Maytag MCD2358WEW01, MCD2358WEM01, MCD2358WEB01 Owner’s Manual

THANK YOU for purchasing this high-quality product. If you should experience a problem not covered in TROUBLESHOOTING,
please visit our website at www.maytag.com for additional information. If you still need assistance, call us at 1-800-688-9900.
In Canada, visit our website at www.maytag.ca or call us at 1-800-807-6777.

You will need your model and serial number, located on the inside wall ofthe refrigerator compartment.

Para obtener acceso a "lnstrucciones para el usuario del refrigerador" en espa_ol, o para obtener informaci6n adicional acerca de
su producto, visite: www.maytag.com.

Necesitara su nQmero de modelo y de serie, ubicado en el interior del compartimiento del refrigerador.

Table of Contents / Table des rnati res

REFRIGERATOR SAFETY ........................................................ 1

REFRIGERATOR USE ............................................................... 2

REFRIGERATOR CARE ............................................................ 6

TROUBLESHOOTING ............................................................... 7

ACCESSORIES .......................................................................... 9

WATER FILTER CERTIFICATIONS ....................................... 10

PERFORMANCE DATA SHEETS ........................................... 11

WAR RANTY ............................................................................. 15

SleCURITle DU RleFRIGleRATEUR ......................................... 17

UTILISATION OU RleFRIGleRATEUR .................................... 18

ENTRETIEN DU RleFRIGleRATEUR ....................................... 23

DI=PANNAGE ........................................................................... 24

ACCESSOIRES ........................................................................ 26

FEUlLLES DE DONNI=ES SUR LA PERFORMANCE ........... 27

GARANTIE ............................................................................... 31

REFRIGERATOR SAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."

These words mean:

You can be killed or seriously injured if you don't immediately

follow instructions.

You can be killed or seriously injured if you don't follow
instructions.

All safety messages willtell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.

W10168310A

IMPORTANT SAFETY INSTRUCTIONS

WARNING: To reduce the risk of fire, electric shock, or injury when using your refrigerator, follow these basic precautions:

• Plug into a grounded 3 prong outlet.

• Do not remove ground prong.

• Do not use an adapter.

• Do not use an extension cord.

• Disconnect power before servicing.

• Replace all parts and panels before operating.

• Remove doors from your old refrigerator.

SAVE THESE INSTRUCTIONS

• Use nonflammable cleaner.

• Keep flammable materials and vapors, such as gasoline,
away from refrigerator.

• Use two or more people to move and install refrigerator.

• Disconnect power before installing ice maker (on ice maker
kit ready models only).

• Use a sturdy glass when dispensing ice (on some models).

Proper Disposal of Your Old Refrigerator

Suffocation Hazard

Remove doors from your old refrigerator.
Failure to do so can result in death or brain damage.

IMPORTANT: Child entrapment and suffocation are not problems
of the past. Junked or abandoned refrigerators are still dangerous

- even if they will sit for "just a few days." If you are getting rid of
your old refrigerator, please follow these instructions to help
prevent accidents.

REFRIGERATOR USE

Temperature Control Adjustment and Cooling On/Off
The refrigerator and freezer control buttons are located on the

dispenser panel.

_._Cube _ F_GOOD (_ Fast Ice

ICE LIGHT TEMPERATURE FILTER STATUS UNLOCKED FEATURES

To turn cooling off, press and hold the LOCK and FAST ICE/
COOL buttons at the same time for 3 seconds. Press and hold

LOCK and FAST ICE/COOL again to turn cooling on. Your
refrigerator and freezer will not cool when cooling is off.

IMPORTANT: To avoid unintentionally locking the dispenser
or changing other settings, be sure to press both buttons at
exactly the same time.

FastCool

Before You Throw Away Your Old Refrigerator or Freezer:

• Takeoff the doors.

• Leave the shelves in place so that children may not easily
climb inside.

For your convenience, your refrigerator and freezer controls are
preset at the factory. When you first install your refrigerator, make
sure that the controls are still set to the "mid-settings."

To view set points, press the TEMPERATURE button on your

dispenser panel. The factory recommended set points are
0°F (-18°C) for the freezer and 37°F (3°C) for the refrigerator.

IMPORTANT:

• Wait 24 hours before you put food into the refrigerator. If you
add food before the refrigerator has cooled completely, your
food may spoil.

NOTE: Adjusting the set points to a higher (colder) than
recommended setting will not cool the compartments any

faster.

• If the temperature is too warm or too cold in the refrigerator or
freezer, first check the air vents to be sure they are not
blocked before adjusting the controls.

• The preset settings should be correct for normal household
usage. The controls are set correctly when milk or juice is as
cold as you like and when ice cream is firm.

2

Wait at least 24 hours between adjustments. Recheck the
temperatures before other adjustments are made.

The display screen on the dispenser control panel has a
backlight, which will turn off automatically when the control

buttons have not been used for 30 seconds or more. When
the backlight is off, the first press of a control button will only

reactivate the backlight, without changing any settings.
Within 30 seconds after the backlight has been reactivated,
additional presses of control buttons will change the
applicable settings.

Adjusting the Controls

To adjust the set points, press and hold the TEMPERATURE
button for 3 seconds. When adjust mode is activated, set points
and adjusting information will appear on the display screen.

oo I--I°F

tSuggested

FREEZER U

(REFRIGERATOR

Additional Features

NOTE: The display screen on the dispenser control panel has a
backlight, which will turn off automatically when the control

buttons have not been used for 30 seconds or more. When the
backlight is off, the first press of a control button will only

reactivate the backlight, without changing any settings. Within
30 seconds after the backlight has been reactivated, additional
presses of control buttons will change the applicable settings.

Fast Cool and Fast Ice

The Fast Cool feature assists with periods of heavy ice usage, full

grocery loads, or temporarily warm room temperatures.

The Fast Ice feature assists with temporary periods of heavy ice

use by increasing ice production.

• Press the FAST ICE/COOL button to turn on the Fast Cool
feature. When the feature turns on, the "Fast Cool" animation

will appear on the dispenser display.

X

r • • ] SETI EXIT °F I°C

NOTE: To view Celsius temperatures, press the FILTER button
when adjust mode is activated. To return the display setting to
Fahrenheit, press FILTER again.

Refrigerator Controls
When adjust mode is activated, the LOCK and FAST ICE/COOL

buttons adjust the refrigerator compartment temperature. The set
point range for the refrigerator is 33°F to 45°F (0°C to 7°C).

• Press LOCK to lower the set point.

• Press FAST ICE/COOL to raise the set point.
Freezer Controls

When adjust mode is activated, the ICE and LIGHT buttons
adjust the freezer compartment temperature. The set point range

for the freezer is -5°F to 5°F (-21°C to -15°C).

• Press ICE to lower the set point.

• Press LIGHT to raise the set point.

CONDITION: TEMPERATURE

ADJUSTMENT:

REFRIGERATOR too cold REFRIGERATOR Setting

1° higher

REFRIGERATOR too warm REFRIGERATOR Setting

1° lower

FREEZER too cold FREEZER Setting

1° higher

FREEZER too warm/too little ice FREEZER Setting

1° lower

Press TEMPERATURE to exit adjust mode, or allow about
15 seconds of inactivity and adjust mode will turn off

automatically.

I

The Fast Cool setting will remain on for 24 hours unless
manually turned off.

• Press FAST ICE/COOL again to turn off Fast Cool and turn on
the Fast Ice feature. When the feature turns on, the "Fast Ice"

animation will appear on the dispenser display.

dd

The Fast Ice setting will remain on for a minimum of
90 minutes unless manually turned off.

• Press FAST ICE/COOL a third time to activate Fast Cool and
Fast Ice at the same time. When the features are activated,

both the "Fast Cool" and "Fast Ice" animations will appear on
the dispenser display.

• Press FAST ICE/COOL a fourth time to turn both Fast Cool
and Fast Ice off.

When Fast Cool and/or Fast Ice are active, the temperature
display will not change. After 24 hours, the refrigerator returns to
the previous temperature set points.

NOTE: If increased ice production is desired at all times, change
the freezer control to a lower setting. Setting the freezer to a
colder temperature may make some foods, such as ice cream,

harder.

Temperature Display Always On
This feature keeps the temperature display on at all times.

• Press and hold TEMPERATURE and LOCK at the same time
for 3 seconds to turn the feature on.

IMPORTANT: To avoid unintentionally locking the dispenser
or changing other settings, be sure to press both buttons at
exactly the same time.

• Press and hold TEMPERATURE and LOCK at the same time
for 3 seconds again to turn the feature off.

Door Ajar Alarm

The Door Ajar Alarm feature sounds an alarm when the

refrigerator or freezer door is open for 5 minutes and the product
cooling is turned on. The alarm will repeat every 2 minutes. Close

both doors to turn it off. The feature then resets and will
reactivate when either door is left open again for 5 minutes.

DisablingSounds

• Toturnoffalldispenserandcontrolsounds,includingthe
DoorAjarAlarm,pressandholdICEandFASTICE/COOLat

thesametimefor3seconds.

• Toturnallsoundsbackon,pressandholdICEandFASTICE/
COOLatthesametimefor3secondsagain.

Thecontrolcanbeadjustedtoproperlychillmeatsorvegetables.
Theairinsidethepaniscooledtoavoid"spot"freezingandcan
besettokeepmeatsattheNationalLivestockandMeatBoard
recommendedstoragetemperaturesof28°to32°F(-2°to0°C).
Theconvertibledrawertemperaturecontrolispresettothe
PRODUCEsetting.

Tostoremeat:
SetthecontroltooneofthethreeMEATsettingstostoremeatat

itsoptimalstoragetemperature.
Tostorevegetables:
SetthecontroltoPRODUCEtostorevegetablesattheiroptimal

storagetemperatures.
NOTE:Iffoodstartstofreeze,movethecontroltotheleft(less

cold).Remembertowait24hoursbetweenadjustments.

_o__o_'_:t_o_:_/_¸)

Youcancontroltheamountofhumidityinthemoisture-sealed
crisper.AdjustthecontroltoanysettingbetweenLOWand

HIGH.
LOW(open)forbeststorageoffruitsandvegetableswithskins.

HIGH(closed)forbeststorageoffresh,leafyvegetables.

Depending on your model,you may have one ormore ofthe
followingoptions:theabilitytoselecteithercrushed orcubed
ice,a speciallightthatturnson when you use thedispenser,or a
lockoptiontoavoidunintentionaldispensing.

NOTES:

• The dispensingsystem willnotoperatewhen thefreezerdoor
isopen.

• Afterconnectingtherefrigeratorto a watersource,flushthe
watersystem.Use a sturdycontainertodepressand hold the
waterdispenserleverfor5 seconds,thenreleaseitfor
5 seconds. Repeat untilwaterbeginsto flow.Once water
beginsto flow,continuedepressingand releasingthe
dispenserlever(5seconds on,5 seconds off)foran

additional5 minutes.Thiswillflushairfrom thefilterand
waterdispensingsystem.Additionalflushingmay be required

insome households.As airisclearedfromthesystem,water
may spurtoutofthe dispenser.

• Allow24 hoursfortherefrigeratortocooldown and chill
water.

Allow 24 hours to produce the first batch of ice. Discard the
first three batches of ice produced.

The display screen on the dispenser control panel has a
backlight, which will turn off automatically when the control

buttons have not been used for 30 seconds or more. When
the backlight is off, the first press of a control button will only

reactivate the backlight, without changing any settings.
Within 30 seconds after the backlight has been reactivated,
additional presses of control buttons will change the
applicable settings.

The Water Dispenser

Thedoorchillcontrolislocatedontheleft-handsideofthe
refrigeratorcompartment,

• Turnthecontrolclockwise(right)toreducetheflowofcoldair
tothedoorandmakeit lesscold,

• Turnthecontrolcounterclockwise(left)toincreasetheflowof
coldairtothedoorandmakeitcolder,

@

IMPORTANT: Dispense enough water every week to maintain a
fresh supply.

To Dispense Water:

1. Press a sturdy glass against the water dispenser lever.

2. Remove the glass to stop dispensing.

The Ice Dispenser

Ice dispenses from the ice maker storage bin in the freezer when
the dispenser lever is pressed. The dispensing system will not
operate when the freezer door is open. To turn off the ice maker,
see "Ice Maker and Storage Bin."

Your ice maker can produce both crushed and cubed ice. Before
dispensing ice, select which type of ice you prefer by pressing

the ICE button.

The display screen indicates which type of ice is selected.

• i_

"""

CRUSHED CUBED

For crushed ice, cubes are crushed before being dispensed. This
may cause a slight delay when dispensing crushed ice. Noise
from the ice crusher is normal, and pieces of ice may vary in size.
When changing from crushed to cubed, a few ounces of crushed
ice will be dispensed along with the first cubes.

To Dispense Ice:

1. Press the button to select the desired type of ice.

Cut Hazard

Use a sturdy glass when dispensing ice.
Failure to do so can result in cuts.

2. Press a sturdy glass against the ice dispenser lever. Hold the
glass close to the dispenser opening so ice does not fall
outside of the glass.

IMPORTANT: You do not need to apply a lot of pressure to
the lever in order to activate the ice dispenser. Pressing hard
will not make the ice dispense faster or in greater quantities.

3. Remove the glass to stop dispensing.
NOTE: Ice may continue to dispense for up to 10 seconds

after removing the glass from the lever. The dispenser may
continue to make noise for a few seconds after dispensing.

The Dispenser Light (on some models)

When you use the dispenser, the light will automatically turn on.
If you want the light to be on continuously, you may choose either
ON or DIM. The display screen indicates which mode is selected.

8 ....

Turning the Ice Maker On/Off

The On/Off switch is located on the top right-hand side of the

freezer compartment.

• To turn on the ice maker, slide the control to the ON (left)
position.

• To manually turn off the ice maker, slide the control to the
OFF (right) position.

NOTE: Your ice maker has an automatic shutoff. The ice maker
sensors will automatically stop ice production, but the control will

remain in the ON (left) position.

REMEMBER:

• Allow 24 hours to produce the first batch of ice. Discard the
first three batches of ice produced.

• The quality of your ice will be only as good as the quality of
the water supplied to your ice maker. Avoid connecting the
ice maker to a softened water supply. Water softener
chemicals (such as salt) can damage parts of the ice maker
and lead to poor quality ice. If a softened water supply cannot
be avoided, make sure the water softener is operating
properly and is well maintained.

• Do not use anything sharp to break up the ice in the storage
bin. This can cause damage to the ice container and the
dispenser mechanism.

• Do not store anything on top of or inthe ice maker or storage
bin.

Removing and Replacing Ice Storage Bin

ON DIM OFF

ON: Press LIGHT to turn the dispenser light on.
DIM: Press LIGHT a second time to select DIM mode. The

dispenser light will remain on, but at a lower intensity.
OFF: Press LIGHT a third time to turn the dispenser light off.
The dispenser lights are LEDs that cannot be changed. If it

appears that your dispenser lights are not working, see
"Troubleshooting" for more information.

The Dispenser Lock (on some models)

The dispenser can be turned off for easy cleaning or to avoid
unintentional dispensing by small children and pets.

NOTE: The lock feature does not shut off power to the
refrigerator, to the ice maker, or to the dispenser light. It simply
deactivates the dispenser controls and levers. To turn off the ice
maker, see "Ice Maker and Storage Bin."

• Press and hold LOCK for 3 seconds to lock the dispenser.

• Press and hold LOCK a second time to unlock the dispenser.
The display screen indicates when the dispenser is locked.

LOCKED UNLOCKED

1. Hold the base of the storage bin with both hands and press
the release button to lift the storage bin up and out.

NOTE: It is not necessary to turn the ice maker control to the
OFF (right) position when removing the storage bin. The
sensor cover ("flipper door") on the left wall of the freezer
stops the ice maker from producing ice if the door is open or
the storage bin is removed.

2. Replace the storage bin on the door and push down to make
sure it is securely in place.

J

Donotusewithwaterthatismicrobiologicallyunsafeorof
unknownqualitywithoutadequatedisinfectionbeforeor
afterthesystem.

WaterFilterStatus Light (on some models)

The water filter status light will help you know when to change
your water filter. When the water filter status display changes
from "GOOD" to "ORDER," this tells you that it is almost time to
change the water filter cartridge. Replace the water filter
cartridge when the water filter status display changes to
"REPLACE." If water flow to your water dispenser or ice maker
decreases noticeably, change the filter sooner. The filter should
be replaced at least every 6 months depending on your water
quality and usage.

After changing the water filter, reset the status light by pressing
and holding the FILTER button for 3 seconds. The status light will
change from "REPLACE" to "GOOD" when the system is reset.

Changing the Water Filter

1. Press the eject button to release the filter from the base grille.

2. Pull the filter straight out.

3. Turn the cap counterclockwise to remove it from the filter.
IMPORTANT: Do not discard the cap. It is part of your

refrigerator. Keep the cap to use with the replacement filter.

4. Align the ridge on the cap with the arrow on the new filter and
turn the cap until it snaps into place.

NOTE: You can run the dispenser without a filter. Your water
will not be filtered. Simply insert the cap all of the way into the
base grille and rotate the cap until it is firmly in place.

5. Remove the covers from the O-rings. Be sure the O-rings are
still in place after the covers are removed.

6. Push the filter into the base grille. The eject button will pop
back out when the filter is fully engaged.

7. Flush the water system. See "Water and Ice Dispensers."

REFRIGERATOR CARE

Explosion Hazard

Use nonflammable cleaner.
Failure to do so can result in death, explosion, or fire.

Both the refrigerator and freezer sections defrost automatically.
However, clean both sections about once a month to avoid
buildup of odors. Wipe up spills immediately.

IMPORTANT: Because air circulates between both sections, any
odors formed in one section will transfer to the other. You must

thoroughly clean both sections to eliminate odors. To avoid odor
transfer and drying out of food, wrap or cover foods tightly.

To Clean Your Refrigerator:
NOTE: Do not use abrasive or harsh cleaners such as window

sprays, scouring cleansers, flammable fluids, cleaning waxes,
concentrated detergents, bleaches or cleansers containing
petroleum products on plastic parts, interior and door liners or
gaskets. Do not use paper towels, scouring pads, or other harsh
cleaning tools.

1. Unplug refrigerator or disconnect power.

2. Hand wash, rinse, and dry removable parts and interior
surfaces thoroughly. Use a clean sponge or soft cloth and a
mild detergent in warm water.

3. Wash stainless steel and painted metal exteriors with a clean
sponge or soft cloth and a mild detergent in warm water.

4. On some models, wash glass door panels with a clean
sponge or soft cloth and a mild detergent in warm water.

NOTES:

Do not hit the glass with pots, pans, furniture, toys, or
other objects. Scratching, hitting, jarring or stressing the
glass may weaken its structure, causing an increased risk
of breakage at a later date.

• Do not close the doors until all shelves, drawers and bins

are in place.

5=

There is no need for routine condenser cleaning in normal
home operating environments. If the environment is
particularly greasy or dusty, or there is significant pet traffic in
the home, the condenser should be cleaned every 2 to
3 months to ensure maximum efficiency.

If you need to clean the condenser:

• Remove the base grille.

• Use a vacuum cleaner with a soft brush to clean the grille,

the open areas behind the grille and the front surface area
of the condenser.

• Replace the base grille when finished.

6. Plug in refrigerator or reconnect power.

6

NOTE: Not all bulbs will fit your refrigerator. Be sure to replace
the bulb with one of the same size, shape and wattage.
Replacement bulbs are available from your dealer.

• The dispenser lights are LEDs that cannot be changed.

• All other lights require a 40-watt bulb.

1. Unplug refrigerator or disconnect power.

2. Remove light shield when applicable.
NOTE: To clean the light shield, wash it with warm water and

liquid detergent. Rinse and dry the shield well.

3. Remove light bulb and replace with one of the same size,
shape and wattage.

4. Replace light shield when applicable.

5. Plug in refrigerator or reconnect power.

TROUBLESHOOTING

First try the solutions suggested here or visit our website and reference FAQs (Frequently Asked Questions)

to possibly avoid the cost of a service call.

In the U.S.A., www.maytag.com In Canada, www.maytag.ca

The refrigerator will not operate

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.
Do not use an adapter.

Do not use an extension cord.
Failure to follow these instructions can result in death,

fire, or electrical shock.

• Power cord unplugged? Plug into a grounded 3 prong
outlet.

• Is outlet working? Plug in a lamp to see if the outlet is
working.

• Household fuse blown or circuit breaker tripped? Replace
the fuse or reset the circuit breaker. If the problem continues,

call an electrician.

• Are controls on? Make sure the refrigerator controls are on.
See "Using the Controls."

• New installation? Allow 24 hours following installation for the
refrigerator to cool completely.

NOTE: Adjusting the temperature controls to coldest setting will
not cool either compartment more quickly.

The motor seems to run too much

Your new refrigerator may run longer than your old one due to its
high-efficiency compressor and fans. To maximize energy
efficiency, the compressor changes speed to provide just the
right amount of cooling as it is needed. Your refrigerator may run
as much as 100% of the time, but it will still use less energy than
an older refrigerator. You may notice that it runs more often when
the room is warm, a large amount of food is added to either
compartment, or the doors are opened often.

The refrigerator is noisy

Refrigerator noise has been reduced over the years. Due to this
reduction, you may hear intermittent noises from your new
refrigerator that you did not notice from your old model. Below
are listed some normal sounds with an explanation.

• Buzzing - heard when the water valve opens to fill the ice
maker

• Pulsating - fans/compressor adjusting to optimize
performance

• Rattling - flow of refrigerant, water line, or from items placed
on top of the refrigerator

• Sizzling/Gurgling - water dripping on the heater during
defrost cycle

• Popping - contraction/expansion of inside walls, especially
during initial cool-down

• Water running - may be heard when ice melts during the
defrost cycle and water runs into the drain pan

• Creaking/Cracking - occurs as ice is being ejected from the
ice maker mold.

The doors will not close completely

Items in meat pan/crisper are freezing

Check the following:

• Are food packages blocking the door open?

• Are all bins and shelves pushed back into the correct
positions?

The doors are difficult to open

Explosion Hazard

Use nonflammable cleaner.
Failure to do so can result in death, explosion, or fire.

• Are the gaskets dirty or sticky? Clean gaskets with mild
soap and warm water.

• Has the door been opened and closed within the last few
seconds? Wait at least 30 seconds to reopen the doors.

Temperature is too warm

Check the following:

• Are the air vents blocked in either compartment?

• Are the door(s) opened often?

• Has a large amount of food just been added to the
refrigerator or freezer?

• Are the controls set correctly for the surrounding conditions?

There is interior moisture buildup

NOTE: Some moisture is normal.

• Are the air vents blocked inthe refrigerator?

• Are the door(s) opened often?

• Is the room humid?

• Are the controls set correctly for the surrounding conditions?

• Was an automatic self-defrost cycle completed?

The temperature inside the meat pan/crisper may become too

cold, especially when using some additional control panel
features. Adjust the meat pan control to the closed setting.

The ice maker is not producing ice or not enough ice

• Is the ice maker wire shutoff arm or switch (depending on
models) in the OFF position?

• Is the water line shutoff valve to the refrigerator turned on?

• Has the ice maker just been installed? Is the freezer
temperature cold enough to produce ice? Wait 24 hours
after ice maker hookup for ice production to begin. Allow
3 days after ice production begins to completely fill ice

container.

Does the ice maker mold have water in it or has no ice

been produced? Make sure your refrigerator has been
connected to a water supply and the supply shutoff valve is

turned on.

• Has a large amount of ice just been removed? Allow
24 hours for ice maker to produce more ice.

• Is there a water filter installed on the refrigerator? The
filter may be clogged or installed incorrectly.

• Is an ice cube jammed in the ice maker ejector arm?
For models with an interior ice bin, remove the ice from the
ejector arm with a plastic utensil.

• Is a reverse osmosis water filtration system connected to
your cold water supply? See "Water Supply Requirements"

in the Installation Instructions.

The ice cubes are hollow or small

This is an indication of low water pressure.

Check the following:

• Is the water shutoff valve fully open?

• Are there kinks in the water lines that could restrict water
flow?

• If you are using a water filter, remove the filter and operate the
dispenser. If water flow increases, the filter is clogged or
incorrectly installed.

• Is a reverse osmosis water filtration system connected to
your cold water supply? See "Water Supply Requirements"

in the Installation Instructions.

• If you still have questions regarding your water pressure, call
a licensed, qualified plumber.

8

Off-taste, odor or gray color in the ice

The water dispenser will not operate properly

Check the following:

• Are the plumbing connections new, causing discolored or
off-flavored ice?

• Have the ice cubes been stored too long?

• Does the freezer and ice bin need to be cleaned?

• Has food in the freezer or refrigerator been wrapped
properly?

• Does the water contain minerals (such as sulfur)? A filter
may need to be installed to remove the minerals.

• Is there a water filter installed on the refrigerator? Gray or
dark discoloration in ice indicates that the water filtration

system needs additional flushing.

The ice dispenser will not operate properly

Check the following:

• Is the freezer door closed completely?

• Is the ice bin installed correctly?

• Is there ice in the bin?

• Has the ice frozen in the ice bin?

• Is ice stuck in the delivery chute?

• Has the wrong ice been added to the bin? Use only cubes
produced by the current ice maker.

• Has the ice melted around the auger (metal spiral) in the
ice bin? Empty the ice container. Use warm water to melt the
ice if necessary.

Check the following:

• Is the freezer door closed completely?

• Is the water shutoff valve not turned on, incorrectly installed
or clogged?

Is the water line connected at the source?
Is there a kink in the home water source line?

Has the water system not filled? The water system needs
to be filled the first time it is used.

• Is the refrigerator connected to a cold water line with

water pressure of at least 30 psi (207 kPa)? The water

pressure to the home determines the flow from the dispenser.

• is there a water filter installed on the refrigerator? The
filter may be clogged or incorrectly installed.

• Is a reverse osmosis water filtration system connected to
your cold water supply? See "Water Supply Requirements"

in the Installation Instructions.

Water is leaking from the dispenser

Check the following:

• Is the glass not being held under the dispenser long enough?

• Has the water system been flushed since installation or
changing filters?

The dispenser water is not cool enough

NOTE: Water from the dispenser is chilled to only 50°F (10°C).

• Has the refrigerator been newly installed or a large
amount of water recently dispensed? Allow 24 hours for
the refrigerator to cool completely.

• Has water not been recently dispensed? The first glass of
water may not be cool. Discard the first glass of water.

Cut Hazard

Use a sturdy glass when dispensing ice.
Failure to do so can result in cuts.

• Is the ice dispenser stalling while dispensing "crushed"
ice? Change the ice button from "crushed" to "cubed." If

cubed ice dispenses correctly, depress the button for
"crushed" ice and begin dispensing again.

• Has the dispenser lever been held in too long? Ice will stop
dispensing when the arm is held in too long. Wait 3 minutes

for dispenser motor to reset before using again.

ACCESSORIES

To order stainless steel cleaner or replacement filters, call

1-800-688-9900 and ask for the appropriate part number listed
below or contact your authorized MAYTAG ®Appliances dealer.
In Canada, call 1-800-807-6777.

Stainless Steel Cleaner and Polish:
Order Part #4396095

Standard Base Filter Cartridge:
Order Part #4396841 (T2RFWG2 and P2RFWG2)

WATER FILTER CERTIFICATIONS

State of Calilornia

Department of Health Services

Water Treatment Device

Certificate Number

05- 1703

Date Issued: Aped 6. 2005

Date Revised: September 7, 2005

I rademark/Model Designation Reolacement Elements

_Vhlrlpoo] Deluxe 'l 2WG_ P2WG2

Whirlpool Deluxe T2WG2I P2WG21,

K_tchetiAid Deluxe T2WG2 Manufacturer: Whirlpool C'orp

KltchenAid DelUxe T2WG2L

Manufacturer: V'/'hirlp_ I_.'orp(_r an on

Organic Contaminants

Rated Service Capacily: 200 gals Rated Service Flow: 085 gpm

Do nol use wi/h wat_l that is microbiologically lmsafc ol of ul_known qualhy, without adequat_ disinfection bclbre or
after the system

Conditions of Certification:

Trademark/Model Desi

I 16830 of the

Rated Service Capacity: 200 gal ? Seri:iee Fio**: 085 gpm

Do not use with water that is microbiologica0y unsafe or of unknown quality, widlout adequate disinfection before or

allel the system

Stateof Cali:ti_rnia

Department ofPublic Health

Water Treatment Device

Certificate Number

08- 1896

Date Issued: March 24, 2008

.... Replacement Elemetlts

: .....: ::

Condi{i6fiS of Certifieati0n_

State of Calitbrnia

Department of Health Services

Water Treatment Device

Certificate Number

05 - 17(12

Date Issued: April 6, 2005

Date Revised: September 7, 2(8t5

None

Rated Service Capacity: 200 gals Rated Service Flow: 05 gpm

Do not use wi|h watei/hat is microbiologically unsafe or of unknown quality, without adequate disinfection before or
a0cr the system

Conditions of Certification:

State of Calili3rnia

Department of Public Health

Water Treatment Device

Certificate Number

08- 1895

Date Issued: March 24, 2008

Trademark!Model Designation : ; Replacement Elements

F_wo_

P IWG2L

Manufacturer: WhMp_dl Co_p

116830 of the

None_

Do hal use wilh water that is microbJotogicaily unsath or of unknown quality, without adequale disinllzction beff}re or
alter tile system

Conditions of Certification:

10