Maytag CWG3100AAS Dimension Guide

www.dexpress.com DIMENSION EXPRESS Fax on Demand (775) 833-3600
This Data Sheet Includes Information On
Maytag
• Product Model Number (s): •
24" Single Gas Wall Oven with Broiler:
CWG3100AAB and CWG3100AAE
24"
22"
24"
• Dimensions (Actual Size) •
Minimum cabinet width:
Cutout width:
Cutout height:
Minimum cutout location from floor :
Minimum cabinet depth:
24" 22" 38" 14" 24"
Distance from face of cabinet to
outer edge of open doors(door swing):
20 3/8"
Distance from face of cabinet to
front of closed door handle:
Overall unit width:
Overall unit height:
Penetration into cabinet:
1 5/8" 23 7/8" 39 1/4" 22 5/8"
Distance from opening floor to centerline of
gas and electrical: 2"
Distance (left) from opening centerline to
centerline of gas:
4"
Distance (right) from opening centerline
to centerline of electrical: 5"
Oven overlap distances when using
cutout dimensions listed above:
Top overlap:
Bottom overlap:
Right side overlap:
1 1/4" 0" 15/16"
Left side overlap: 15/16"
• Additional Information •
• Fits in standard 24" cabinet.
• Secure oven to cabinet through holes provided in trim.
(6 screws shipped with unit)
• Complete floor in oven opening is recommended to
prevent unusual drafts.
• Electrical requirements: 120 volts 60 Hz protected by
a 15 amp fuse or compatible circuit breaker. Minimum wire size is 14 gauge. Copper wire only. Unit is supplied with a 40" long power cord having a 3-prong grounding pug which exits from the cooktop in the middle of the right. A grounded and polarized 3-prong receptacle should be made available. Individual branch circuit serving the cooktop is recommended.
Cabinet Opening
Provide hole in this
area for connecting
to 1/2" dia. pipe fitting
120V grounded
outlet. Outlet
must be flush.
38"
5"
C
4"
L
14"
2"
Overall Dimensions
39 1/4"
See page 2 for additional information
Subject to change without notice. This system is designed to be updated daily if necessary. Dimension Express is not responsible for use of superseded, voided, or outdated data sheets. Because of the difficulty or impracticability of deter­mining actual damages, liability of Dimension Express shall not exceed $50.00. Copyright © Dimension Express, 2002.
• NEVER reuse Data Sheets. Data Sheets are subject to change without • Call Dimension Express if you have any questions at (775) 833-3633 • notice. Dimension Express is a FREE service bureau and is updated daily, • Always refer to a current Code at a Glance or manufacturer directory • it makes far more sense to spend the time necessary to request new Data • Data Sheet codes change on the first of odd numbered months at 12:01am • Sheets for each project, as opposed to the problems, time, costs, and risks associated with reusing old Data Sheets.
169
22 5/8"
23 7/8"
1 5/8"
BN352 • A169B149 • • 032603 • 95653 • 59368
www.dexpress.com
DIMENSION EXPRESS
Fax on Demand (775) 833-3600
Additional Information:
• Cutout in cabinet should be level and straight. There are no
provisions to level the unit after it is installed.
• Construct 5/8" minimum plywood floor flush with bottom of opening.
Floor must be level and straight and capable of supporting 250 lbs.
• For European style cabinets (flush front) the required clearance for
operation of the oven door is a minimum spacing of 7/8" between the cutout and the door, hinge or drawer of the cabinet.
• Gas requirements: Supply line should be 3/4" . Unit is shipped from
factory for use on natural gas. Unit is equipped with built-in conversion for use on LP gas.
- Supplied with 1/2" NPT female inlet on regulator. Regulator supplied
with unit and a shutoff valve must be installed in an accessible location.
- Gas pressure requirements: Natural gas- 5" WC min, 14" WC max. LP
gas- 11" WC min, 14" WC max.
- Air for combustion enters at the extreme bottom front panel. Do NOT
obstruct this opening.
Page 2
This Data Sheet Includes Information On
Maytag
• Product Model Number (s): •
24" Single Gas Wall Oven with Broiler:
CWG3100AAB and CWG3100AAE
• CWG3100AAB : Black.
• CWG3100AAE : Monochromatic White.
1 1/2"
minimum
wide rail
Oven opening floor
Cabinet door or
drawer front
Cabinet door
There must be 1" minimum between bottom of cabinet door and top of oven console.
Oven Control Console
Side View
(not to scale)
1" minimum from oven opening floor to top of cabinet door or drawer front.
Subject to change without notice. This system is designed to be updated daily if necessary. Dimension Express is not responsible for use of superseded, voided, or outdated data sheets. Because of the difficulty or impracticability of determining actual damages, liability of Dimension Express shall not exceed $50.00. Copyright © Dimension Express, 2002.
• NEVER reuse Data Sheets. Data Sheets are subject to change without • Call Dimension Express if you have any questions at (775) 833-3633 • notice. Dimension Express is a FREE service bureau and is updated daily, • Always refer to a current Code at a Glance or manufacturer directory • it makes far more sense to spend the time necessary to request new Data • Data Sheet codes change on the first of odd numbered months at 12:01am • Sheets for each project, as opposed to the problems, time, costs, and risks associated with reusing old Data Sheets.
BN352 • A169B149 • • 032603 • 95653 • 59368
149
Loading...