Maytag CWE7000ACB, CWE7000ACE Dimension Guide

www.dexpress.com DIMENSION EXPRESS Fax on Demand (775) 833-3600

This Data Sheet Includes Information On

Maytag

• Product Model Number (s): •

27" Electric Double Ovens:

CWE7000ACB and CWE7000ACE

• Dimensions (Actual Size) •

Cutout width:

Cutout height:

Minimum cabinet width:

Minimum cabinet depth:

Recommended cutout location from floor :

25" 50 1/2" 27" 24" 13"

Distance from face of cabinet to

outer edge of open doors (Door swing):

21 3/8"

Distance from face of cabinet to

front of closed door handle:

Overall unit width:

Overall unit height:

Penetration into cabinet:

2 9/16" 26 3/4" 51" 22 5/8"

Oven overlap distances when using

cutout dimensions listed above:

Top overlap:

Bottom overlap:

Right side overlap:

1/2" 0" 7/8"

Left side overlap: 7/8"

• Additional Information •

• Cutout in cabinet should be level and straight. There

are no provisions to level the unit after it is installed.

• Construct 5/8" minimum plywood floor flush with

bottom of opening. Floor must be level and straight and capable of supporting 250 lbs.

• A three-wire, single phase, A.C. 120/208-240 volt,

60Hz cycle electrical system protected by a 30 amp fuse or comparable circuit breaker must be provided . 7/8" O.D. flexible cable 4 feet long is furnished by manufacturer. Mount junction box in area under plywood floor if adequate lower cabinet space is available. Locate 1 1/4" conduit access hole in the back right hand side of the plywood floor.

• For European style cabinets (flush front) the required

clearance for operation of the oven door is a minimum spacing of 1" between the cutout and the door, hinge or drawer of the cabinet.

• CWE7000ACB : Black.

• CWE7000ACE : Monochromatic White.

See page 2 for additional information

Cabinet Opening

(not to scale)

Provide for 120/208-240 volt electrical connection in this area.

22 5/8"

27"

25"

24"

50 1/2"

13"

Overall Dimensions

(not to scale)

51"

26 3/4"

2 9/16"

Subject to change without notice. This system is designed to be updated daily if necessary. Dimension Express is not responsible for use of superseded, voided, or outdated data sheets. Because of the difficulty or impracticability of determining actual damages, liability of Dimension Express shall not exceed $50.00. Copyright © Dimension Express, 2000.

• NEVER reuse Data Sheets. Data Sheets are subject to change without • Call Dimension Express if you have any questions at (775) 833-3633 • notice. Dimension Express is a FREE service bureau and is updated daily, • Always refer to a current Code at a Glance or manufacturer directory • it makes far more sense to spend the time necessary to request new Data • Data Sheet codes change on the first of odd numbered months at 12:01am • Sheets for each project, as opposed to the problems, time, costs, and risks associated with reusing old Data Sheets.

213

BN360 • A213B276 • 31469 • 003006 • 11920 • 40679

www.dexpress.com

DIMENSION EXPRESS

Fax on Demand (775) 833-3600

Additional Information:

Cabinet door

Page 2

This Data Sheet Includes Information On

Maytag

• Product Model Number (s): •

27" Electric Double Ovens:

CWE7000ACB and CWE7000ACE

1 1/2"

minimum

wide rail

Oven opening floor

Cabinet door or

drawer front

There must be 1" minimum between bottom of cabinet door and top of oven console.

Oven Control Console

Side View

(not to scale)

1" minimum from oven opening floor to top of cabinet door or drawer front.

BN360 • A213B276 • 31469 • 003006 • 11920 • 40679

276