How it Works
Maytag
Loading...
MCS 16021937
User Manual
7 pgs478.94 Kb0

Maytag MCS 16021937 User Manual

GUIDE
JENN-AIR BOTTOM FREEZER REFRIGERATOR
USER
USER
GUIDE
ABLE OF CONTENTS
T
Form No. B/10/02 Part No. 12642718 MCS No. 16021782 Printed in U.S.A.
©2002 Maytag Appliances Sales Co.
Important Safety Information............................................3
Installation Instructions...................................................4-9
How to Remove the Doors and Hinges .....................4
How to Reverse Refrigerator Door.............................5
How to Install and Remove Handles............................5
How to Replace the Doors and Hinges......................6
How to Install and Remove Panels...............................6
How to Remove and Install the Pullout Drawer.......7
How to Connect the Water Supply..............................8
How to Level Your Refrigerator ....................................9
Temperature Controls......................................................10
Fresh Food Features....................................................11-12
Water Dispenser.............................................................11
Interior Shelves................................................................11
Door Storage...................................................................11
Climate-Controlled Drawers .......................................12
Accessories .......................................................................12
Automatic Ice Maker......................................................13
Drawers.............................................................................13
Accessories .......................................................................13
Water Filter Data..............................................................15
Hints and Care ...................................................................16
Cleaning Instructions......................................................16
How to Remove and Replace Light Bulbs ................17
Food Storage Tips ..............................................................18
Food Storage Chart ..........................................................19
Normal Operating Sounds ..............................................20
Before You Call For Service ......................................21-22
Warranty..............................................................................23
Guide de L’Utilisateur.......................................................25
Guía del Usuario................................................................49
1. Unplug power cord from power source.
2. Remove toe grille and bottom bracket covers.
3. Remove the top trim of fresh food door with Phillips screwdriver.
• Retain screws and trim for
replacement.
4. Unscrew
5
⁄16" hex
head screws from top hinge to remove hinge.
• Retain all screws for later use.
5. Lift refrigerator door from center hinge pin.
6. Remove center hinge pin with a
5
⁄16"
hex nut driver.
• Retain hinge pin
for later use.
7. Remove Phillips screws to remove center hinge.
• Retain all screws for later use.
8. Remove both stabilizing brackets with
3
⁄8" hex head driver.
• Retain screws for later use.
4
I
NSTALLATIONINSTRUCTIONS
These instructions were provided to aid you in the installation of your refrigerator.
MEASURING THE OPENING
A
1
⁄2" of air space should be provided for
the back of the unit to allow for the power cord and water line. When installing your unit, measure carefully.
Subflooring or floor coverings (i.e. carpet, tile, wood floors, rugs) may make your opening smaller than anticipated.
Some clearance may be gained by using the leveling procedure on page 9.
IMPORTANT: If unit is to be installed into a recess where top of unit is completely covered,use dimensions from floor to top of hinge cap to verify proper clearance.
TRANSPORTING YOU REFRIGERATOR
Follow these tips when moving the unit to final location:
➢ NEVER transport unit on its side. If
an upright position is not possible, lay unit on its back. Allow unit to sit upright for approximately 30 minutes prior to plugging unit in to assure oil return to the compressor. Plugging unit in immediately may cause damage to internal parts.
➢ Use an appliance dolly when moving
unit.
ALWAYS truck unit from its
side–
NEVER from its front or back.
➢ Protect outside finish of unit during
transport by wrapping cabinet in blankets or inserting padding between the unit and dolly.
➢ Secure unit to dolly firmly with straps
or bungee cords. Thread straps through handles when possible.
DO
NOT
overtighten. Overtightening restraints may dent or damage outside finish.
SELECTING THE BEST LOCATION
➢ Allow for a free flow of air through
the front base grille.
➢ Install the refrigerator where the
room temperature will not go below 55° F. With temperatures below 55° F, the refrigerator will not run frequently enough to maintain proper temperature in the freezer.
➢ Locate the refrigerator away from
heat producing appliances such as the range or dishwasher, heat vents and direct sunlight.
➢ A minimum of
1
⁄2" clearance is required
at the back. Allow
1
⁄2" at the sides for
ease of installation. If refrigerator is placed with the door hinge side against a wall, you may want to allow additional space.
➢ Use caution when installing the
refrigerator on vinyl or hardwood floors so as not to mark or otherwise damage the flooring. A piece of plywood, a rug or other material should be used to protect the floor while positioning the refrigerator.
HOW TO REMOVE THE DOOR AND HINGES
Some installations require door removal to transport refrigerator to its final location.
To remove drawer, see instructions on page 7.
To avoid electrical shock which can cause severe personal injury or death, observe the following:
➢ Disconnect power to refrigerator
before removing doors. Connect power only after replacing doors.
WARNING:
To avoid damage to walls and flooring, protect soft vinyl or other flooring with cardboard, rugs or other protective material.
CAUTION:
5
HOW TO REVERSE REFRIGERATOR DOOR
DOORS WITH TRIM AND PANELS
1. Perform all steps listed in How to Remove the Door and Hinges.
2. Perform removal steps listed in
How
to Remove and Install Handles.
3. Transfer cabinet plugs and screws to opposite side of cabinet.
4. Remove plugs with flat blade of screwdriver wrapped in masking tape.
5. Remove center mullion screws with
5
⁄16" hex head driver.
6. Locate door stop (B) and door cap (A) on bottom edge of fresh food door. Remove with a Phillips screwdriver.
• Retain all items for later replacement.
7. Remove side door trim (A) and handle side trim (B) from door by tapping bottom edges upward with a soft rubber mallet.
• Trim will slide up approximately
3
⁄4"
and release from door.
8. Rotate door panel 180° and tape in place.
9. Remove top door extension with
1
⁄4" hex
head driver. Flip door extension (A) so notched corner turns in toward interior of door (B).
10. Retrieve alternate side door trim shipped with refrigerator. Install trim by aligning notches of trim with metal mounting tabs on side of door.
• Slide trim down until piece locks
into place.
• Tap top of trim with rubber mallet
to insure snug fit.
• Repeat same procedure to install
handle side trim removed in step 7.
11. Replace bottom door cap (A) removed in step 6. Install door stop (B) on opposite side of door.
12. Remove tape from panels.
13. Proceed to next column to reinstall handle.
To avoid possible injury and damage to property, tape decorative panels (some models) securely into place before removing side door trim and handles.
WARNING:
A
B
B
A
A
B
Note:
When working directly on door, lay
the interior side of the door down flat, nonabrasive surface. If using a floor or table, prepare working surface with rugs or towels to avoid damage to door finish.
HOW TO INSTALL AND REMOVE HANDLES
In some cases, handles may need to be removed to transport unit through tight spaces, reverse doors, or install panels.
Some models may come with handles shipped separate from the refrigerator door.
INSTALLING HANDLES
1. Retrieve handle from shipping material (some models).
2. Locate handle mounting posts on face of door
.
3. Position handle over mounting posts.
4. Tighten set screws (A) with a
3
⁄32" Allen
wrench
REMOVING HANDLES
1. Locate set screws in handle and loosen set screws with a
3
⁄32" Allen
wrench.
2. Lift handle from handle mounting posts to remove.
Note:
In cases of door reversal, panel installation, or panel removal, the mounting posts must be removed. Use a
1
⁄4" hex head driver
to remove the post from the door.
A
B
A
Loading...
+ 4 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use