Maytag CWE4800ACB, CWE4800ACE, CWE4200ACB Dimension Guide

www.dexpress.com DIMENSION EXPRESS Fax on Demand [phone]

This Data Sheet Includes Information On

Maytag

• Product Model Number (s): •

24" Single Wall Ovens:

CWE4800ACB, CWE4800ACE and CWE4200ACB

• Dimensions (Actual Size) •

Cutout width:

Cutout height:

Minimum cabinet width:

Minimum cabinet depth:

Recommended cutout location from floor :

22"
28 11/16"
24"
24"
33 1/4"

Distance from face of cabinet to

outer edge of open door (Door swing):

21 3/8"

Distance from face of cabinet to

front of closed door handle:

Overall unit width:

Overall unit height:

Penetration into cabinet:

2 9/16"
23 7/8"
29 5/8"
22 5/8"

Oven overlap distances when using

cutout dimensions listed above:

Top overlap:

Bottom overlap:

Right side overlap:

13/16"
0"
15/16"

Left side overlap: 15/16"

• Additional Information •

• NOT approved for undercounter installation.

• Cutout in cabinet should be level and straight. There

are no provisions to level the unit after it is installed.

• Construct 5/8" minimum plywood floor flush with

bottom of opening. Floor must be level and straight and
capable of supporting 140 lbs.

• A three-wire, single phase, A.C. 120/208-240 volt,

60Hz cycle electrical system protected by a 30 amp
fuse or comparable circuit breaker must be provided .
7/8" O.D. flexible cable 4 feet long is furnished by
manufacturer. Mount junction box in area under
plywood floor if adequate lower cabinet space is
available. Locate 1 1/4" conduit access hole in the
back right hand side of the plywood floor.

• For European style cabinets (flush front) the required

clearance for operation of the oven door is a minimum
spacing of 1" between the cutout and the door, hinge or
drawer of the cabinet.

• CWE4800ACB and CWE4200ACB : Black.

• CWE4800ACE : Monochromatic White.

Cabinet Opening

(not to scale)

Provide for
120/208-240 volt
electrical
connection in this
area.

22 5/8"

24"

22"

24"

28 11/16"

33 1/4"

Overall Dimensions

(not to scale)

29 5/8"

23 7/8"

See page 2 for additional information

Subject to change without notice. This system is designed to
be updated daily if necessary. Dimension Express is not
responsible for use of superseded, voided, or outdated data
sheets. Because of the difficulty or impracticability of deter­mining actual damages, liability of Dimension Express shall
not exceed $50.00.
Copyright © Dimension Express, 2002.

• NEVER reuse Data Sheets. Data Sheets are subject to change without • Call Dimension Express if you have any questions at [phone] •
notice. Dimension Express is a FREE service bureau and is updated daily, • Always refer to a current Code at a Glance or manufacturer directory •
it makes far more sense to spend the time necessary to request new Data • Data Sheet codes change on the first of odd numbered months at 12:01am •
Sheets for each project, as opposed to the problems, time, costs, and risks
associated with reusing old Data Sheets.

214

2 9/16"

BN356 • A214B276 • • 032603 • 95653 • 76241

www.dexpress.com

DIMENSION EXPRESS

Fax on Demand [phone]

Additional Information:

Cabinet door

Page 2

This Data Sheet Includes Information On

Maytag

• Product Model Number (s): •

24" Single Wall Ovens:

CWE4800ACB, CWE4800ACE and CWE4200ACB

1 1/2"

minimum

wide rail

Oven opening floor

Cabinet door or

drawer front

There must be 1"
minimum between
bottom of cabinet
door and top of
oven console.

Oven Control Console

Side View

(not to scale)

1" minimum from oven
opening floor to top of
cabinet door or drawer
front.

Subject to change without notice. This system is designed to be updated daily if necessary. Dimension Express is not responsible for use of superseded, voided, or
outdated data sheets. Because of the difficulty or impracticability of determining actual damages, liability of Dimension Express shall not exceed $50.00.
Copyright © Dimension Express, 2002.

• NEVER reuse Data Sheets. Data Sheets are subject to change without • Call Dimension Express if you have any questions at [phone] •
notice. Dimension Express is a FREE service bureau and is updated daily, • Always refer to a current Code at a Glance or manufacturer directory •
it makes far more sense to spend the time necessary to request new Data • Data Sheet codes change on the first of odd numbered months at 12:01am •
Sheets for each project, as opposed to the problems, time, costs, and risks
associated with reusing old Data Sheets.

BN356 • A214B276 • • 032603 • 95653 • 76241

276