Maytag LAT8026AAE, LAT8026AAM Dimension Guide

www.dexpress.com DIMENSION EXPRESS Fax on Demand [phone]

This Data Sheet Includes Information On

Rear recess:

Maytag

• Product Model Number (s): •

Washers:

LAT8026AAE and LAT8026AAM

Side View

(not to scale)

• Dimensions (Actual Size) •

Height:

Depth :

Width:

Height from floor to top of open door:

Height from floor to top of working surface: 36" 36"

• Additional Information •

• Electrical requirements: 120V, 60Hz, 15 ampere

grounded, fused electrical supply is required. An
individual branch (or separate circuit serving only this
appliance is recommended). Equipped with 3 prong
power cord.

• Maximum amperage draw is 6 amps (except for motor

starting surges).

• Minimum wire size of 14 gauge (No. 12 preferred),

copper wire only.

• When installed next to Maytag Dryer, the overall

width is 54".

• Flush to wall installation possible.

• Water supply: 30 to 120 psi water pressure. 140°F hot

water supply recommended. 5 foot length HOT and
COLD fill hoses provided. Access for manual shut-off
water faucets recommended. Suggested water line
size is 3/8" or 1/2" O.D.

• Drain: Standpipe of 36" in height is recommended (48"

maximum).Drain system must except 1 1/2" O.D. drain
hose. Washer will discharge water at a rate of about 20
gals/min. 4 foot long drain hose supplied.

• Use of built in laundry wall box can simplify

installation.

• Flooring requirements: Well braced solid floor (washer

with load and water weighs approx. 450 lbs.
Installation on carpeting or soft tile requires kit 204986.

43 5/8"
26 3/4"
25 1/2"
52"

1 1/4"

52"

1 1/4"

43 5/8"

26 3/4"

Top View

(not to scale)

26 3/4"

25 1/2"

• LAT8026AAE: Monochromatic White.

• LAT8026AAM: Monochromatic Almond.

Rear view

(looking into

Drain

25 1/2"

Water

intakes

room when

installed)
Plumbing

locations on

3 3/4"

11 7/16"

3 3/4"

back of unit

Subject to change without notice. This system is designed to
be updated daily if necessary. Dimension Express is not
responsible for use of superseded, voided, or outdated data
sheets. Because of the difficulty or impracticability of deter­mining actual damages, liability of Dimension Express shall
not exceed $50.00.
Copyright © Dimension Express, 2000.

• NEVER reuse Data Sheets. Data Sheets are subject to change without • Call Dimension Express if you have any questions at [phone] •
notice. Dimension Express is a FREE service bureau and is updated daily, • Always refer to a current Code at a Glance or manufacturer directory •
it makes far more sense to spend the time necessary to request new Data • Data Sheet codes change on the first of odd numbered months at 12:01am •
Sheets for each project, as opposed to the problems, time, costs, and risks
associated with reusing old Data Sheets.

391

(not to scale)

BN102 • A391 • 30626 • 000107 • 01816 • 97301

29 1/8"

Dimensions may vary
slightly depending on

leveling legs.