Maytag MAH3000AWA, MAH3000AWW Dimension Guide

www.dexpress.com DIMENSION EXPRESS Fax on Demand [phone]

This Data Sheet Includes Information On

Maytag

• Product Model Number (s): •

MAH3000AWA and MAH3000AWW

• Dimensions (Actual Size) •

Height including control panel:

Height NOT including control panel:

Minimum distance from working surface to

Maximum depth of cabinet directly above:

Minimum clearance from back wall:

Minimum distance to door in front:

Minimum clearance right and left:

Washers:

Width:

Depth:

Depth with door open:

cabinets directly above:

Door width:

27"
43 1/4"
36 1/4"
28 1/2"
50 3/4"

17"
14"
1"
0"
0"
22"

Side View

(not to scale)

14" max.

Closet door

1"

• Additional Information •

• Electrical requirements: 120V, 60Hz, 15 ampere
grounded, fused electrical supply is required. An
individual branch (or separate circuit serving only this
appliance is recommended). Washer is equipped with 3
prong power cord.

• Maximum amperage draw is 7 amps.

• Minimum wire size of 14 gauge (No. 12 preferred),
copper wire only.

• When installed next to Maytag Dryer, the overall
width is 54".

• Water supply: 20 to 120 psi water pressure. 140°F hot
water supply recommended. 4 1/2 foot length HOT and
COLD fill hoses provided. Access for manual shut-off
water faucets recommended. Suggested water line
size is 3/8" or 1/2" O.D.

• Drain: Standpipe of 36" in height is recommended (48"
maximum).Drain system must except 1" O.D. drain
hose. Washer will discharge water at a rate of about
4gals/min. 4 foot long drain hose supplied.

• Use of built in laundry wall box can simplify
installation.

• Flooring requirements: Well braced solid floor (washer
with load and water weighs approx. 300 lbs.
Installation on carpeting or soft tile requires kit 204986.

• MAH3000AWA: Monochromatic Almond.

• MAH3000AWW: Monochromatic White.

36 1/4"

at 0"

Leg Adj.

0" wall clearance
on both sides

17"

28 1/2"

22"

27"

Front View

(not to scale)

43 1/4"

at 0"

Leg Adj.

Subject to change without notice. This system is designed to
be updated daily if necessary. Dimension Express is not
responsible for use of superseded, voided, or outdated data
sheets. Because of the difficulty or impracticability of deter­mining actual damages, liability of Dimension Express shall
not exceed $50.00.
Copyright © Dimension Express, 2000.

• NEVER reuse Data Sheets. Data Sheets are subject to change without • Call Dimension Express if you have any questions at [phone] •
notice. Dimension Express is a FREE service bureau and is updated daily, • Always refer to a current Code at a Glance or manufacturer directory •
it makes far more sense to spend the time necessary to request new Data • Data Sheet codes change on the first of odd numbered months at 12:01am •
Sheets for each project, as opposed to the problems, time, costs, and risks
associated with reusing old Data Sheets.

337

BN • A337 • 30626 • 010903 • 18332 • 41598