www.dexpress.com DIMENSION EXPRESS Fax on Demand (775) 833-3600
This Data Sheet Includes Information On
Maytag
• Product Model Number (s): •
Free Standing Electric Ranges:
CRE9830BCE, CRE9830BCB, CRE9830BCM,
CRE9800CCE, CRE9800CCB and CRE9800CCM
• Dimensions (Actual Size) •
Height of cooking surface: 35 7/8"
Height overall:
Case width:
Depth NOT including handle:
Door swing:
Height at 0" leg adjustment:
• Additional Information •
• Units depth including door handle is 28 1/8".
• Electrical requirements: 120/240 VAC or 120/208
VAC, 60Hz. 50 amp grounded individual circuit
protection is recommended, 40 amp minimum required.
• Proper operation requires use of range hood.
• Cabinetry over cooktop : 30' minimum clearance
between the top of the cooking surface and the bottom
of an unprotected wood or metal cabinet. 24" minimum
when bottom of wood or metal cabinet is protected by
not less than 1/4" flame retardant millboard covered
with not less than no. 28 MSG sheet steel, 0.015"
stainless steel, 0.024" aluminum or copper.
• To eliminate the hazard of reaching over heated
surface units, cabinet storage space located above
the surface units should be avoided. If cabinet storage
is to be provided, the hazard can be reduced by
installing a range hood that projects horizontally a
minimum of 5" beyond the bottom of the cabinets.
• Range complies with U.L. requirements for 0"
clearance from the range to adjacent vertical side walls
and 0" from rear wall.
• For Free-standing installations the cutout opening
width is 30" ± 1/16" minimum. The height of the
countertop is 36" and countertop depth is 25".
• CRE9830BCB and CRE9800CCB : black.
• CRE9830BCE and CRE9800CCE : Monochromatic
White.
• CRE9830BCM and CRE9800CCM : Monochromatic
Almond.
Subject to change without notice. This system is designed to
be updated daily if necessary. Dimension Express is not
responsible for use of superseded, voided, or outdated data
sheets. Because of the difficulty or impracticability of determining actual damages, liability of Dimension Express shall
not exceed $50.00.
Copyright © Dimension Express, 2000.
• NEVER reuse Data Sheets. Data Sheets are subject to change without • Call Dimension Express if you have any questions at (775) 833-3633 •
notice. Dimension Express is a FREE service bureau and is updated daily, • Always refer to a current Code at a Glance or manufacturer directory •
it makes far more sense to spend the time necessary to request new Data • Data Sheet codes change on the first of odd numbered months at 12:01am •
Sheets for each project, as opposed to the problems, time, costs, and risks
associated with reusing old Data Sheets.
46 1/4"
29 7/8"
25 1/2"
20"
36"Height at full leg adjustment:
35 1/2"
255
46 1/4"
Wall View
(not to scale)
(not to scale)
Countertop
29 7/8"
25 1/2"
Wall View
18"
36"
height
35 7/8"
Door open
Locate electrical
supply junction
box or 60" of
electrical cable
within shaded
area.
7" 16"
5 3/4"
30" Min.
30"
Range
(not to scale)
20"
Upper cabinets
can only be 13"
deep maximum.
Over range
cabinet is NOT
recommended.
Can be installed
with the back
against (0") a
vertical
combustible wall,
and the sides
below the cooktop
surface against
(0") combustible
base cabinets.
30" Minimum cutout width
for Free-standing
instalations.
BN274 • A255 • 31469 • 003006 • 02444 • 84915