Maytag 23-11-2234N-004 User Manual
Room Air Conditioner • Dehumidifier
Acondicionador de Aire • Deshumedecedor
Climatiseur • Deshumidificateur
Write down the model and _
serial numbers _]
Use these numbers in any correspondence or
service calls concerning your air conditioner.
Keep your store receipt.
Escriba los nt_meros del
modelo y de la serie
Utilice estos nt;u_leros en cualquier
correspondencia o Ilamada de servicio
referente a su acondicionador de aire.
Guarde el recibo de la tienda.
Inscrivez les numCros de modble et de
sCrie
Rappelez ces num6ros clanstout courrier ou appel pour intervention
concernant le climatiseur. Conserver le recu du magasin.
Model No., Modelo No., N° de modele
Serial No., N0mero de serie, N° de s_rie
Date of Purchase, Fecha de la compra, Date d'achat
ENGLISH Page
Important Safety Instructions .................................. 2
Installation
Before vou start .................................................... 3
Windo_ & mobile installation ............................. 4
Operation ................................................................ 5
Maintenance & Service ........................................... 6
Service & Warranty ................................................ 7
ESPARIOL
Instrucciones im portantes de seguridad .................. 8
Instalaci6n
Antes de encender su unidad ................................ 9
Ventana y portail instalaci6n ............................... 10
Funcionamiento
Controles electronicos ....................................... 11
Mantenimiento y servicio ..................................... 12
Servicio y garantia ................................................ 13
FRANGAIS
Directivesde s_curit{}important ..........................14
Installation
Avant de mettre I'appareil en marche ................ 15
FenC_tre & mobile installation ........................... 16
Utilisation
Commandes dlectronique ................................. 17
Maintenance & d_pannage ................................... 18
Serice & garantie .................................................. 19
@
@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@
@
@
@
@
@
@
or e-mail customerservice@maytagair.com
@
@
@
@
@
For additional questions please call:
1-866-MAYTAG- 1
Keep these instructions for future reference
Important safety instructions ooooooooooooooooooooooooooooooo
Electrical Shock Hazard
• Plug unit only into grounded electrical outlet.
• Do not use an extension cord or plug adapter with this unit.
RECOMMENDED CIRCUIT
WIRE SIZES
(As installed per building
code):
Power Supply:
115V, 60HZ
AC Only 1-Phase
Outlet Requirement:
3-Prong Grounding Type
125 V, 15 Amp
_ 125V
Minimum Wire Size:
#14 (A.W.G.) 3-Wire
Use Copper Wire Only
15A
Circuit Protector:
15 Amp Time Delay Fuse
or Circuit Breaker
• Do not operate unit with filter removed.
• Failure to follow these precautions could result in electrical shock, fire or
personal injury.
• Do not alter cord or plug end. Do not remove warning label on cord.
Important Grounding Requirements
Your unit will operate on any 115 volt, 3-pronged (grounded) 60 Hz circuit. A
separate line is not required, but it is advisable not to overload the circuit with heavy
duty appliances such as washing machines, etc.
For your safety, this unit is equipped with a 3-pronged, grounding plug and must be
plugged into a properly grounded outlet. If your outlet is not of the proper type, it is
your responsibility to have the outlet and wiring changed to the correct type. Do not
cut off the third (grounding) prong. Do not use an adapter.
For Your Safety
Do not store or use gasoline or other flammable vapors and liquids in the vicinity
of this or any other appliance. The fumes can create a fire hazard or explosion.
Do not introduce objects in the air discharge area. This could cause permanent
damage to your unit.
Do not pour liquids on the air conditioner asthis could cause a malfunction. With
the unit unplugged, use a damp cloth for cleaning your unit. This unit does not
require water or ice to be added.
Avoid using strong solvents to clean the air conditioner.
Clean the air conditioner filter every two weeks to avoid overheating caused by air
obstruction. Do not operate without filter.
Do not obstruct the air intake area of your air conditioner, as this could cause
overheating, thus activating the unit's security switch and shutting off the unit.
Do not block air circulation to exhaust tube when in use.
• Do not block air flow inside with blinds, curtains, or furniture.
C)Three-prong grounding plug.
Do not alter plug end.
I_) Grounded three-prong wall
receptacle
C)Single outlet grounding
wall receptacle
2
ooooooooooooooooooooooooooooooooooooooooooooooooooo Installation
Before you start
• Read the instruction manual before operating the
unit for the first time. It contains important
information on operation, safety, maintenance,
service and warranty.
• Keep this instruction manual for future reference.
• Do not start a damaged unit.
• The assembly and connection of the unit must be
carried out according to the instructions. If they
are not followed you run the risk of voiding the
warranty.
• The power cord is located in the rear of the unit.
• Do not allow contact between the unit and water.
Do not cover the air discharge and air intake
louvers of the unit.
Proper venting of the air to the exterior is
required at all times.
Description of Parts on the
Portable Cooling Unit
Control
Panel
Air Outlet
Handle
Caster
Front Panel
Air Intake
Exhaust Port
rial Plate
Cord
Drain Valve
3
Installation ooooooooooooooooooooooooooooooooooooooooooooooooooo
Window Adapter Application
To Air
Conditioner
<3==
Outdoors
Window Installation
1.Attach Exhaust Tube Adapter to the Window Panel with
four Screws (supplied). Make sure that panel is extended
so that screws do not go into sliding portion of panel.
2. Attach the Nozzle to the end of the Exhaust Tube by
turning it counter clockwise onto the tube.
3. • Open the window.
Place the window panel in the window, extending it
to fit the width of the window. Once panel is
extended, the panel can be locked into this width by
tightening the two screws on the top panel. For
casement windows the panel may be installed
vertically with the adapter at the bottom.
• Close the window.
• Insert exhaust tube into window adapter.
4. When not in use, the window adapter may be closed
off with the cap provided.
5. Select Cool or Fan mode. Do not use window adapter with
Dehumidification mode.
6. Select Fan Speed.
7. Adjust thermostat.
Exhaust Nozzle Exhaust Tube
Tube Adapter
@
Mobile Installation
Maintain a clear distance (from walls, furniture, etc.) of at
least 10 inches around the unit to allow proper air circulation
and prevent damage to the unit.
Window
Panel
Mobile Installation
1. Place the nozzle in the exhaust tube.
2. Open the door slightly and position the nozzle
between the door and the door jamb.
Important: Do not over-stretch the exhaust tube or make
any unnecessary bends in it.
Leave at least 10 inches of unobstructed space behind the
unit.
4
oooooooooooooooooooooooooooooooooooooooooooooooooooo Operation
play
Power
Control
Mode
Control
Fan Speed
Control
Display
Mode
Indicators
Timer Timer/Temp
Control Controls
@
ON/OFF
zL
Power Control
The power control turns the unit on and off.
Warning Light o
This light indicates that the internal water tank needs I,#_R
to be drained. The unit will not operate until the /5%
water has been drained. See the next page of this
manual for instructions on how to drain the water. TIMER
Mode Control
(_ The Mode Control has 3 settings: Cool,Dehumidify,
MODE and Fan.
The settings are adjusted with the Mode Control
button. A green light will indicate which setting is
currently being used.
Cooling Mode
0
COOl
During the cooling mode the air is cooled and
hot air is exhausted to the outside air through
the exhaust tube.
Adjust fan speed and temperature to suit your
desired comfort level.
Dehumidify Mode
o
Air is dehumidified as it passes through air
DRY
conditioner, without being in full cooling mode.
(Note: The warm air exhaust hose must vent inside
the room when using Dehumidify Mode, not
outside as it does when cooling. If the unit is
vented outside, some cooling will occur.)
Fan Mode
O
Air is circulated throughout the room with no
FAN
cooling. (Note: unit does not need to be vented in
Fan mode.)
FAN SPEED
T_MPFI{MI R
Fan Speed
The Fan Speed Control has 3 settings: High, Medium,
and Low.
Timer
Auto turn off:
With machine in fan mode, press timer button
to select number of hours you would like the unit
to run in airconditioning mode until it
automatically shuts off.
Auto turn on:
With machine powered off, press timer button
to select number of hours until you would like
the unit to automatically start running in
airconditioning mode.
_ Temp / Timer Set buttons
S_T
Used for adjusting the timer and thermostat.
The default display is room temperature.
When "+" or "-" button is pressed, the set
temperature is displayed and may be adjusted. After
15 seconds the display will revert back to room
temperature.
By depressing both buttons at once, the display will
toggle between Celsius and Fahrenheit.
5
Maintenance & Service oooooooooooooooooooooooooooooooooooooo
Cleaning and Maintenance
• The unit has an air filter that must be cleaned with
water every two weeks and put back in the unit after
it is completely dry.
• The air discharge grille can be cleaned with a rag or
sponge, warm water and mild detergent.
• Never use hot water, bleach, gasoline, acids, cleaning
fluid or a brush to clean the unit. This will damage
the cabinet and the air discharge area.
• Do not wash the unit with a hose.
Before using at the start of a season
• Clean the air filter.
• Clean the cabinet and air discharge areas if necessary.
Draining excess water
Drain excess water from the tank by placing a pan
under the lower drain valve, remove the drain plug, and
let the water drain into the pan. When the water stops
draining out, replace the drain plug, put the tube back
in the clip pointing up, and remove the pan of water.
Operate the air conditioner in fan mode to dry the
interior of the unit.
Removing the Filter
r.f-'?:---
Service Instructions
Read carefully before calling for service
If the unit fails to start
• Make sure the unit is plugged into an outlet.
• Make sure the unit is not in the off position.
• Make sure the circuit breaker has not been tripped.
If the unit does not cool sufficiently
• Make sure the exhaust tube and nozzle fit correctly
to each other and to the window adapter.
• Make sure the exhaust tube is not bent.
• Adjust the thermostat to a lower temperature.
• Make sure the exhaust tube and nozzle have nothing
inside them.
If the unit istoo loud
• Make sure the exhaust tube and nozzle fit correctly
to each other and to the window mount.
• Make sure the exhaust tube and nozzle have nothing
inside.
Air Conditioner Remote Control
The functions work the same
as your air conditioner's touch
controls.
Batteries: Remove the cover
on the back of the remote
controller and insert the
batteries with the (+) and (-)
poles pointing in the proper
direction.
CAUTION:
• Use only AAA or
IEC R03 1.5V batteries.
• Do not attempt to recharge the supplied
batteries
• All batteries should be replaced at the
same time.
• Do not dispose of the batteries in a fire as
they may explode.
• Do not mix old and new batteries.
• Do not install the batteries with the
polarity (+/-) reversed.
• Keep batteries and other things that could
be swallowed away from young children.
Contact a doctor immediately if an object is
swallowed.
G
Loading...