Maytag CRG8400AAL User Manual

WARNING:If theinformationinthismanualis notfollowedexactly,I

a fire or explosionmayresultcausingpropertydamage,personal

injuryordeath.

- Donotstoreorusegasolineorotherflammablevaporsandliquids
inthevicinityofthisoranyotherappliance.

- WHATTODOIFYOUSMELLGAS

• Donottrytolightanyappliance.

• Donottouchanyelectricalswitch;donotuseanyphoneinyour
building.

• Immediatelycallyourgassupplierfromaneighbor'sphone.

Followthegassupplier'sinstructions.

• Ifyoucannotreachyourgassupplier,callthefiredepartment.

- Installationandservicemustbeperformedbyaqualifiedinstaller,
serviceagencyorthegassupplier.

FOR FUTURE REFERENCE

Should you have any questions about using your
Maytag gas range, call or write us. Be sure to

provide the model number of your range.

WARNING - Check with the installer to

make sure the appliance has been
grounded to avoid possible electrical
shock. Be sure you read the

IMPORTANT SAFETY INSTRUCTIONS

on page 2 before you start to use
this range.

For future reference we suggest you retain this

manual after recording the model number and
serial number of this gas range in the spaces l_k WARNING

provided. This information can be found on the
data plate located on the left side of the frame

around the storage drawer. • ALL RANGES

CAN TIP

ModelNumber -INJURY TO PERSONS

COULD RESULT

• INSTALLANTI-TIP

SerialNumber DEVICES PACKED

WITH RANGE

• SEE INSTALLATION
INSTRUCTIONS

DatePurchased

205346 8114P_93_0

TABLE OF CONTENTS

Page

For Future Reference .......................................................... Inside Front Cover

Important Safety Instructions .................................................................. 2-4

Range Control Panel .................................................................................. 5

Electronic Clock .......................................................................................... 5-6

• Setting the Clock and Timer .............................................................. 6

Surface Cooking .......................................................................................... 6 9

• Sealed Gas Burners ............................................................................. 6-8

• Cookware Considerations ................................................................... 9

Using Your Oven .......................................................................................... 10-17

• Baking .................................................................................................. 11-13

• Roasting ............................................................................................... 14

• Broiling ................................................................................................ 15

• Delay Start Oven Cooking .................................................................. 16-17

Care and Cleaning ...................................................................................... 17-19

• Sealed Gas Burners and Cooktop ...................................................... 17

• Continuous Clean Oven ..................................................................... 18

• Manual Clean Oven ............................................................................ 18

• Range Cleaning Chart ........................................................................ 19-20

Maintenance ................................................................................................. 21-23

• Electrical Connection ......................................................................... 21

• Leveling Legs ...................................................................................... 21

• Light Replacement ............................................................................. 21-22

• Oven Door ........................................................................................... 22

• Proportional Valve Adjustment .......................................................... 22

• Removing Range for Cleaning and Servicing .................................... 23

• Broiler Drawer .................................................................................... 23

Before You Call for Serviee ....................................................................... 24

Consumer Publications .............................................................................. 25

Warranty .............................................................................................. Back Cover

PAGE

IMPORTANT SAFETY INSTRUCTIONS

General In Case of Fire:

No cooking appliance should be used as a space 1. Turn off the range controls.
heater. This 2. Smother the fire or flanle with baking soda,

instruction is F_ ._ I/_6"v ,I thy chemical, or a foam-type extinguisher. Do

based on safety , ' .... not use water on grease fires.

considerations to ' "

prevent p°tentiall_hazardto the Child Safety

consumer as well Do not leave children
as damage to the alone or unsupervised near

appliance, the appliance when it is in

use or is still hot. Children

If the range is installed near a window, proper should never be allowed to
precautions should be taken to prevent the sit or stand on any part of
curtains from blowing over the burners creating the appliance. Children -_-k_

a FIRE HAZARD. must be taught that the

appliance and utensils in it

Keep the area around the appliance clear and ean be hot. Children
free from combustible materials, gasoline, and should be taught that an

other flammable vapors and materials, appliance is not a to3_They
Have the installer show you the location of the should not be allowed to play with controls or

gas shut offvalve and how to shut it offin an other parts of the unit. Let hot utensils cool in a
emergency, safe place, out of reach of small children.

CAUTION: Do not store items of interest to

Your appliance is vented through the base of the children in cabinets above all appliance or on the
backguard. Never bloek tile oven vent or the air baekguard of a range. Children elimbil_g on the

intakes. Do not obstruct the flow of the appliance to reach items could be seriously
combustion and ventilation air. Restriction of tile injured. Do not use an appliance as a step stool

air flow to the burner prevents proper to any cabinets above.
performance.

Avoid touching the oven vent area while oven is Anti-Tip Device

on and for several minutes after the oven is To reduce the risk of tipping of the appliance
turned off. Some parts of the vent and the from unusual usage or by excessive loading of
smTounding area can become hot enough to the oven door, the appliance must be secured by

cause burns, a properly installed anti-tip device. To check if
Do not use the cooktop or the oven as a storage deviee is installed properly, use a flashlight and

area for food or cooking utensils. This instruction look underneath the range to see that one of the

rear leveling legs is engaged in the bracket slot.
is based on safety considerations to prevent a When removing tile appliance for cleaning, be
potential hazard to the user and to the appliance, sure the anti-tip device is engaged when the

Misuse of the range is replaced. The anti-tip device secures the

appliance door, rear leveling leg to the floor, when properly

, such as stepping, engaged.

leaning or sitting

on the door, may Cleaning

result iu possible Tnrn off all the controls and wait for tile range
tipping of the parts to cool before touching or cleaning them.
appliance or Do not touch the burner grates or surrounding

breakage of the door and serious injuries, areas until they have had sufficient time to cool.

PAGE 2

Touching a hot oven light bulb with a damp cloth F,,,, , J spillovers may

could cause the bulb to break. Should the bulb ] _ ignite.

break, disconnect the power to the range before Be sure you know
trying to remove the bulb to avoid electrical which knob

shock. _ _ controls which

Clean the range with caution. If a wet sponge or surfaee burner.
cloth is used to wipe spills on a hot cooking area, Always make sure

be careful to avoid steam bums. Some cleaners the correct burner
can produce noxious fnmes if applied to a hot is turned on and that the burner has ignited.

surface. When cooking is completed, turn the burner off.

Grease Use caution when wearing garments made of

flammable material to

Use extreme caution when moving the grease avoid clothing fires. . __Jj,
kettle or disposing of hot grease. Loose fitting or long
Hot grease is hanging-sleeved

ammabe voa relsho

letting grease deposits worn while cooking. __
collect around the Clothing may ignite or

appliance, range hood, catch utensil handles.
or vent fan. Do not Never heat an unopened container on the

leave a container of
grease around a cooking appliance. Always let surface burner or in tile oven. Pressure build-up

quantities of hot fat used for deep fat frying cool may cause the container to burst resulting in
before attempting to move or handle. In the serions personal injury or damage to the range.

event of a grease fire, DO NOT attempt to move Slide the oven rack out to add or remove food,
the pan. Cover the pan with a lid to extinguish using dry, sturdy pot holders. Ahvays avoid
the flame and turn the surface burner off. Do reaching into the oven to place or remove food.

not douse the flame with water. Use a d.ry Use dr?; sturdy pot holders. Damp pot holders
chemical or foam-type fire extinguisher, if may cause burns from steam. Dish towels or

available, or sprinkle heavily with baking soda. other substitutes should never be used as pot

Spills or boilovers which contain grease should holders because they can trail across the hot

be cleaned up as soon as possible. If they are surface burners and ignite or get caught on

allowed to accumulate, they could create a FIRE range parts.
HAZARD.

Use care when opening the oven door. Let any

Prepared Food Warning hot air or steam escape before removing or

replacing the food. Always plaee the oven racks

Follow the }hod manufacturer's instructions, in the desired positions while the oven is cool If
If a plastic frozen food container and/or its film a rack must be moved while hot, be careful to

cover distorts, warps or is otherwise damaged avoid contact of the pot holders with the oven

during cooking, immediately discard the food burner flanle.
and its container. The food could be

contaminated. Storage Above the Range

Cooking Safety To eliminate the hazard of reaching over hot

surface burners, cabinet storage should not be

Always adjust the surface burner_ flame so that provided directly above a unit. If such storage is

is does not extend beyond the bottom of the provided, it should be limited to items which are
utensil. This instruction is based on safety used infrequently and which are safely stored in

considerations, an area subjected to heat from an appliance.
Never leave a surface cooking operation Temperatures in the storage areas above the unit

unattended especially when using a high heat may"be unsafe for some items, such as volatile
setting. Boilovers can cause smoking and greasy liquids, cleaners or aerosol sprays.

PAGE 3

Utensil Safety flammable. Avoid their use or storage near an

Use only pans that have fiat bottoms and handles appliance.

that are easily grasped and stay cool. Avoid using Self-Clean Oven

unstable, warped, easily tipped or loose handled
pans. Do not use pans if their handles twist and (select models)

cannot be tightened. Pans that are beavy to Do not clean the door gasket. The door gasket is
move when filled with food may also be essential for a good seal. Care should be taken

hazardous, not to rub, damage, or move the gasket. Do not
Always place a pan of food on a surface burner use oven cleaners of any kind in or around any

before turning it on and turn it offbefore part of the self-clean oven. Clean only the parts
removing the pan. listed in this booklet. Before self-cleaning the

Always turn , _ oven, remove the broiler part, oven racks, and

pan handles to _ other utensils, and wipe off excessive spillovers.

the side or back It is normal for the cooktop of the range to
of the _ _"-- become hot during a self-clean cycle. Therefore,

appliance, not __, @ touching or lifting the cooktop during a clean

out into the
room where cycle should be avoided.

they are easily

hit or reached _ Important Safety Notice and
by small Warning

children. To minimize burns, ignition of
flanunable materials and spillage due to The California Safe Drinking Water and Toxic

unintentional contact with the utensil, do not Enforcement Act of 1986 (Proposition 65)
extend handles over the adjacent surface requires the Governor of California to publish a

burners, list of substances known to the State of

California to cause cancer or reproductive hann,
Be sure the utensil is large enough to properly and requires businesses to warn customers of the
contain food and avoid boilovers. The pan size is potential exposures to such substances.

particularly important in deep tat frying. Be sure
the pan will accommodate the volume of food Users of this appliance are hereby warned that

that is to be added as well as the bubble action of the burning of gas can result in low-level
the fat. Never leave a deep fat frying operation exposure to some of the listed substances,

unattended, including benzene, formaldehyde and soot, due
Never let a pan boil d_ as this could damage the primarily to the incomplete combustion of

utensil and the appliance, natural gas or liquid petroleum (LP) fuels.

Properly adjusted burners will minimize

Aluminum Foil incomplete combustion. Exposure to these

substances can also be minimized by properly
Use aluminum foil ONLY as instructed in this venting the burners to the outdoors.

book. Improper use of aluminum foil may"cause

damage to the oven, affect the cooking results, Ventilating Hood

and can also result in shock and/or fire hazards.

To reduce the hazard of storage above a range,

Plastics install a ventilating hood that projects at least

five inches beyond the bottom edge of the
Many plastics are vulnerable to heat. Keep cabinets. Clean the hood frequently to prevent

plastics away from the the parts of the appliance grease from accumulating on the hood or its
that may becmne warm or hot. filter. Should a boilover or spillover result in an

open flame, immediately tuna off the hood's fan

Aerosol Sprays to avoid spreading the flame. After thoroughly

Many aerosol-type spray cans me EXPLOSIVE extinguishing the flame, the f_tnmay be turned
when exposed to heat and may be highly on to remove any unpleasant odor or smoke.

SAVE THESE INSTRUCTIONS

PAGE4

RANGE CONTROL PANEL

styling may differ depending on the model you selected.

ELECTRONIC CLOCK

OVENSET SET

TIMED

BAKE © +

TIMER COOKOVEN

MIN./SEC.TIME STOP

BAKE

BROIL

The electronic clock on your Maytag range is Set Knob
used for the time-of-day clock, timer and delay" Tunl this knob in either direction to enter the

start functions. At the end of an operation, time for all functions.

consecutive beeps wilI sound.

Timer Button

The display on the control will blink when power The tinter can be set from 1 second to 99

is first supplied to the range or if there is a power
failure. Once the time-of-day clock has been set minutes. See page 6 for instructions on setting

the timer.

(see Setting the Clock, page 6), the display will
stop blinking. Cook Time / Oven Stop Buttons

The following buttons and knobs are found on These buttons are used to program the oven to
your Maytag electronic clock: start and stop automatically, either immediately

or at a later time. For detailed information on
using Delay Start, see pages 16-17.

PAGE 5

Setting the Clock and Timer SURFACE COOKING
Clock Sealed Gas Burners

To set tile time-of-clay clock:

1. Press the TIMER and COOK TIME buttons

at the same time and hold down while setting

the clock.

2. Turn the SET knob in either direetion to the

correct time-of-day. Release the TIMER and
COOK TIME buttons.

Timer

To set tile timer: Cooktop

The cool<top on gas ranges with sealed burners is

1. Press the TIMER button once. The designed with two contoured wells which

• triangular indicator will light in the display- contain spills until they can be wiped up. Unlike
above the TIMER button, a range with standard gas burners, this eooktop

2. Turn the SET knob to the desired time. For does not lift-up nor is it removable. To

example, turn the display to 0:05 for five prevent damage to the range, do not attempt to
seconds or to 5:00 for five minutes. The timer lift the cooktop for any reason.

will start automatically. The signal will beep
when the time elapses and continue to beep • _, J

until the TIMER button is pressed.

To cancel the timer: turn the SET knob until

the display reads 0:00.

Square Burner Grates

When reinstalling the

square grates, place

the indented sides

together so the

straight sides are at

the front and rear.

Although tile burner 11

grates are durable,

they will gradually .._, _-. I

lose their shine due

to high temperatures.

PAGE6

Sealed Burners Pilotless Ignition

The four sealed burners of your Ma)_:agrange Be sure all surface controls are set in the OFF
are secured to tile eooktop and are not designed position prior to supplying gas to the range.

to be removed. Your range is equipped with a pilotless ignition
Since tile four burners are sealed into the system which eliminates the need for a constant

cooktop, boilovers or spills won't seep standing pilot light. The spark igniter is located

at the back-side of each burner. When cleaning

underneath the eooktop. Thus, there are no
hidden spills in the burner box area to clean, around the surface burner, use care. If a cleaning

cloth should catch the igniter, it could damage or

Your range features two special Power Burners break it. This will prevent the burner from
located in the left rear and right front positions, lighting.

These offer higher speed cx)okingthat can be
used to quickly bring water to a boil and for __.

large-quantity cooking.

--_ Ignitor

REAR VIEW OF SEALED BURNER

Lighting the Surface Burners

] POWER BURNER To light the surface burners:

1. Plaee a pan on the burner grate.

Aproperly adjusted burner with clean ports will 2. Push in and turn the knob to the START
light within a few seconds. If using natural gas, position. A sparking sound will be heard and

the flame will be blue with a deeper blue inner the burner will light.
core; there should be no trace of yellow in the

flame (this indicates an improper mixture of
air/gas which wastes fuel and should be adjusted

by a serviee technician) With LP gas, some
yellow tips on the flames are acceptable. This is
normal and adjustment is not necessary.

With some types of gas, you may hear a
"popping" sound when the surface burner is

turned off. This is a normal operating sound of
the bnrner.

3. Onee the burner lights, turn the knob to the
desired flame size. The sparking will not stop

until the knob is turned from the START
position.

PAGE7

Selecting the Flame Size

CAUTION: If the flame should go out during

If a knob is turned veiT quickly from ItlGH to a cooking operation mm the burner to the

WARM, the flame may go out, particularly if the OFF position. Ifg&s has accumulated and a

burner is cold. if this occurs, turn the knob to strong gas odor is detected, wait five
the OFF position. Wait several seconds, then minutes for the gas odor to disappear

light the burner again, before relighting the burner.

" Operating During Power Failure

To operate one or more of the surJ_aee burners

_"_'__ during a power failure:

1. Hold a lighted match to the desired surihee
burner l/cad.

2. Turn the control knob to START. The burner
x_dllthen light.

3. Adjust tlm flame to the desired level.

CAUTION: When lighting the suffaoe

The flame should be adjusted so it does not burners, be sure all of the controls are in the I

extend beyond the edge of the cooking utensil. OFF position. Strike the match first and hold it
This improves your cooking efficiency, insures in position before turning the knob to START.

your personal safe_ and prevents damage to any

cabinets above the range,

Uses

Use to quickly hring foods to a boil or
to begin a cooking operation. Reduce

to a lower setting to continue
cooking. Never leave food

unattended when using a HIGH
_lame setting.

Use this setting to continue a cooking
operation. Food will not cook any

faster when a higher flame setting is
used than needed to maintain a

gentle boil.
Use to simmer or keep foods at

serving temperatures. Some cooking
may take place if the utensil is

covered.

{ {

PAGE 8

Cookware Considerations Canning

The cookware material, constrnetion and size Acceptable water-bath or pressure canners
can play a large role in cooking performance, should not be oversized and mnst have a flat

Proper utensils will reduce cooking times, use bottom. The following are not recommended;
less energy and cook food more evenly, canners with ridged bottoms, oversized canners

or a very large canner that rests on two surface

Optimum cooking performance can be
achieved when heavy, gauge, flat, smooth burner grates.

bottom, metal utensils with straight sides When canning, use the High setting just until

and tight fitting lids are used. When selecting the water comes to a boil or pressure is reached
cookware, consider the following things, in the pressure canner, then reduce to the lowest

heat setting that maintains the boil or pressure.

Construction and Size Prolonged use of the High setting or the use of
For best heat conduction from the gas burner to incorrect canning utensils will produce excessive

heat. Excessive heat can cause permanent

the utensil, use flat bottom utensils. To

determine the flatness of the bottom of a pan, damage to the range.
place the edge of a ruler across the bottom of the For more information on canning procedures,
utensil. Hold it up to the light. Little or no light contact your local county" extension offioe or one

should be visible under the ruler, of the following companies who specialize in

home eattning:

The flame size should be adjusted so it does not
extend beyond the edge of the cooking utensil. • Ball Corporation

Consumer Affairs Department

This is for personal safe_ and to prevent damage 345 South High St.

to the range and any cabinets insealled above it. Muneie, IN 47305-2326
Material • Kerr Glass Manufacturing Corporation

Consumer Products Division

The pan material determines how evenly and 1840 Century Park East

quickly heat is transferred ffoin the gas burner Los Angeles, CA 90067
to the pan bottom. Some widely used pan

materials are:

Excellent heat conductor. Some food will cause it to darken or pit. Anodizing improves stain

/

resistance. Often used as a bottom coating to improve the heating of other pan nmterials.

] Excellent beat conductor. Discolors easily, requires constant polishing. Often used as a bottom

coating to improve the heating of other pan materials,
Slow heat conductor. Develops hot spots and produces uneven cooking results. Durable, attractive,

easy to clean and stain resistant. Will distribute heat better if other metals (aluminum or copper) are
combined or sandwiched together as a bottom coating.

Skiw heat conductor. Cooks evenly once temperature is reached. Hea_. Needs seasoning to make
cleaning easier a_ld to prevent sticking and rusting.

Slow heat conductors, Easy to clean. Some types may only be used in the oven.

Classqike substance fused to metal Heating characteristics depend on base material (usually
_fluminum, stainless steel, carbon steel or cast iron). Available in colors and easy to clean.

Note: Some brands of metal, smooth bottom eookware that generally perform well on all types of ranges are Farberware,

Magnalite, Revere Ware, Wearever, T-Fal, and smooth bottom Chlb Aluminum °.
°Brand names are the trademarks of respective manufacturers.

PAGE9

USING YOUR OVEN

Pilotless Ignition Oven Racks

With this type of ignition system, the oven will The two oven racks are designed with a lock-stop

not operate during a power failure or if the edge to keep the racks from coming completely

oven is dlseonneeted from the wall outlet, out of the oven when there is food placed on

No attempt should be made to operate the oven them.

during a power f:ailure. To remove: Be sure the rack is cool, Pull the

Every oven has its own characteristics. Yon may rack straight out until it stops. Tilt the front end

find that the cooking times and temperatures of the rack up and continue pulling the rack out
you were accustomed to with your previous

range may need to be altered slightly with the of the oven.

new range. Compare your recipes with the To replace: Tilt the front end of the rack up
baking chart on page 12 or refer to a re/iable and place the rack between the rack supports.
cookbook for proper recommendations. It is Slide it back until it dears the lock-stop position.

normal to notice some differences between this Lower the front and slide the rack straight in.

appliance and your old one. Pull the rack out to the lock-stop position to be

sure it is positioned correctly and then return it

Setting the Controls to its normal position.

The OVEN TEMP knob is used to select and

maintain the oven temperature. Always tuna this Rack Positions

knob just to the desired temperature not to a It is important that air can circulate freely within
higher temperature and then back. This provides the oven and around the food. To help insure

more accurate oven temperatures. Tuna this this, place food in the center of the oven rack.

knob fully counterclockwise whenever the oven
is not in use. The OVEN SET switch on the back Allow two inches between the edge of the

panel determines the type of oven operation, utensil(s) and the oven walls. If cooking on two

racks, stagger the food to insure proper airflow.

To set your oven for baking or roasting:

Do not attempt to change the rack positions

1. When cool, position the racks in the oven when the oven is hot. Use the following
according to what you are baking, guidelines when selecting the proper rack

2. Turn the OVEN TEMP knob to the desired position:
oven temperature.

3. Depress the OVEN SET switch to the Usedforroasting largecutsof meatand
Bake/Broil position, Allow 10-15 minutes for largepoultry,frozenpies,souffles,angel

preheating, foodcake,orloavesofbread.

4. Place the food in the center of the oven, Used forroastingsmallcutsof meat,

large casseroles, baking loaves of bread,

allowing a minimum of two inches between cakes (in eithertube, bundt, or layer
the utensil(s) and the oven walls, pans) or two-rack baking.

5. Cheek the food for doneness at the minimum Usedfor mostbakedgoods on acookie
time given in the recipe. Cook longer if sheetor jelly rollpan,or frozen

necessary. Turn the OVEN TEMP knob to conveniencefoods.
Off. Remove food from oven. Usedformost broiling andtwo-rack

baking.

Oven Vent Usedforsomebroiling.
The oven vent is located below the back panel.

When the oven is in use, this area may feel warm

or hot to the touch. To prevent problems, do not Never place pans directly on the oven bottom.
block the vent opening in any way. Do not cover an entire oven rack with aluminum

foil or place foil directly under a utensil. To catch
spillovers, cut apiece of foil a little larger than
the pan and place it on the rack below the

utensil.

PAGE 10

Preheating Panel Light

Preheating is necessary for proper baking results. The panel light is tin'ned on by pushing the
It is not necessary for broiling or roasting. Allow rocker switch marked PANEL LIGHT on the
the oven to heat until the desired oven control panel. It may be turned off by depressing

temperature is reached (approximately 10-15 the other side of the switch.
minutes).

Selecting a temperature higher than the desired Ba king

temperature will not preheat the oven any faster.

In i:aet, this may"have a negative effect on baking General Baking Tips

results. Baking results will generally be best when you

use tested recipes from reliable cookbooks.

Oven Bottom Follow the directions to the letter. Be sure to use

To protect the oven bottom against spillovers, fresh ingredients, measure earefully, mix as

use the correct cooking utensil to prevent instructed and use the recommended pan size.
boilovers. The oven bottom can be removed for Be sure to preheat the oven if the recipe calls for

cleaning, this (usually done for breads, cookies and
To remove: When cool, remove the oven racks, biscuits). See the previous section for more
Slide the two catches, Ioeated at each rear corner information on preheating.

of the oven bottom, toward the front of the oven. Most recipes provide minimum and maximum
Lift the rear edge of the oven bottom slightly, baking times such as "bake 35-45 minutes". Do

then slide it back until the front edge of the oven not open the oven door to cheek the progress
bottom clears the oven front frame. Remove the until the minimum time has elapsed. Take care

oven bottom from the oven. not to allow the oven door to slam shut.
To replace: Fit the front edge of the oven

bottom into the front frame. Lower the rear of Utensils
the oven bottom and slide the catches back to The finish on baking utensils determines the

lock the oven bottom into place, amount of browning. Colored, glass or dark,

rough, dull utensils absorb heat, resulting in a

/_ browner, crisper e;'nst. Use this type for pies or

breads. For lighter, more delicate browning, use
shiny or smooth utensils that reflect heat. These

are ideal for cakes and sugar cookies.

' _:¢t ; 2t_ _ When baking in glass rltensils, lower the

recommended temperature by 25°F. (This is not
necessary when baking pies or casseroles.)

The same rule applies when using a colored

-_-. "_3 "_"T porcelain pan.
Always use the pan size recommended in the

recipe. Many pans have the measurements
marked on them. If there are no measurements,

Oven Light measure the inside width and length of the pan.
The oven light automatieally comes on whenever

the oven door is opened. When the door is

closed, push the rocker switch marked OVEN
LIGHT on the control panel to turn it on or off.

PAGE 11

Baking Chart

You may find these guidelines helpful when comparing the baking times, temperatures and oven rack
positions of commonly baked foods.

Product & Type Pan Size Rack Position* Temperature Time**
Cake

Chocolate, two layers 9" 2, 3 or 4 350° 30-35
Yellow, two layers 9" 2, 3 or 4 350 ° 30-35
White, two layers 9" 2, 3 or 4 350° 25-30

Bundt tube 1 or 2 350 ° 35-45
Cupcakes 2, 3 or 4 350° 15-20

Sheet Cake 15" x 10" 2, 3 or 4 350° 20-25
Angel Food tube 1 375 ° 30- 40

Pound Cake loaf 2, 3 or 4 325° 40-50

Snacking Cake 8" x S' 2, 3 or 4 375 ° 30-35

Pies

Two Crust

Fruit, fresh 9" 2, 3 or 4 4000-425 ° 35-55
Fruit, frozen 9" 1 400°-425 ° 45-60

One Crust

Custard, fresh 9" 2, 3 or 4 350° 35-40

Pie Shell 9" 2, 3 or 4 400 ° 8-12

Cookies

Chocolate Chip 2, 3 or 4 350°-375 ° 8-12

Peanut Butter 2, 3 or 4 3500-375 ° 8-12

Sugar 2, 3 or 4 3500-375 ° 8-12

Brownies 8" x8" 2, 3 or 4 350 ° 30-40

Breads

Yeast

Loaf loaf i or 2 375° 30-40
Rolls 2, 3 or 4 3750-400 ° 15-20

Quick

Loaf, nut or fruit loaf 2, 3 or 4 350° 45-60
Gingerbread 9" x 9" 2, 3 or 4 350° 40

Cornbread 8" x 8" 2, 3 or 4 400°-450 ° 15-30
Cornbread Muffins 2, 3 or 4 400° 10-20
Biscuits 2, 3 or 4 4000-425 ° 10-20
Muffins 2, 3 or 4 400 ° 15-25

*Thebottomrackpositionis#1.

*°Timesare onlyapproximateandmayvary"dependingontilerecipeused.

Temperature Conversions

°Fahrenheit 200 250 275 300 325 350 375 400 425 4,50
°Celsius 100 120 140 150 160 180 190 200 220 230

PAGE 12

Common Baking Problems and Causes

If you have c,arefully followed the basic instructions and still experience poor results, these suggestions
may be helpful.

Problem Cause Problem Cause

Slow baking Baldng or roasting time too Excessive Too little leavening.
or roasting, short, shrinkage. Overmixing.

Temperature too low. Pan too large.
Oven out of calibration. Oven temperature too high.

Old oven out of calibration. Baking time too long.
Incorrect use of aluminum foil. Pans too close to each other or

Oven not preheated. I , oven wall. ,
Oven door opened frequently. Crumbly or dry Improper measurement of"

Too many pans on racks, texture, sugar, baking powder, liqnid

Cakes are uneven. Pans touching each other or or fat.

oven walls.

Old baking powder.

Batter uneven in pans. , Oven temperature too high.
Oven temperature too low or . Baking time too long.

baking time too short. Uneven texture. Too much liquid.

Range not level.
Undermixing.

Too much liquid. " Oven temperature too low.

Baking time too short.

Cakes high in the Temperature too high. Cakes have tunnels. Not enongh shortening.
middle. Baking time too long. , Too much baking powder.

Overmixing. Overmixing.

Too milch flonr, i ] Oven temperature too high.

Pans touching each other or

R i i

oven walls. Cakes crack on Batter overm_xed.

Oven temperature too high.

Cakes fall. Too much shortening or sugar.

Too much ]eavening.

Too much or too ]ittle liquid.
Temperature too low. Cakes not done Temperature too high.

Old or too little baking powder, in the eenter. Pan too small.
Pan too small. Oven temperature too high.

Oven door opened frequently, too brown. Pans touching each other or

Cakes don't brown Oven not preheated, oven wall.
on the bottom. Pans darkened, dented or Edges of crust too thin.

wa'ped. Pies don't brown Using shiny metal pans.

Cakes don't brown Oven temperature too low on the boROm.
on the top. Overmixing. IRes have soaked Temperature too low at start of

Too much liquid. ' crust, _ ba_ng, i

Incorrect pan size or too little Filling too juicy.

batter in pan. Using shiny metal pans.

Oven door opened too often. I

Cakes, cookies, Oven not preheated.
bisetfits too brown Pans touching each other or
on the bottom_ oven walls. " i '

• " Using glass, darkened, warped ......

, I

or dull finish metal pans,

Incorrect rack position.
Incorrect use of aluminum foil.

PAGE 13

Roasting Place the meat f_it-side-up on a rack in a shallow

roasting pan. Placing tile meat on a rack holds it

Roasting

is the method for

eoo_angl_-1_mrge,tender out of the drippings, thus 'allowing better heat
cuts of meat uneovered, without adding circulation for even cooking. As the fat on top of
moisture, the roast melts, the meat is basted naturally,

eliminating the need for additional basting.

General

Tips

Most meats are roasted at 325_F. It is not The cooking time is determined by"the weight of
necessary" to preheat the oven. Place the roasting the meat and the desired doneness. For more

pan on a rack which has been placed in either of aecnrate results, use a meat thermometer. Insert
the two lowest rack positions, it so the tip is in the center of the thickest part of

the meat. It should not touch fat or bone.

Use tender euts of meat weighing three pounds

o_ood choices are: beef rib, Remove the roast from the oven when the

Someor more.

ribeye, top round, high quality tip and rump thermometer registers approximately 5°F below
roast, pork leg and loin roast, veal and lamb leg, the doneness wanted. As the meat stands, the

shonlder roast and cured and smoked hams. temperature will rise.

Season meat, if desired, either before or after [ NOTE: For more information On cooking meat ]
roasting. Rub into the surface of the roast if _d poultry; contact the USD A Meat and J

added before cooking. I Po_fl_ Hotline at 1-800;535-4555. ]

Roasting Chart (Thawed Meats Only)

Approximate Oven Approximate

Weight Texnperature in °F Internal Roasting Time

Cut of Meat (pounds) (not preheated) Temperature (mln. per potmd) °
Beef

Rib Roast (cut side down) 4 to 8 325° 140 ° (rare) 25 30

]60_ (medhlm) 30 35

Bib Eye Roast 4 to 6 325 ° 140° (rare) 25-30

160* (medium) 30-35

Loin Tenderloin Roast 2 to 3 400 ° 140° (rare) 20-'25
Top Sirloin Roast 3 to 6 325 ° 140 ° (rare) 25-30

160° (medium) 30-35

Pork

Shoulder Blade Roast, Boneless 4 to 6 325° 160 ° 35-45
Shoulder Blade Boast 4 to 6 325 ° 160 ° 30-40

Loin Blade or Sirloin Roast 3 to 4 325° 160° 35-45
Ham, Ha/f (fully cooked) 5 to 7 325 ° 140 ° 25 35

Ham, Half(cook-before-eating) 5 to 7 275° 160° 35 45

Lamb

Shoulder Boast, Boneless 3-U2 to 5 325 ° 160° (medium) 35-40

170° (well) 40-45

Leg, ',','hole 5 to 7 325° 160_ (medium/ 30-35

170 ° (well/ 35-40

Veal

Rib Roast 3 to 5 325 ° 170 ° 40-45
Shoulder, Boneless 4 to 6 325 ° 170° 40 45

r'oultry

Turkey, unstuft'ed °* 12 to 16 325° 180°-185 ° 18 20

16 to 20 325° 180°-185 ° 16-18

20 to 24 325 ° 180°-185 ° 14-16

Turkey, Breast 3 to 8 325° 180° 30 40
Chicken, Fryer 2-1/2 to 3-i/2 375° 185° 20-24

Chicken, Boaster 4 to 6 375 ° 185 ° 20-25

_Times are approximate and may vary depending on the type of range used.

_°Stuffed turke,_.s take longer to cook; refer to cookbooks for approximate time.

PAGE 14

Broiling The distance from the heat source depends on

the thickness of the meat. Thin cuts (3/4 to 1

Broiling is a method of cooking used for tender

inch) should be placed 2-3 inches from the heat;

steaks, chops, hamburgers, chicken, fish, and thicker cuts should be placed 3-5 inches from

some fi'uits and vegetables. The food is placed the heat. Broil until the top of the meat is

directly under the burner. The degree of brovamd. It should be approximately half cooked
aloneness is determined by"the distance between by the time the top is browned.

the meat and the burner, and the length of
broiling time. If you plan to season the meat, it is better to do

so after the surface has browned. Salt tends to

General Tips delay browning which can result in overcooking.
Broiling requires the use of the broiler pan and Salting before cooking also draws the juices out

insert supplied with your range. It is designed to of the meat, causing dryness.
drain excess liquid and fat away from the cooking Never leave a soiled broiler pan in the oven after

surface to prevent spatters, smoke and fire. broiling. Drippings might become hot enough to
For easier clean-up, line the broiler pan (bottom ignite if exposed directly to the burner.

piece) with aluminum foil and spray the insert
with a non-stick vegetable coating. Do not cover Setting the Controls

the broiler pan insert with almninum foil as this 1. Before broiling, trim excess fat to prevent
prevents fat from draining into the pan below, excessive spattering or smoking. Cut slashes in

The broiler can be preheated, however, do not the outer edges of the meat to prevent curling
preheat the broiler pan. during cooking.

To prevent excessive spattering and smoking, 2. Turn the OVEN TEMP knob to Broil. Be
trim excess fat from the meat. Increasing the sure the OVEN SET switch is in the

distance between the meat and the heat source Bake/Broil position.
will also help. 3. Place the broiler pan on the recommended

rack position shown in the broiling chart. If

Broiling Chart the food is placed too close to

Until you become more familiar with your new range, the burner, overbrowning and
use the followingchart as a guide when broiling foods, smoking may occur. Generally

for a brown exterior and rare

Qumdily &/or Approx. Minutes/Side

Food Thiel_ess Position Doneness 1st Side 2nd Side interior, the meat should be

Bacon thickslice middle well 4 5 1-2 close to the burner. Place the
BeefPatties 3/_,,thick middle rare 3-4 _-3 pan fitrther down if you want

middle medium 5-6 3-4 the meat well done.
middle well 5-6 4 5

4. Follow the suggested times in

Steaks 1"thick bottom rare 3-4 3-4

bottom medium 5-7 4-6 the broiling chart. Meat should
bottom well %8 6-7 be turned once about halfway

1½"thick bottom rare 7-8 5 6 through its cooking time,

bottom medium 8-10 6-8
bottom well 10-11 8-9 5. Check the doneness by cutting

ChickenBreastHalves bottom well 8-9 74 a slit in the meat near the

Fish Fillets 1"thick middle 5-6 3-5 center to check the color.

½" thick middle 4 5 3-5

Ham Slices ½" thick middle 5-6 4-5

(precor_ked)

Pork Chops (450°) 1"thick bottom well 12-14 8 9
Weiners/Sausage middle 2- 4 2-3

' (precooked)

PAGE 15

Delay Start Oven Cooking Example:

Tile delay start cooking feature is used to turn Food is to cook for 11_hours at 350°F.
the oven on and off at a preset time-of-day. This 1. Press the COOK TIME button.

feature ean be used to delay the start of any
eooking operation. 2. Turn the SET knob until i:30 (1 hour, 30

The delay start oven cooking feature will not minutes) appears in the display.

operate unless the clock is fimctioniug and is set
to the eorrect time-of-day.

OVEBSET SET

TINED

BA,E - O +

TIMER COOK OVEN

M}N 'SEC TIME STOP

BAKE

3. Depress the OVEN SET switch to the Timed
Bake position and turn the OVEN TEMP

knob to 350°F. The oven will automatically

To Bake by Time turn on.

(with immediate start):

1. Placethe food in the oven.

2. Press and release the COOK TIME button. To Bake by Time

0:00 appears in the display for 3 seconds and (with delayed start):

the • triangle indieator will light above the 1. Place the food in the oven.

COOK TIME button.

2. Press and release the COOK TIME button.

3. Enter the cooking time (how long you wish 0:00 appears in the display for 3 seconds and
the food to cook) by turning the SET knob. the • triangle indicator will light above the

The time will appear in hours and minutes. COOK TIME button.
The _ baking symbol light in the display and

the • triangle indicator will flash above the 3. Enter the cooking time (how long you wish

OVEN STOP button, the food to cook) by turning the SET knob.

The time will appear in hours and minutes.

4. Depress the OVEN SET switch to the Timed The _ baking symbol will light in the display

Bake position and turn the OVEN TEMP and the • triangle indicator will flash above

knob to the desired temperature. The oven the OVEN STOP button.

automatically turns on and the display begins 4. Press and release the OVEN STOP button.
to count down the time remaining. The • triangle indicator will light above the

5. An alarm will sound at the end of cooking and OVEN STOP button.
the oven will automatically turn off. To turn 5. Enter the time you wish the oven to turn off

alarm off, press any button, by turning the SET knob.

6. At the end of cooking, turn the OVEN TEMP 6. Depress the OVEN SET switeh to the Timed
knob to Off. Bake position and turn the OVEN TEMP

To Cancel: knob to the desired temperature. The oven

automatically turns on and off at the preset

Turn the SET knob to :00. times.

7. An alarm will sound at the end of cooking and
the oven will automatieally turn off. To turn
the alarm off, press any button.

8. At the end of cooking, turn the OVEN TEMP
knob to Off.

PAGE 16

Example: CARE AND CLEANING

Food is to cook for 21/.2hours at 350°F. You wish Sealed Gas Burners and
the food to be eooked by 6:00. Cooktop

1. Press the COOK TIME button.

2. Tuna the SET knob until 2:30 (2 hours, 30
minutes) appears in the display.

Sealed Gas Burners

The four sealed burners are secured to the
cooktop and are not designed for removal. Since

they are sealed into the eooktop, boilovers or
spills won't seep underneath the eooktop. Thus,

there are no hidden spills to clean.

3. Press the OVEN STOP button.
Tile burner caps should be cleaned as necessary

4. Turn the SET knob until 6:00 appears in the with soap and water. Do not allow water to enter

display, the gas tube opening. To prevent this, use only a

5. Depress the OVEN SET switch to the Timed damp, not wet, cloth for cleaning. Plastic or

soap-filled scouring pads may also be used for

Bake position.

difficult soils.

For burned-on soils, oven cleaner may be used
on tile porcelain burner caps. Spray the oven
cleaner sparingly to prevent it from gettiug on

the other surfaces of the range. Rinse
thoroughly.

Clean the gas ports with a straight pin. Do not

6. Turn the OVEN TEMP knob to 350°1< enlarge or distort the ports. Do not use a

The oven will turn on at 3:30, cook the food for wooden toothpick since it may break offaud clog
2½ hours and will automatically turn offat 6:00. the ports.

Porcelain Cooktop

Additional Information: Tile eooktop on ),our sealed gas burner range is

designed with two eontoured wells which

To cancel a program: Press the COOK TIME contain spills until they ean be wiped up. This
button then turn the SET knob until the display eooktop does not lift-up nor is it removable. To

reads 0:00. The current time-of-day will prevent damage to the range, do not
reappear in the displa_ Turn the OVEN TEMP attempt to llft the cooktop for any reason.

knob to Off. All spi]lovers, especially acidic spillovers, should
To eheek a program: Press the COOK TIME be wiped up as soon as possible with a dry cloth.

button to see how long food will cook. Press the To prevent possible cracking or chipping of the
OVEN STOP button to see what time the oven porcelain, never wipe a warm or hot surface with

will turn off. a damp cloth. Once the surface is cool, clean
To prevent accidentally changing the with warm, sudsy water.

program: Press the TIMER button. The Do not use abrasive or caustic cleaning agents on

• triangle indicators flash above COOK TIME the porcelain finish for they will permanently"
and OVEN STOP to show that the oven is damage the finish.

programmed for a delay start cooking operation.

PAGE 17

Continuous Clean Oven To remove heavy spillovers: Brush offheavy

(select models) soil with a nylon brush or plastic pad. Do not

use paper towels, cloths or sponges because

The finish of a continuous clean oven contains a the oven walls are rough and particles of these
special catalyst and is identified by its dark gray materials will rub off on the walls. Rinse the area
color and its rough, porous texture. The rough with clear water only.
texture prevents grease spatters from forming

beads which run down the walls leaving Hints
unsightly streaks. Rather, the surface absorbs Brittle crusts or stains can be loosened by gently

spatters and allows them to spread, thus tapping the stain with a wooden or plastic
exposing a larger area to the hot oven air. The utensil. Brush away any loose soil that flakes off.

eatalyst, when exposed to heat, speeds the Varnish-like stains usually need to be softened
oxidation of the soil. with a small amount of water or a damp cloth.
The cleaning action automatically begins Any remaining soil will gradually reduce with

whenever the oven is turned on for baking or continued oven use at normal baking
roasting. The oven must be used for eleaning to temperatures.

take place - no cleaning will occur when the . :
oven is off. The special catalytic finish must be NOTE, Do nOt use any _e _0 en cleaner,

exposed to hot oven air before the soil will begin powdered cleansers; soap, detergent or paste on
to gradually reduce in size. any _fifimxous _l_mfing_surface! M!0; do not

_ any abr_ive _a_erials; stee! wooll s_

Factors Affecting Cleaning Time

The length of cleaning time will depend on these lamage fhe fln_hi :
taetors: Avoid spillovers by using utensils that are large

• the type of soil, enough to hold the food. A cookie sheet or piece

• the amount or size of soil, of aluminum foil, just a litfle larger flmn the pan,
can be pieced on the rack directly below the rack

• the oven temperature, and holding the utensil to catch spills.

• the length of time the oven is in use. Over a period of time, wear marks may appear

For exanlple, the higher flm oven temperature, on the embossed rack supports. This is normal
the faster the cleaning action. In addition, longer and results from sliding the racks in and out of

baking times will reduce the soil faster than short the oven. Wear marks will not affect the cleaning
periods of oven use. Heavy- or fresh soils may action of the oven.

require continued use of the oven before they

fade or can be wiped up manually. The oven will Manual Clean Oven

appear presentably clean, even though some
spatters may be present. (select models)

You may clean the porcelain enamel oven

Manually Cleaning Heavy Spillovers interior of your Maytag range using a
The c_ntinuous clean oven finish will clean most commercial oven cleaner. Be sure to follow all

spatters during normal oven use unless there is a the package instructions and avoid getting the
heavy buildup of soil. Heavy spillovers such as oven cleaner on any of the other surfaces of the

pie or casserole boilovers will not clean range.
effectively without some manual help. The Your oven may also be cleaned with warm sudsy

emsty or varuish-like stains that form from these water, mild abrasive cleaners and plastic scouting
spillovers clog the pores and prevent the finish pads. Do not use metallic scouting pads because

from being exposed to the hot oven air. This they can scratch the surface. Never wipe a warm
greatly reduces the cleaning effectiveness of the or hot surface with a damp cloth as cracking and

finish, chipping may result.

For ruore information on cleaning your

These crusty or varuish-like stains nmst either be

Maytag range, refer to the cleaning chart

removed or broken up before the cleaning can on pages 19-20.
effectively take place.

PAGE 18

RANGE CLEANING CHART

Cleaning Agents*

Many different cleaning agents are recommended for the various paris of the ranges. The following brand
names may help you to make an appropriate selection:

1. Mild abrasive cleaners such as Bon Ami, Soft Scrub, Bar Keepers Friend, Cameo.

2. Mild liquid sprays such as Fantastik, Formula 409.

3. Glass cleaner such as Windex, Glass Plus.

4. Plastic and nylon scouring pads.
DO NOT USE abrasive cleansing powders such as Comet or Zud, soap filled scouring pads like S.O.S. or

Brillo, commercial oven cleaners, or an automatic dishwasher except when indieated.
Be certain all range parts are cool before handling to avoid damage.

°Brand names of eleanil_gagents are trademarks of the respective manufacturers.

Part Cleaning Agents Tips and Preeautlons

Baked Enamel: Soap and water Wash, rinse, dry with soft cloth.

Side Panels Mild liquid sprays Do not use oven cleaner or abrasive agents.
Control Panel Glass cleaners

Broiler Drawer

Broiler Pan and Insert Soap and water Pretreat the broiler pan and insert with a non-stick

Plastic or soap-filled scouring vegetable coating such as Pare or Mazola to make

pads cleaning easier.

Dishwasher Soaking makes cleaning easier.

Burner Grates Soap and water

Soap-filled scouring pads
Dishwasher

Control Knobs Soap and water Wash, rinse, dry with soft cloth.

Mild liquid sprays For ease of eleamng, remove knobs by pulling
Glass cleaners forward.

Glass Oven Door Soap and water Avoid using excessive amounts of water which may

Glass cleaners seep behind the glass.

Metal Finishes and Trim Soap and water Do not use oven cleaner or abrasive agents.

Mild abrasive cleaners Bemove stubborn soft with a paste of mild abrasive

cleaner and water.

Polish with a soft cloth.

Continuedon nextpage

PAGE 19

Range Cleaning Chart (continued)

Part Cleaning Agents Tips and Precautions
Oven Interior

Continuous Clean Cleaning action begins Brush off heavy soil with a nylon or plastic pad. Do

(select nmdels) whenever the oven is on. not use paper towels, cloths, or sponges because

The oven must be used for the oven walls are porous and particIes of these
cIeaning to take place, materials will rub off on the walls.

Higher overt temperatures Rinse area with clean water only:

and longer baking times Do not use any type of oven cleanel; cleanser or
speed the cleaning action, detergent on this surface.

Manual Cleat3 Soap and water Do not use metallic scouring pads because they will

(select models) Mild abrasive cleaners and scratch the surface.

plastic pads When using commercial oven cleaners follow the

Commercial oven cleaner manufacturer's instnlctions.

Oven Racks Soap and water If racks become difficuIt to slide, a thin coat of

Plastic scouring pads vegetable oil on the underside of the rack will
Cleansing powders make sliding easier.

Soap-filled scouring pads

Plastic Finishes: Soap and water Do not use abrasive cleansers.

Door Handle Mild liquid sprays
Control Panel Trim

Endcaps
Manifold Panel

Porcelain Enamel Top and Soap and water Wipe up all spillovers immediately with a dry cloth -

Back Panel Mild abrasive cleaners especially acid spills (milk, fruits, tomato, etc.).

Mild liquid sprays Never wipe a warm or hot surface with a damp

cloth as cracking and chipping may result.

Sealed Gas Bunlers Soap and water Wait until the cap cools before cleaning. Cleaning a

Plastic scouring pads hot burner cap may cause the porcelain to crack.
Soap-filled scouring pads Do not allow water or cleaning agents to enter the

gas tube opening. To prevent this, use only a
damp, not wet, cloth for cleaning.

For burned-on or difficult soil, oven cleaner mav be

used on the porcelain burner caps. Spray"sparingly
to prevent cleaner from getting on the other

surfaces of the range. Rinse thoroughly.

PAGE 20

MAINTENANCE

Electrical Connection W_'_VING: To reduce the risk ofaccideninl

Uppingof the range, it must be secured by"a

Appliances which require electrical power are properly installed anti-tip device. To check if the
equipped with a three-prong grounding plug

devine is installed properly; use a flashlight and

which must be plugged directly into a properly look underneath the range to see that one of the
grounded three-hole I20 volt electrical outlet, rear leveling legs is engaged in the bracket slot,
If an ungrounded, two-hole or other type The anti-tip device secures the rear leveling leg

electrical outlet is encountered, it is the ro the floor, if properly engaged.
personal responsibility of the appliance

owner to have receptacle replaced with a

properly grounded three hole electrical Light Replacement

outlet. The three-prong grounding plug is Before replacing the light bulb, disconnect the
provided for protection against shock hazards, power to the range. Be sure the bulb is cool

Do not cut or remove the third grounding Do not touch a hot bulb with a damp cloth as the

prong from the power cord plug. bulb may break.

To Replace Panel Light

Grasp the top trim of the backpanel with your

)_ thumbs under the front edge and pull outward

while lifting to release the trim from the catches

_ at each end. Remove the bulb and replaee it with

,. _-4 _3 an 18 watt fluorescent tube. Snap the top trim

back into place and restore the power. Reset the

, eloek to the current time-of-day.

/

Always disconnect power to appliance before servicing. _ _'L.... _ _

Leveling Legs

Some floors are not level. For proper baking,

your range must be level. The leveling legs are

located on each comer of the base of the range.
Level the range by turning the legs.

/ N

PAGE21

To Replace Oven Light CAUTION: The hinge arms are spring

Very carefully unscrew the lens cover with a dry mounted and will slam shut against the range if

potholder to prevent possible harm to hands, accidentally hit. Never place your hand or
then very carefully remove the bulb with a dry' fingers between the hinges and the front

potholder. Replace with a 40 watt appliance oven frame. You could be injltred if the hinge
bulb. Reconnect the power to the range and snaps back
reset the clock to the current time-of-d_'.

To Replace Door

Grasp the door at each side, 'align the slots in tile
door with the hinge arms and slide the door

_ _ @ down onto the hinge arms until it is completely

__ _ seated on the hinges.

Do not attempt to open or"close the door until
the door is completely seated on the hinge arms.

Never tuna the oven on unless the door is
properly in place. When baking, be sure the door

is completely closed. Ibur baking results will be
affected if the door is not securely closed.

Oven Door Proportional Valve

Do not place excessive weight on an open oven

door or stand on an open oven door as, in some Adjustment

cases, it could damage the door, cause the range The LOW setting should produce a stable flame
to tip over and possibly injure the user. when turning the knob from HIGH to LOW.

When opening the oven door, allow steam and The flame should he 1/8 inch or lower and must

hot air to escape before reaching into the oven to be stable on all ports on LOW setting.
cheek, add or remove food. To adjust: Operate burner on HIGH for about

5 minutes to preheat burner cap. Turn knob

To Remove Lift-Off Door back to LOW; remove knob, and insert a small
Open the door to the first stop position (opened screwdriver into the center of the valve stem.

about 4-6 inches) and grasp the door with both Adjust flame size by turning adjustment screw in
hands at each side. Do not use the door handle either direction. Flame must be of sufficient size

to lift the door. Lift up evenly until the door to be stable on all burner ports. If flame
clears the hinge arms. adjustment is needed, adjust ONLY on the LOW

setting. Never adjust flame size on a higher

setting.

:NOTE, Ali gas _a]iis_inen_s Siio_ld be dode:by'
: a :RSa!ifled Servicer :Only':

: ; ,J ,i ,,, ,. .

PAGE22

Removing Range for Cleaning Broiler Drawer

and Servicing Store a clean broiler pan and insert in the broiler

drawer.

When necessary, follow these procedures to

remove the appliance for cleaning or servicing:

To Remove the Drawer

1. Shut offthe gas supply" to the appliance.

Pull the drawer out to the first stop position. Lift

2. Disconnect the eleetrieal supply to the up the front of the drawer and pull it to the
appliance, second stop position. Grasp the sides and lift up

3. Disconnect the gas supply- tubing to the mad out to remove the drawer.
appliance.

4. Slide the range forward to disengage the To Replace the Drawer
range from the anti-tip bracket. (See the Fit the ends of the drawer glides onto tile rails.
Installation Instructions for location of the Lift up the drawer front and gently push in to
bracket.) the first stop position. Lift up the drawer again

,5. Beverse tile procedure to reinstall. If the gas and continue to slide the drawer to the closed

line has been disconnected, cheek for gas position.
leaks after reconneetion. (See the Installation

Instructions for the gas leak test method.)

PAGE23

BEFORE YOU CALL FOR SERVICE

Cheek these points if... • Are the range and oven racks level?
Part or all of your gas range does not • Was good cookwarePoakeware of the proper

operate size used?

• Is the range plug loose or disconnected from * Are you using a tested recipe from a reliable

the electrical outlet (if not wired direct to source? The oven thermostat on your new

range may be more accurate than the one on

the electrical supply)? your old range.

• Is the gas supply eonneeted or turned on?

• Is there 1-2 inches of space between pans

• Are any house fuses blown or circuit and the oven sides?

breakers tripped? • Is the oven bottom positioned correctly?

• Has the power or gas supply to the home • Was the oven vent covered or blocked on
been interrupted? the range surface?

• Are the oven controls properly set?

• Was the electronic control (select models) Food does not broil properly

correctly set? • Are the controls for broiling set properly?

• Is the oven set for delay start? (select (see Broiling section)
models) • Was the proper rack position used? (see

Surface burner fails to light or is unstable Broiling section)

• Was the broiler pan provided with the range

• Are any burner ports clogged? used?

• Is the burner properly positioned? • Was aluminum foil used on the broiler pan

• Is the pilot light out (pilot model)? insert, blocking the slits for fat drainage?

• Is the range plug disconnected from the

electrical outlet (if not wired direct to the Oven light does not operate
electrical supply)? ° Is the bulb loose or burned out?

• Is the light switch in the On position?

Food not baking correctly

• Are the oven racks properly placed for
baking? (see Baking Chart)

• Have you used aluminum foil correctly?

• Was the oven preheated as recommended?

• Are the controls for bake operations
properly set?

PAGE 24

CONSUMER PUBLICATIONS

For more information, order the following booklets from May-tag at tile prices indicated. Send yore" name,
address, booklet title, form number and payment to: Consumer Education Dept., Maytag Company; One

Dependability Square, Newton, IA 50208. Allow 4-6 weeks for delivery

Cooking Made Simple - 272YG ............................................................................................... 50¢

Taking the Lid OffCooktop Choices 298YG .......................... :............................................. 50e

Before YouCall (avoiding unnecessary service calls) - 206YG. ............................................. 50¢

Appliance Buying Guides ......................................................................................................... 50¢ EACH

Washer -- 211YG
Dyer -- 2i2YG

Dishwasher -- 213YG
Electric Range -- 214YG

Gas Range -- 215YG

PAG E 25

RANGE WARRANTY

Full One Year Warranty
For one (1) year from the date of original retail purchase, any part which fails in nolnnal home use will be repaired or

replaced free of charge.

Limited Warranty

After the first year from the date of original retail purchase, through the second year, parts which tNl in normal home
use will be repaired or replaced free of charge for the part itself, with the owner paying all other costs, including labor,

when the appliance is located in the United States or Canada.
Electric Healing Elements: After the second }'ear from the date of original retail purchase, through the fifth year,

all surface elements (solid disc, coil and smooth top), glass cooking surfaces, broil elements and oven hake elements on
electric ranges, which fail in normal home use will be repaired or replaced fiee of charge for the part itself, with the

owner paying all other costs, including lahor, when the appliance is located in the United States or Canada.
Sealed Gas Burners: After the second year from the date of original retail purchase, through the tenth year, sealed

gas burners on gas ranges, which t:ai]in nomaal home use will be repaired or replaced fi'ee of charge for the part itself,
with the owner p*hvingall other costs, including labor, when the appliance is located in the United States or Canada.

Canadian Residents
This warranty covers only those appliances installed in Canada that have been listed with Canadian Standards Association

unless the appliances are brought into Cmaada due to transfer of residence from the United States to Canada.
Limited Parts Warranty Outside The United States Or Canada
For two (2) years ti'om the date of original retail purchase, any part which fails in normal home use will be repaired or

replaced fiee of charge for the part itselI_ with the owner paying all other costs, including labor, when the appliance is located
outside the United States or Canada.

This Warranty gives you specific legal rights, and you may also have other rights which yaw from state to state.

To Receive Warranty Service

First: To locate an authorized service colnpany in your area, contact the Maytag dealer t)om whom your appliance was

purchased or call Maytag Customer Assistance:

US 1-800-688-9900
CANADA 1 800-688-2002

or check in your telephone directory yellow pages.

Second: Should you not receive satist:aetor} warranty service from the dealer or authorized service fire1, or need further

assistance, call or write:

Maytag Customer Assistance

c/o Maycor Appliance Parts and Ser_Sce Co.
A dMsion of May-tag Corporation

EO. Box 2370
Cleveland, TN 373ii

US 1-800 688-9900
CANADA 1-800-688-200"2

When contacting Customer Assistance be sure to provide the model aT_dserial number of your appliance, tile name
and address of the dealer from whom you purchased the appliance, and the date of purchase,

Should you still have a problem, write to: Major Appliance Consumer Action Panel, 20 North Wacker Drive, Chicago,
Illinois 60606. MACAP is an industry sponsored but independent group of consumer experts who receive and act on

complaints fi'om appliance owners.
NOTE: When writing al)out an unsolved service problem, please include the following information:

(a) Your name, address and telephone number;
(b) Model number and serial mnnber (found on the data plate located on the frame around the storage drawer) of

your appliance;

(c) Name and address of your dealer and date the appliance was bought;
(d) A clear description of the problem you are having.

MAYTAG COMPANY * Newton, Iowa 50208

Form No. 849FE-0793 Part No.8111P008-60 MP kitho U.S.A.