL Be sure the water is turned on to the dishwasher.

Check that the float is free from obstructions.
Check for suds in the dishwasher. If foam or suds are detected, the dishwasher

may not operate properly or may not fill with water.

WATER REMAINS IN THE TUB/
WILL NOT DRAIN

Be sure the cycle has been completed (the green light is on). If the cycle has not been completed, you
will need to resume the cycle by pressing START/RESUME and closing the door within 4 seconds.

If dishwasher is connected to a food waste disposer, be sure the knockout plug has been removed
from the disposer inlet.

Check for kinks in the drain hose.
Check for food obstructions in the drain or garbage disposer.
Check the house fuse or circuit breaker.

HARD WATER
(WHITE RESIDUE ON
DISHWASHER INTERIOR OR
GLASSWARE)

NOTE: Extremely hard water mineral deposits can cause damage to the dishwasher and make it

difficult to achieve good cleaning. A water softener is strongly recommended if the hardness is
15 grains or more. If a water softener is not installed, the following steps may help:

Use a commercial cleaner designed for dishwashers once per month.
Always use a rinse aid.
Always use a high-quality, fresh detergent.
Use a detergent booster/water softener additive designed for dishwashers.

ODORS NOTE: If the dishwasher is not used daily, you can run a rinse cycle with the partial load until a full

load is ready to run.
Run a vinegar rinse through the dishwasher by putting 2 cups (500 mL) of white vinegar in an upright

glass measuring cup in the lower rack. Run a normal cycle with the Heated Dry option turned off. Do
not use detergent.

The dishwasher may not be draining properly, see “WATER REMAINS IN THE TUB/WILL NOT DRAIN”
in “Troubleshooting.”

NOISY NOTES:

■ Surging sounds can occur periodically throughout the cycle while the dishwasher is draining.

■ Normal water valve hissing may be heard periodically.

■ A normal snap sound may be heard when the detergent dispenser opens during the cycle and

when the door is opened at the end of the cycle.

■ Improper installation will affect noise levels.

Be sure the filters are properly installed.
A thumping sound may be heard if items extend beyond the racks and interfere with the wash arms.

Readjust the dishware and resume the cycle.

10

PROBLEM SOLUTION
FOOD SOILS REMAIN

ON DISHES

Be sure the dishwasher is loaded correctly. Improper loading can greatly decrease the washing
performance. See “Prepare and Load the Dishwasher” in the “Dishwasher Use” section.

Select the proper cycle and option for the type of soils. PowerBlast™ with the Sanitize option can be
used for tougher loads.

Be sure the incoming water temperature is at least 120°F (49ºC).
Use the proper amount of fresh detergent. More detergent is needed for heavier-soiled loads and

hard water conditions.
Scrape food from dishes prior to loading (do not prerinse).

DID NOT SANITIZE If the sanitized light is blinking, the load is NOT sanitized. The cycle was interrupted in the final rinse,

or the water heater is set too low. Set the water heater to 120ºF (49ºC).

DAMAGE TO DISHWARE Improper loading can cause dishes to become chipped or damaged. See specific loading instructions

within this guide.

BLINKING LIGHTS If the START/RESUME light is blinking, press START/RESUME and close the door within 4 seconds.

If the Clean light or any other lights are blinking and the dishwasher will not run, call for service.

CLOUDY OR SPOTTED
DISHWARE (AND HARD
WATER SOLUTION)

NOTES:

■ Liquid rinse aid is necessary for drying and to reduce spotting.

■ Use the correct amount of detergent.

Confirm that the cloudiness is removable by soaking the item in white vinegar for 5 minutes. If the
cloudiness disappears, it is due to hard water. Adjust the amount of detergent and rinse aid. See
“HARD WATER (WHITE RESIDUE ON DISHWASHER INTERIOR OR GLASSWARE)” in the
“Troubleshooting” section. If it does not come clear, it is due to etching (see below).

Be sure the incoming water temperature is set at 120°F (49ºC).
Try using the Hi Temp and Sani Rinse options.
To remove spotting, run a vinegar rinse through the dishwasher.

■ Wash and rinse the affected dishware and load into dishwasher. Remove all silverware and metal

items. Put 2 cups (500 mL) of white vinegar in a glass measuring cup in the lower rack. Run a

normal cycle with the Heated Dry option turned off. No detergent is needed.

ETCHING (PERMANENT
CLOUDINESS)

This is an erosion of the surface of the glassware and can be caused by a combination of: water that
is too hot, from using too much detergent with soft water or by pre-washing. Detergent needs food
soil to act upon. If etching has occurred, the glassware is permanently damaged. To avoid further
etching, adjust the detergent amount to match the water hardness, stop pre-washing, and use water
heating options only when incoming water temperature is below 120°F (49ºC).

LEAKING WATER Be sure dishwasher has been installed properly and is level.

Suds can cause the dishwasher to overflow. Measure the detergent accurately and use only
detergents designed for use in a dishwasher. Less detergent is needed in soft water. Try another
brand of detergent if sudsing continues.

To avoid rinse aid leaking from the dispenser, be sure the lid is securely attached and avoid overfilling.

TUB IS DISCOLORED NOTES:

■ High iron content in the water can discolor the tub.

■ Tomato-based foods can discolor the tub or dishware.

A citrus-based cleaner can be used to clean.

11

ATTACH YOUR RECEIPT HERE. PROOF OF PURCHASE IS REQUIRED

https://www.maytag.com/

product_help

W10599489B

®

/™ ©2014. Used under license in Canada. All rights reserved.

9/14

Printed in U.S.A.

TO OBTAIN WARRANTY SERVICE.

MAYTAG® DISHWASHER

LIMITED WARRANTY

Please have the following information available when you call the Customer
eXperience Center:

■ Name, address and telephone number

■ Model number and serial number

■ A clear, detailed description of the problem

■ Proof of purchase including dealer or retailer name and address

IF YOU NEED SERVICE:

1. Before contacting us to arrange service, please determine whether your product requires repair. Some questions

can be addressed without service. Please take a few minutes to review the Troubleshooting or Problem Solver
section of the Use and Care Guide, scan the QR code on the right to access additional resources,
or visit https://www.maytag.com/product_help.

2.

All warranty service is provided exclusively by our authorized Maytag Service Providers. In the U.S. and

Canada, direct all requests for warranty service to:

Maytag Customer eXperience Center

In the U.S.A., call 1-800-688-9900. In Canada, call 1-800-807-6777.

If outside the 50 United States or Canada, contact your authorized Maytag dealer to determine whether another warranty applies.

TEN YEAR LIMITED WARRANTY

WHAT IS COVERED WHAT IS NOT COVERED

FIRST YEAR LIMITED WARRANTY (PARTS AND LABOR)

For one year from the date of purchase, when this major appliance is
installed, operated and maintained according to instructions attached
to or furnished with the product, Maytag brand of Whirlpool
Corporation or Whirlpool Canada, LP (hereafter “Maytag”) will pay for
factory specified replacement parts and repair labor to correct defects
in materials or workmanship that existed when this major appliance
was purchased, or at its sole discretion replace the product. In the
event of product replacement, your appliance will be warranted for the
remaining term of the original unit's warranty period.

SECOND THROUGH TENTH YEAR LIMITED WARRANTY

(CERTAIN COMPONENT PARTS ONLY - LABOR NOT INCLUDED)

In the second through tenth years from the date of original purchase,
when this major appliance is installed, operated and maintained
according to instructions attached to or furnished with the product,
Maytag will pay for factory specified parts for the following
components to correct non-cosmetic defects in materials or
workmanship in these parts that prevent function of this major
appliance and that existed when this major appliance was purchased.
This is a limited 10-year warranty on the below named parts only and
does not include repair labor.

■ Upper and Lower Racks (excludes cup shelves and silverware

basket)

■ Chopper Blade

■ Stainless Steel Tub and Inner Door Liner

YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED
WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED HEREIN.
Service must be provided by a Maytag designated service company.
This limited warranty is valid only in the United States or Canada and
applies only when the major appliance is used in the country in which it
was purchased. This limited warranty is effective from the date of
original consumer purchase. Proof of original purchase date is required
to obtain service under this limited warranty.

1. Commercial, non-residential or multiple-family use, or use inconsistent

with published user, operator or installation instructions.

2. In-home Instruction on how to use your product

3. Service to correct improper product maintenance or installation,

installation not in accordance with electrical or plumbing codes or
correction of household electrical or plumbing (i.e. house wiring, fuses
or water inlet hoses).

4. Consumable parts (i.e. light bulbs, batteries, air or water filters, etc.).

5. Damage from accident, misuse, abuse, fire, floods, acts of God or use

with products not approved by Maytag.

6. Repairs to parts or systems to correct product damage or defects

caused by unauthorized service, alteration or modification of the
appliance.

7. Cosmetic damage including scratches, dents, chips, and other damage

to appliance finishes unless such damage results from defects in
materials and workmanship and is reported to Maytag within 30 days.

8. Discoloration, rust or oxidation of surfaces resulting from caustic or

corrosive environments including but not limited to high salt
concentrations, high moisture or humidity or exposure to chemicals.

9. Pick-up or delivery. This product is intended for in-home repair.

10. Travel or transportation expenses for service in remote locations where

an authorized Maytag servicer is not available.

11. Removal or reinstallation of inaccessible appliances or built-in fixtures

(i.e. trim, decorative panels, flooring, cabinetry, islands, countertops,
drywall, etc.) that interfere with servicing, removal or replacement of the
product.

12. Service or parts for appliances with original model/serial numbers

removed, altered or not easily determined.

The cost of repair or replacement under these excluded circumstances
shall be borne by the customer.

DISCLAIMER OF IMPLIED WARRANTIES

IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR IMPLIED WARRANTY OF FITNESS FOR A
PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW. Some states and provinces do not allow
limitations on the duration of implied warranties of merchantability or fitness, so this limitation may not apply to you. This warranty gives you
specific legal rights, and you also may have other rights that vary from state to state or province to province.

DISCLAIMER OF REPRESENTATIONS OUTSIDE OF WARRANTY

Maytag makes no representations about the quality, durability, or need for service or repair of this major appliance other than the representations
contained in this warranty. If you want a longer or more comprehensive warranty than the limited warranty that comes with this major appliance,
you should ask Maytag or your retailer about buying an extended warranty.

LIMITATION OF REMEDIES; EXCLUSION OF INCIDENTAL AND CONSEQUENTIAL DAMAGES

YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED HEREIN. MAYTAG
SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states and provinces do not allow the exclusion or limitation
of incidental or consequential damages, so these limitations and exclusions may not apply to you. This warranty gives you specific legal rights, and
you also may have other rights that vary from state to state or province to province.

2/14

LE AGRADECEMOS la compra de este producto de alta calidad. Registre su nuevo lavavajillas en www.maytag.com . En Canadá,

INSTRUCCIONES PARA EL USUARIO DE LA

LAVAVAJILLAS

Si no sigue las instrucciones de inmediato, usted puede
morir o sufrir una lesión grave.

Si no sigue las instrucciones, usted puede morir o sufrir
una lesión grave.

Todos los mensajes de seguridad le dirán el peligro potencial, le dirán cómo reducir las posibilidades de sufrir una lesión y lo que
puede suceder si no se siguen las instrucciones.

Su seguridad y la seguridad de los demás es muy importante.

Hemos incluido muchos mensajes importantes de seguridad en este manual y en su electrodoméstico. Lea y obedezca siempre

todos los mensajes de seguridad.

ADVERTENCIA

PELIGRO

Este es el símbolo de advertencia de seguridad.
Este símbolo le llama la atención sobre peligros potenciales que pueden ocasionar la muerte o una lesión a

usted y a los demás.
Todos los mensajes de seguridad irán a continuación del símbolo de advertencia de seguridad y de la palabra

“PELIGRO” o “ADVERTENCIA”. Estas palabras significan:

registre su lavavajillas en www.maytag.ca.
Para referencia futura, tome nota del número de modelo y de serie del producto. Los puede encontrar cerca de la puerta en el lado

derecho o izquierdo del interior de la lavavajillas

Número de modelo_________________________________________ Número de serie__________________________________________

Índice

SEGURIDAD DE LA LAVAVAJILLAS ..................................... 13

PASOS RÁPIDOS ..................................................................... 15

USO DE LA LAVAVAJILLAS.................................................... 15

DESCRIPCIÓN DE CICLOS Y OPCIONES............................. 18

SECCIÓN DE INFORMACIÓN PROVISTA POR LA

LAVAVAJILLAS......................................................................... 20

CARACTERÍSTICAS DE LA LAVAVAJILLAS ......................... 21

CUIDADO DE LA LAVAVAJILLAS...........................................22

SOLUCIÓN DE PROBLEMAS ................................................. 23

GARANTÍA ................................................................................ 26

Seguridad de la lavavajillas

13