Maytag MAV-31 User Manual
Maytag Atlantis
USER’S GUIDE
®
Clothes Washer
MAV-31
Congratulations on
your purchase of a Maytag
Atlantis
satisfaction is very important to us.
Read this manual for best results. It contains instructions to acquaint you with proper
operating and maintenance pr
Save time and money.If something should go wr
we suggest consulting the “Before You Call” section. It
is designed to help you solve basic problems before
consulting a servicer.
If you have questions, write us (include your model
and serial numbers and your phone number) or call:
®
clothes washer! Your
ocedures.
Maytag
Attn: CAIR
P.O. Box 2370
Cleveland, TN 37320-2370
1-800-688-9900 USA
1-800-688-2002 CANADA
1-800-688-2080 USA TTY (for deaf, hearing
impair
(Mon.–Fri., 8am–8pm Eastern Time)
Internet: http://www.maytag.com
Appliances Sales Company
®
Center
ed, or speech impair
ed)
ong,
Table of Contents
Safety instructions . . . . . . . . . . . . . . . . . 1
Operating tips . . . . . . . . . . . . . . . . . . . . . 2
Controls at a glance. . . . . . . . . . . . . . . 3-6
Special features . . . . . . . . . . . . . . . . . . 6-7
Care and cleaning . . . . . . . . . . . . . . . . . . 7
Storing the washer . . . . . . . . . . . . . . . . . 8
Before you call . . . . . . . . . . . . . . . . . . . 8-9
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . 10
Form No.
Y81917
Guide de l’utilisateur. . . . . . . . . . . . . . . 12
Guía del usuario . . . . . . . . . . . . . . . . . . 24
2006 Maytag Appliances Sales Co.
A
Part No. 2206685
©
Important Safety Instructions
WARNING:
TToo rreedduuccee tthhee rriisskk ooff ffiirree,,eexxpplloossiioonn,,eelleeccttrriicc sshhoocckk,,pprrooppeerrttyy ddaammaaggee oorr iinnjjuurryy ttoo ppeerr-
ssoonnss wwhheenn uussiinngg tthhee aapppplliiaannccee,,ffoollllooww bbaassiicc ssaaffeettyy pprreeccaauuttiioonnss,,iinncclluuddiinngg tthhee ffoolllloowwiinngg:
1. Read all instructions before using the appliance.
2. As with any equipment using electricity and having
oving parts, there are potential hazards. To use this
m
appliance safely, the operator should become familiar
with the instructions for operation of the appliance and
always exercise care when using it.
3. Do not install or store this appliance where it will be
exposed to the weather.
4. Install and level washer on a floor that can support the
weight.
5. This appliance must be properly grounded. Never plug
the appliance cord into a receptacle which is not
grounded adequately and in accordance with local and
national codes. See installation instructions for grounding this appliance.
6. To avoid the possibility of fire or explosion:
a. Do not wash items that have been previously cleaned
in, washed in, soaked in, or spotted with gasoline,
dry-cleaning solvents, other flammable or explosive
substances as they give off vapors that could ignite or
explode. Hand wash and line dry any items containing these substances.
Any material on which you have used a cleaning solvent, or which is saturated with flammable liquids or
solids, should not be placed in the washer until all
traces of these liquids or solids and their fumes have
been removed.
These items include acetone, denatured alcohol,
gasoline, kerosene, some liquid household cleaners,
some spot removers, turpentine, waxes and wax
removers.
b. Do not add gasoline, dry-cleaning solvents, or other
flammable or explosive substances to the wash water
These substances give off vapors that could ignite or
explode.
c. Under certain conditions, hydrogen gas may be pro-
duced in a hot water system that has not been used
for 2 weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water system has not been used for
such a period, befor
combination washer-dryer, turn on all hot water
faucets and let the water flow from each for several
minutes. This will release any accumulated hydrogen
As the gas is flammable, do not smoke or use an
gas.
open flame during this time.
7. Do not reach into the appliance if the tub or agitator is
moving.
8. Do not allow children or pets to play on, in, or in front
of the appliance. Close supervision is necessary when
the appliance is used near children and pets.
Do not tamper with contr
9.
10. Do not repair or replace any part of the appliance or
attempt any servicing unless specifically recommended
e using a washing machine or
ols.
:
in published user-repair instructions that you understand and have the skills to carry out.
1. Unplug power supply cord before attempting to service
1
your washer.
12. The agitator should not be removed. If the agitator is
removed, it must be replaced by pushing down completely and the locking screw tightened before the washer is operated.
13. Store laundry aids and other material in a cool, dry
place where children cannot reach them.
14. Do not wash or dry items that are soiled with vegetable
or cooking oil. These items may contain some oil after
laundering. Due to the remaining oil, the fabric may
smoke or catch fire by itself.
15. Do not use chlorine bleach and ammonia or acids (such
as vinegar or rust remover) in the same wash.
Hazardous fumes can form.
16. Do not machine wash fiberglass materials. Small particles can stick to fabrics washed in following loads and
cause skin irritation.
17. Before the appliance is removed from service or discarded, remove the door to the washing compartment.
18. Inlet hoses are subject to damage and deterioration over
time. Check the hoses periodically for bulges, kinks,
cuts, wear or leaks and replace them every five years.
What you need to know about
safety instructions
Warning and Important Safety Instructions appearing in this
manual are not meant to cover all possible conditions and situations that may occur. Common sense, caution, and care
.
must be exercised when installing, maintaining or operating
appliance.
Always contact your dealer, distributor, service agent, or
manufactur
understand.
er about problems or conditions you do not
Recognize safety symbols,
words, labels
WARNING
WARNING – Hazards or unsafe practices which COULD
esult in severe personal injury or death.
r
CAUTION
CAUTION – Hazards or unsafe practices which COULD
result in minor personal injury.
-
1
SAVE THESE INSTRUCTIONS
Operating Tips
Detergent
• Use either liquid or granular laundry detergent. For
best results, be sure detergent is added to the washer BEFORE the load and be sure the wash water is
above 65°F.
• Use the correct amount of detergent for the load size,
soil level and water conditions. Use more detergent if
you have hard water and very soiled loads.
If you have soft water or a lightly soiled load, use less
detergent. (See manufacturer’s instructions.)
• Wipe up any detergent spills on the washer.
Loading
• Put dry, unfolded clothes loosely in the tub, up to the
ow of holes for a maximum load.
top r
• Do not wrap lar
tor.
• Mix large and small items for best circulation. Wash
bulky items like blankets separately
• When laundering wrinkle free items or items of delicate construction, washable woolens or loosely knit
items, never use less than the
setting. This will minimize shrinkage, wrinkling and
pulling of seams.
• For best results, add the detergent to washtub before
adding the load.
• Close lid carefully to avoid slamming.
ge items like sheets around the agita-
.
MEDIUM water level
Additional Tips
• The washer will pause briefly throughout each cycle.
These pauses ar
• This washer is designed so that it will not agitate or
spin when the lid is open. It will fill with the lid open
so water is available for pretreating stains or diluting
fabric softener
e normal.
.
• If you open the lid during a spin cycle, the washer
will stop. When the lid is closed and the contr
pulled out, the washer will continue the cycle at the
point it was interrupted.
ol dial
2
Controls at a Glance
Step 1
Select Water Level
Determine the selected setting based on clothes load size.
It may become necessary, due to bulky fabrics, to adjust
the water level after agitation begins. To adjust the
water level, turn the control to
the desired setting.
RESET and then back to
RREEMMEEMMBBEERR::IItteemmss mmuusstt cciirrccuullaattee ffrreeeellyy ffoorr bbeesstt rreessuullttss.
WATER LEVEL SETTING LOAD SIZE
Super
Large
Medium
Mini
3/4 – Full
1/2 – 3/4 Full
1/3 – 1/2 Full
1/4 Full
.
Step 2
Select Wash/Rinse Temperature
Your washer provides you with a choice of hot, warm
or cold water for washing and cold or warm water for
rinsing. Use the chart below as a guide.
WASH/RINSE TEMPS LOAD TYPE
Hot
Cold
W
arm
Warm
Warm
Cold
Cold
Cold
RREEMMEEMMBBEERR::IInn wwaasshh wwaatteerr tteemmppeerraattuurreess bbeellooww 6655°°FF,,ddeetteerrggeennttss ddoo nnoott ddiissssoollvvee wweellll oorr cclleeaann wweellll..CCaarree llaabbeellss ddeeffiinne
ccoolldd wwaatteerr aass uupp ttoo 8855°°FF.
White and heavily soiled,
color-fast items
Moderately soiled,
ed items
color
Moderately soiled, color
items; most wrinkle-free items
Brightly colored, lightly soiled
items; washable woolens
.
3
ed
-
e
Step 3
Select Wash/Spin Speed
Your washer has selectable wash and spin speed combinations.
WASH/SPIN SPEEDS LOAD TYPE
Regular/Whites
Normal/Fast
Perm. Press
Normal/Slow
Delicate
Gentle/Slow
Handwash
Ex. Gentle/Slow
(select models)
Sturdy fabrics needing
maximum water extraction
like jeans, towels, bedding.
Sturdy fabrics needing a
slower spin speed to reduce
wrinkling such as dress shirts,
dress pants.
Delicate fabrics needing
slower spin speed because
of clothing construction.
Intermittent slow agitation
and soak to gently wash the
most delicate items.
Step 4 (if desired)
Select Options
Extra Rinse (select models):
When the switch is in the “On” position, an extra rinse
is added to the end of the cycle to more completely
remove laundry additives, suds, perfumes, etc.
Finger Faucet (select models):
Provides a flow of water when the switch is in the “On”
position.
• If the selected water level is reached, the finger
• For your safety, the finger faucet will not operate if
faucet will not operate.
hot wash is selected.
4
Controls at a Glance (continued)
Step 5
Select a Cycle
Press the control dial in and turn in either direction to
the desired cycle. Pull the dial out to start the washer.
Note: All wash times are approximate.
Soak Only (select models):
Provides 3 minutes of agitation and
then soak.
– soak for 30 minutes or less.
control dial must be manually
advanced to a spin setting to spin
and drain the water.
Avoid extended soaking
The
Regular Cycle
Regular Cycle is designed to clean underwear, Tshirts and other cotton sturdy items like towels,
sheets, jeans, etc.
PREWASH (select models): 33 minutes of wash
time.
EXTRA HEAVY: 27 minutes of
wash time.
HEAVY: 21 minutes of wash time.
NORMAL: 15 minutes of wash
time.
LIGHT: 9 minutes of wash time.
The Light Cycle is appropriate for
most loads.
Permanent Press Cycle
Permanent Pr
dress pants, business casual and poly/cotton to reduce
wrinkling.
PREW
HEAVY: 21 minutes of wash time.
ASH
ess cycle is designed to clean dress shirts,
(select models):
27 minutes of wash time.
Quick Wash (select models):
This cycle is intended to refresh clothing. Quick Wash should only be used
for small loads with little or no soil
and a minimal water level. Use no
more than a teaspoon of detergent.
CChhaannggeess iinn wwaasshh ssppeeeedd aarree nnoorrmmaall..OOccccaassiioonnaall ppaauusseess uup
ttoo 33 mmiinnuutteess iinn lleennggtthh aarree nnoorrmmaall.
Delicate or Permanent Press fabrics may be washed
using the following settings:
NORMAL: 15 minutes of wash time. (This is the recommended setting for most loads.)
LIGHT: 9 minutes of wash time.
HANDW
EXTRA
time.
ASH (select models):
LIGHT (select models):
.
6 minutes of wash time.
6 minutes of wash
p
5
Step 6
Pull Control Dial Out to Start
• Add detergent and any additives.
• Add load and close lid.
• Pull out control knob to start.
You may stop the washer at any time by simply push-
ing the control dial IN. Therefore it is possible to obtain
a non-agitated soak or to shorten, skip or repeat any
part of a cycle. The control dial must be pushed IN (off
position) when you change the setting.
Special Features
Liquid Chlorine
Bleach Dispenser
The dispenser automatically dilutes liquid chlorine
bleach before it reaches your wash load. To use, follow
these steps:
1. Measure liquid chlorine bleach carefully, following
the instructions on the bottle.
Add the bleach to the dispenser befor
2.
load. Avoid splashing or over-filling the dispenser.
e adding the
:
NNOOTTEE:
• Never pour undiluted liquid chlorine bleach directly
onto the load or into the wash tub. It is a powerful
chemical and can cause fabric damage, such as tearing or color loss, if not used properly.
• If you prefer to use color-safe, non-chlorine bleach,
pour it into the wash tub with your detergent. Do not
pour non-chlorine, color
bleach dispenser.
-safe bleaches into the
Pour liquid chlorine bleach into
bleach dispenser.
6
Special Features (continued)
Fabric Softener Dispenser
This dispenser automatically releases liquid fabric softener at the proper time during the cycle. To use, follow
these steps:
1. Pour liquid fabric softener into the dispenser using
the amount recommended on the package.
2. For proper dispensing of fabric softener in the washer, add warm water to the fabric softener in the dispenser until the level reaches the fill line. Wipe up
spills.
• Do not stop the washer during the first spin. This
will cause the dispenser to empty too soon.
• Never pour fabric softener directly on the load. It
will leave spots and stains.
• Use the dispenser for liquid fabric softeners only.
Care & Cleaning
Pour fabric softener into
softener dispenser.
Turn off the water faucets after finishing the day’s
washing.
washer and prevent the unlikely possibility of damage
from escaping water.
Use a soft cloth to wipe up all detergent, bleach or other
spills as they occur
Clean the following as recommended:
Control Panel – clean with a soft, damp cloth and glass
cleaner
pads.
Cabinet – clean with soap and water
Fabric Softener Dispenser
1.
2. Soak for one hour in sink or container in hot
3. Hold hands over top and bottom of dispenser and
4. Rinse with clean, hot water.
5. Repeat process if necessary.
6.
This will shut off the water supply to the
.
. Do not use abrasive powders or cleaning
.
Pull the dispenser of
water and dishwashing liquid.
shake to loosen buildup.
Replace dispenser on agitator.
f of the top of the agitator
.
Interior – hard water deposits may be removed, if
needed, using a recommended cleaner labeled
washer safe.
The interior of the washer should be cleaned periodically to r
may remain in the washer as a result of washing
clothes. We recommend taking the following steps
every 60 to 120 days to clean and freshen your washer
interior. The frequency with which the washer should
be cleaned and fr
usage, the amount of dirt, soil or bacteria being run
through your washer, or the use of cold water.
To clean and freshen the washer interior:
1. Add a measured amount of chlorine bleach to the
2.
3. Run the washer through a complete cycle using
4. Repeat the process if necessary.
emove dirt, soil, odor or bacteria r
eshened depends on factors such as
bleach dispenser, following package directions
for a normal load.
Add 1/4 cup of deter
hot water and the Super water level setting.
gent to the tub.
esidue that
Do not use dishwashing liquid
inside the washer. Oversudsing can
occur.
7
Storing the Washer
Washers can be damaged if water is not removed from
hoses and internal components before storage. Prepare
the washer for storage as follows:
• Select NORMAL on the REGULAR cycle and add
one cup of bleach OR white vinegar to a full load of
water without clothes. (Do not mix bleach and vinegar in the same wash. Hazardous fumes can form.)
Run the washer through a complete cycle.
• Disconnect the washer from the electrical supply and
leave the washer lid open to let air circulate inside
the tub.
• If the washer has been stored in below-freezing temperatures, allow time for the washer to thaw out
prior to use.
• After storage, select NORMAL on the REGULAR
cycle and run the washer through a complete cycle.
• Turn the water faucets off and disconnect the inlet
hoses.
Before You Call
Won’t Fill
• Plug cord into live electrical outlet.
• Check fuse or reset circuit breaker.
• Turn the control dial to proper cycle and pull dial out to start the washer.
• Turn both faucets on fully.
• Straighten inlet hoses.
• Disconnect hoses and clean screens. Hose filter screens may be plugged at the faucet.
• The drain hose must be elevated at least to the top of the tub.
Won’t Agitate
• Make sure the lid is completely closed.
• Turn the control knob to proper cycle and pull dial out to start the washer.
• Close lid and pull dial out to start the washer. For your safety, washer will not agitate or spin unless the lid is closed.
• The washer is equipped with a lid switch failure detector. If the lid switch should malfunction, the detector will stop
operations for your safety. Call for service.
• Pauses are normal. Wait and see if the washer will start again.
Won’t Spin or Drain
• Straighten drain hoses. Eliminate kinked hoses. If there is a drain restriction, call for service.
Close lid and pull dial out to start the washer
•
• The washer is equipped with a lid switch failure detector. If the lid switch should malfunction, the detector will stop
operations for your safety. Call for service.
• If the drain height is over eight feet, water may not be completely removed.
Load is W
• The washer is designed to reduce spin speed if an unbalanced load is detected. This is normal.
• Redistribute the load in the tub and set the washer on SPIN.
• Spin speed may be too slow for load type. Set Wash/Spin speed to Regular/Whites (normal/fast).
Stops
• Turn the control dial to proper cycle and pull dial out to start the washer.
• Close lid and pull dial out to start the washer. For your safety, washer will not agitate or spin unless lid is closed.
• This may be a pause or soak period in the cycle. Wait briefly and it may start.
• The washer is equipped with a lid switch failure detector. If the lid switch should malfunction, the detector will stop
etter than Normal at the End of the Cycle
fill operations for your safety. Call for service.
. For your safety, washer will not agitate or spin unless the lid is closed.
Cont.
8
Before You Call (continued)
eaks Water
L
Make sure water inlet hose connections are tight at faucet and water valve.
•
Make sure end of drain hose is correctly inserted and secured to drain facility.
•
• Avoid extended soaking – soak for 30 minutes or less.
• Avoid overloading.
Is Noisy
• Be sure washer is leveled properly as outlined in installation manual.
• Weak floors can cause vibration and walking.
• Be sure rubber feet are installed on leveling legs.
• Operating sounds will vary depending on agitation speed.
Fills with the Wrong Temperature Water
• Turn both faucets on fully.
Make sure temperature selection is correct.
•
• Make sure hoses are connected to correct faucets and inlet connections. Be sure water supply is regulated correctly.
Flush water line before filling washer.
• Check the water heater. It should be set to deliver a minimum 120° F (49° C) hot water at the tap. Also check water
heater capacity and recovery rate.
• Disconnect hoses and clean screens. Hose filter screens may be plugged.
Cycle Selector Advances Through “Off”
• Extra rinse is selected.
For further assistance contact Maytag Appliances Sales Company, Maytag Customer Assistance:
U.S. 1-800-688-9900 or Canada 1-800-688-2002
U.S. customers using TTY for deaf, hearing impaired or speech impaired, call 1-800-688-2080.
NNOOTTEE:: IInn oouurr ccoonnttiinnuuiinngg eeffffoorrtt ttoo iimmpprroovvee tthhee qquuaalliittyy ooff oouurr aapppplliiaanncceess,, iitt mmaayy bbee nneecceessssaarryy ttoo mmaakkee cchhaannggeess ttoo
tthhee aapppplliiaannccee wwiitthhoouutt rreevviissiinngg tthhiiss gguuiiddee..
9
Warranty & Service
Warranty
Limited One Year Warranty Parts and Labor
For one (1) year from the original retail
purchase date, any part which fails in
normal home use will be repaired or
replaced free of charge.
Canadian Residents
The above warranties only cover an appliance installed in Canada that has been
certified or listed by appropriate test agencies for a compliance to a National
Standard of Canada unless the appliance
was brought into Canada due to transfer
of residence from the United States to
Canada.
The specific warranties expressed above are
ONLY warranties provided by the
the
manufacturer. These warranties give you
specific legal rights, and you may also have
other rights which vary from state to state.
CUSTOMER’S SOLE AND EXCLUSIVE
REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS
PROVIDED HEREIN. IMPLIED WARRANTIES, INCLUDING WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, ARE LIMITED TO
ONE YEAR OR THE SHORTEST
PERIOD ALLOWED BY LAW. MAYTAG
CORPORATION SHALL NOT BE LIABLE
FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES. SOME STATES AND
PROVINCES DO NOT ALLOW THE EXCLU-
ION OR LIMITATION OF INCIDENTAL OR
S
EQUENTIAL DAMAGES, OR LIMITA-
S
N
O
C
TIONS ON THE DURATION OF IMPLIED
WARRANTIES OF MERCHANTABILITY OR
SS, SO THESE EXCLUSIONS OR
E
ITN
F
LIMITATIONS MAY NOT APPLY TO YOU.
THIS WARRANTY GIVES YOU SPECIFIC
AL RIGHTS AND YOU MAY ALSO
LEG
HAVE OTHER RIGHTS, WHICH VARY STATE
TO STATE OR PROVINCE TO PROVINCE.
What is Not Covered By These Warranties
1. Conditions and damages resulting from any of the following:
. Improper installation, delivery, or maintenance.
a
. Any repair, modification, alteration, or adjustment not authorized by the
b
manufacturer or an authorized servicer.
c. Misuse, abuse, accidents, unreasonable use, or acts of God.
d. Incorrect electric current, voltage, electrical and/or gas supply.
e. Improper setting of any control.
2. Warranties are void if the original serial numbers have been removed, altered,
or cannot be readily determined.
3. Light bulbs, water filters and air filters.
4. Products purchased for commercial or industrial use.
5. The cost of service or service call to:
a. Correct installation errors. For products requiring ventilation, rigid metal
ducting must be used.
b. Instruct the user on the proper use of the product.
Transport the appliance to and from the servicer.
c.
6. Any food loss due to refrigerator or freezer product failures.
7. Expenses for travel and transportation for product service in remote locations.
8. Outside of the United States and Canada this warranty does not apply.
Contact your dealer to determine if another warranty applies.
9. Consequential or incidental damages sustained by any person as a result of
any breach of these warranties. Some states do not allow the exclusion or
limitation of consequential or incidental damages, so the above exclusion may
not apply.
If You Need Service
First see the Troubleshooting section in your Use and Care Guide or call the dealer from whom your appliance was purchased or call Maytag Services, LLC,
Customer Assistance at 1-800-688-9900 USA and 1-800-688-2002 Canada to
locate an authorized servicer.
• Be sure to retain proof of purchase to verify warranty status. Refer to WARRANTY
for further information on owner’s responsibilities for warranty service.
• If the dealer or service company cannot resolve the problem, write to Maytag
Services, LLC, Attn: CAIR
1-800-688-9900 USA and 1-800-688-2002 Canada. U.S. customers using
TTY for deaf, hearing impaired or speech impaired, call 1-800-688-2080.
• User’s guides, service manuals and parts information are available from Maytag
Services, LLC, Customer Assistance.
®
Center, P.O. Box 2370, Cleveland, TN 37320-2370, or call
Notes: When writing or calling about a service problem, please include:
a. Your name, address and telephone number;
b. Model number and serial number;
c. Name and address of your dealer or servicer;
d. A clear description of the problem you are having;
e. Proof of purchase (sales receipt).
10
Loading...