Page 1
re l
o
ffice
R
PARTS LIST
Wood Doors for Low Wall Cabinet
Model No. VLCWD
Name Part
K
REALS045
4mm x 25mm
L
REALS017
3.5mmx16mm
M
REALS402
Lock w/Keys&Ring
J
HB
HB
HB
HB
Qty.
8
8
2
4
Spare
Qty
1
1
S
T
U
PartName
REALS130
3mmx14mm
REALS171
Bar Lock
REALS106
Door Catch
E
R
A
W
D
R
A
H
HB
HB
HB
Spare
Qty.
Qty
12 2
2
2
ASSEMBLY INSTRUCTIONS
CALL 1-800-822-8037 FOR ASSISTANCE
P/N VLCWD Rev 07 09/05/14
www.mayline.com
REALS010
Handle-Silver
HB
R
REALS025
Latch
-Items with HB are in the hardware box.
-Refer to page 9 for Pre-Installed Replacement Parts.
2
VLCDHB
1
Page 2
3
IMPORTANT!
PARTS LIST
Part
Qty.
1
1
PartName
E1
VLCWD**
Left Inner Door
E2
Left Outer Door
Qty.
Name Part
D1
VLCWD**
Right Outer Door
D2
VLCWD** VLCWD**
Right Inner Door
**Denotes Color Code
-For optional Black Handle, part number REALS011 can be ordered.
Replacement #
Qty.
1
1
Review ALL instructions before beginning assembly . These
instructions are provided to avoid problems that may occur from
improper assembly or installation. Mayline and/or its distributor
are not responsible for failure resulting from improper assembly
or installation of this product. Moreover, all warranties are void
for failure to follow these assembly instructions.
1
REALS011
Handle-Black
4
*Wood Cabinet and shelves are purchased separately.
For ease of installation, remove shelves before
2
installing the doors.
Page 3
2
D2
D1
D1
3
M
L
M
E1
Note: Adjust door alignment as necessary
by using the adjustment screws on the hinges.
K
N
Page 4
4
5
After door installation is complete replace shelves.
Page 5
Page 6
Real Office Care Instructions
Finish Color Matching
Proper Care of Wood Surfaces
With proper care of the wood surfaces and finishes, your office furniture will
provide elegance and convenience for years. Please reference these easy-to-follow
guidelines whenever you have a question.
•
Clean all surfaces frequently with a soft cloth dampened with warm water,
moving the cloth with the grain.
or any wax or oil base products.) Never use paper towel.
•
Immediately remove any liquids that come in contact with wood surfaces
with a blotting action.
•
Lift objects to move them, never pull them across the finished surface.
•
Avoid exposure of furniture to extremes of heat and cold, or to wide
humidity variances.
•
For an additional safeguard, use a protective desk pad. This single item
could ensure a lasting finish by protecting your furniture from possible
damage caused by pens and sharp objects.
•
Do not leave plastic, vinyl or rubber items on finished wood surfaces.
Sustained contact may cause deterioration of the finish due to possible
chemical reaction between the plastic, vinyl or rubber and the catalyzed
lacquer finish.
•
If using a protective glass top, place spacer pads under the glass top to allow
the wood to breathe.
•
Avoid exposure of furniture to strong sunlight. The wood underneath the
finish may change color from prolonged exposure to sunlight.
•
Avoid exposure of furniture to harsh solvents (nail polish remover, acetates,
etc.), as it will cause finish deterioration.
(Do not use furniture polish, solvents
If you have any additional questions please contact our
customer service department at 1-800-822-8037
o
re l
ffice
www.mayline.com
10
Loading...