MAXX MOTORS
by
OPERATION AND PROGRAMMING INSTRUCTIONS
JANUARY 2018
New Generation Maxx Motors
Original Maxx Motors
(with Bluetooth)
Solo – A1 4-5
Domlux 6-8
Cool Motion 6-8
HWM-10 6-8
HWM-20 6-8
MaxxLink Controller 8
Bluetooth Connection Instructions 9-13
(without Bluetooth)
Solo – A1 14-15
Domlux 16-17
Cool Motion 16-17
MaxxLink Controller 18
Remote Transmitters 19
3
New Generation Maxx Motors with Bluetooth
Operation & Programming Instructions
Solo-A1 - New Generation Smart Motor
• New and Quieter Generation Smart Motor with Bluetooth
• Rechargeable Wand Control System with Internal Battery Motor
• 12V DC with Battery charger
Visit link: neosmartblinds.com/motors-accessories/
Wand Buttons and Controls
1. Reference
Up
Down
Set
2. Basic Operations
Pressing and holding up for 2 seconds will bring
your blind in the up position.
Pressing the up button will jog your blind 1/8 of
an inch in the upward position.
Pressing and holding the down button will bring
your blind down to the lower position.
Pressing the down button will jog your blind 1/8
of and inch in the downward.
Double click the up button will bring your blind to
the favourite position 1.
Double click the down button will bring your
blind to the favourite position 2.
Types of Button Presses
Click Press and release
Hold Press and hold for specied time
Double-Click Two clicks in less than 3/4 of a second
4
3. Advanced Operations
Command Description Key Combination
Enter-Settings-Mode Put the motor into Settings Mode. (The motor will jog, and LED
will turn ON.)
Leave-Settings-
Mode
Return the motor to Normal Mode. (This will happen automatically if no action is taken for 30 seconds. LED will turn OFF.)
Adjust-Upper-Limit Start the process of setting the motor's upper rotational limit.
(See Limit Setting Process below)
Adjust-Lower-Limit Start the process of setting the motor's lower rotational limit.
(See Limit Setting Process below)
Save-Limit End the limit setting process, and save the limit at the current
position. (See Limit Setting Process below)
Reverse-Rotation Reverse the direction of rotation. i.e. switch up and down. Enter-Settings-Mode, then
Set-Favourite-1 Set favourite position 1 at this position.
(See Setting Favourite Positions below)
Set-Favourite-2 Set favourite position 2 at this position.
(See Setting Favourite Positions below)
Hold SET for 5 seconds3 or
Hold HEAD for 3 seconds
Enter-Settings-Mode, then
Click SET
Enter-Settings-Mode, then
Click UP
Enter-Settings-Mode, then
Click DOWN
Adjust-Upper-Limit or
Adjust-Lower-Limit, then
Click SET
Hold SET for 5 seconds
3
3
Double-Click SET, then
Double-Click UP3
4
Double-Click SET, then
Double-Click DOWN3
4
3
3- The motor will Jog back-and-forth after this command.
4- This entire key sequence must be completed within 10 seconds.
Limit Setting Process
The motor’s upper and lower rotational limits are set individually. To set a limit:
1. Hold SET for 5 seconds (Enter-Settings-Mode).
2. Choose the limit to set. Click UP (Adjust-Upper-Limit) to adjust the upper limit, or Click DOWN (Adjust-Lower-
Limit) to adjust the lower limit.
3. Adjust the motor to the desired limit position using the UP and DOWN buttons.
4. Click SET to save the limit at this new position (Save-Limit). The motor will jog back-and-forth to conrm the that
the new limit has been saved.
Setting Favourite Positions
Once the upper and lower limits are set, the motor can store two favourite (intermediate) positions.
To set one of these positions:
1. Move to the position you want to store as a favourite position using UP and DOWN.
2. Use Set-Favourite-1 or Set-Favorite-2 to save. The motor will jog back-and-forth to conrm.
You can also clear a favourite position by setting it at the same place again. For example, to delete favourite position
1:
1. Move to that stored favourite position using GoTo-Favorite-1.
2. Call Set-Favourite-1 to delete. The motor will jog back-and-forth to conrm.
Note: you cannot set favourite positions until after the upper and lower limits are both set.
5
The following operation and programming instructions
apply to the following New Generation Maxx Motors:
Domlux
New and Quieter Generation
Smart Motor with Bluetooth
Motor with Transformer and Remote
Control plugs into Electrical Outlet
24V DC Low Voltage with
Transformer
1. Reference
Jog Down/Favourite position 1
Types of Button Presses
Click Press and release
Hold Press and hold for
specied time
Double-Click Two clicks in less than
3/4 of a second
Cool Motion
New and Quieter Generation
Smart Motor with Bluetooth
Rechargeable Internal Battery
Motor with Remote Control
12V DC with battery charger
Ch: 3
Ch: 2
Ch: 1
Up
Down
Channel
Selection
HWM-10 & HWM-20
New and Quieter Generation
Smart Motor with Bluetooth
Hardwire - 110V AC Motor
Note: ALL 4 MOTORS - DOMLUX,
COOL MOTION, HWM-10 & HWM-20
WORK WITH BLUETOOTH
Ch: 4
Ch: 5
Ch: 6
Stop
Jog Down/
Favourite
position 2
Set
Unless noted, all commands are sent from a remote control to a motor, and will only have effect if the remote control’s
active channel has been paired with the target motor. (See Pairing Process below)
2. Basic Operations
Command Description Key Combination
Go-Up Move all the way to the upper limit.
Go-Down Move all the way to the lower limit.
Stop Stop ongoing motion. Click STOP
Step-Up Move the motor up a small amount. Click LEFT
Step-Down Move the motor down a small amount. Click RIGHT
Go-To-Favorite-1 Move the motor to favourite position 1. Hold LEFT for 2 seconds
Go-To-Favorite-2 Move the motor to favourite position 2. Hold RIGHT for 2 seconds
Next-Channel2 Cycle to the next channel (or group of channels) on the
remote, making it active.
1- The motor Will stop on button release if the not yet set.
2- This command is not sent to the motor, and affects only the remote.
1
1
6
Click UP
Click DOWN
Click CHANNEL
New Generation MaxxMotors (Domlux, Cool Motion, HWM-10, HWM-20)
New and Quieter Generation Smart Motor with Bluetooth
Visit link: neosmartblinds.com/motors-accessories/
3. Advanced Operations
Enter Setting Mode
• Put the motor into Settings Mode by Hold SET button for 3 seconds: the red LED light will turn on indicating the blind
is in setting mode.
Pairing a channel
• To pair a remotes active channel with a motor: you must rst place the motor in setting mode by pressing the set
button located on the motor. Once the motor is in setting mode, make sure the remote is on the active channel that
you want to program. Once that’s conrmed, press the set button located on the back of the remote.
Deleting channels
• To delete all paired remotes from the motor: you must press and hold the set option located on the motor for seven
seconds (note: this does not delete limits or favourite positions ). The blind will jog twice indicating that paired
remotes are no longer paired.
Setting The Upper Rotational Limit
• To set the upper rotational limit: you must press the up and set option at the same time for 3 seconds (note: remote
must st be paired to the blind your trying to set the limit for). Once blind is in the limit mode, you may press up or
down depending on the length that you want the upper limit to be at. Once the blind is at the correct level, you may
press the set option located in the back of the remote to save that position.
Setting the lower rotational limit
• To set the lower rotational limit: you must press the down and set option at the same time for 3 seconds (note:
remote must rst be paired to the blind your trying to set the limit for). Once blind is in the limit mode, you may press
up or down depending on the length that you want the lower limit to be at. Once the blind is at the correct level you
may press the set option located in the back of the remote to save that position.
Deleting limits
• To delete favourite position and limits: press the stop button and set located in the back of the remote at the same
time for 3 seconds (note: make sure the remote is programmed to the blind on which you want to erase limits and
favourite positions).
7
New Generation MaxxMotors (Domlux, Cool Motion, HWM-10, HWM-20)
New and Quieter Generation Smart Motor with Bluetooth
Reverse rotation correction
• To Reverse the rotation of the blind: you must rst place the blind in set mode. You may do this by pressing and
holding the set button located on the back of the remote. Once the remote is in setting mode press channel
selection and stop at the same time. Your blind should jog once indicating the rotation is now reversed (Note:
if your up button is bringing the blind in a downward position or the down button bringing your blind in
the upward position - reversing the rotation should correct the issue)
Setting Favourite Position 1
• To save favourite position 1: make sure your blind is in the position that you are trying to save it at. Press the
left button and the set on the back of the remote at the same time blind should jog once indicating that Favourite
Position is saved.
Setting Favourite Position 2
• To save favourite position 2: make sure your blind is in the position that you are trying to save it at. Press the
right button and the set on the back of the remote at the same time blind should jog once indicating that Favourite
Position is saved.
MaxxLink Controller for New Generation Maxx Motors
State-of-the-art WiFi Technology allows you to control your
shades from anywhere in the world:
• Easy to connect with an Android or iPhone
• Compatible with Control 4 smart home system
• Can be used with Maxx Motor with remote control
Quick Start Instructions
Step 1 Download the app by searching “Neo Smart Blinds”
on the Android Play Store or iTunes App Store.
Step 2 Create an account using a valid email.
IMPORTANT! When creating your account, choose
setup code:
MA432
Step 3 Follow the in-app, animated instructions.
Troubleshooting
Visit the link below for detailed instructions.
http://neosmartblinds.com/smartcontroller-help/
8
Blue Link – Overview
BLUETOOTH SECTION - SEE LINK: neosmartblinds.com/bluelink/
Micro USB/wand port/charging port
Red led light
Set/program
Bluetooth port
Set/program - use to program motor to a remote erase memory and save functions
Red led light - indicating motor is in program mode
Bluetooth port - used to install Bluetooth adapter
Micro USB/wand port/charging port - used to charge motor or used as port for wand control
Antenna
Antenna - used to receive signal from remote control
No monthly or hidden fees
No need to connect to your Wi- or router
Key features
• Direct smart phone control
• Blinds position indicator
• Battery level and signal strength indicator
• Blind control using swipe or control buttons
Tech Specs
Neo Smart Blinds Blue Link technical specication
With our mobile app you will be able to:
• Set up your blinds using the built-in guide
• Control your blinds individually
(or as a group, coming soon)
• Set schedules to automate your home
• Put blinds into energy savings mode
(coming soon)
9
Troubleshooting
Visit the link below for detailed instructions.
http://neosmartblinds.com/smartcontroller-help/
Getting Started
1. Dowload the app
Using your phone or a tablet, download and install the Neo
Smart Blinds Blue App.
Neo Smart Blinds Blue Link App Download Google Play
AndroidNeo Smart Blinds Blue Link App Download App Store
Apple Ios
1. Choose a blind
Tap on the blind you want to adjust the limits.
2. Tap on the more menu
The more menu (three dots) is located in the upper right side
of the screen.
3. Choose the limit you need to adjust
Choose to adjust either the upper or lower limit and tap on the
option
4. Adjust the limit
Use the buttons available to adjust the upper/lower limit.
2. No account is needed
No need to create and account, you are ready to start the
claiming your blinds.
Claiming a blind
Claiming a blind is easy and the app has a step by step for this
process. Below you will nd a more detailed explanation about
claiming a blind. Before starting, make sure that:
• Each blind has a Neo Blue Link connected to it.
• The Bluetooth of your device is enable.
1. Tap to claim
Tap on Tap to claim of an unclaimed blind. The app will open
the step by step to claim a blind and will automatically connect
to the blind.
2. Identify blind
Use the button Identify blind to make sure you are pairing
the right blind. The motor will jog back and forth, so you can
visually identify the blind.
3. Conrm blind
If you are in the correct blind, tap the Next button. If not, tap the
return icon (upper left of the screen) and go to step 1.
5. Set limit
When the blind is in the desired position, tap on the button set
limit.
Reversing the direction of a blind
If a blind moves to the opposite direction to your command,
then you need to switch up and down in order to use your blind
properly. To make this change, follow the steps below:
1. Tap to connect
Tap on Tap to connect of the blind you need to reverse the
direction.
2. Tap on the more menu
The more menu (three dots) is located in the upper right side
of the screen.
3. Tap on Reverse direction and conrm
Tap on the Reverse direction option, and then, tap on Conrm
Controlling the blind
You can either control your blind by swiping up and down on
the window frame or by tapping on the buttons below it.
Use the button Show Help to learn what each button does.
4. Press and hold button until it jogs
Press and hold the small button on the side of the blind until it
jogs. You can use the motor’s antenna (white wire) to press the
button. For a second method to pair the blind, please follow the
instructions in the app.
5. Name the blind
Give a name to the blind, it will help you to nd it later in the
blind’s list.
Adjusting upper and
lower limit
Please note that this is an advanced settings and not all blinds
will need to be adjusted. Most installers will adjust each blind
during the installation process. Setting a new limit will overwrite
the old one.
Setting a favorite position
1. Tap to connect
Tap on Tap to connect of the blind you want to set a favorite
position
2. Choose a position
In the blind control, to the right of the window frame, you can
set a favorite position to the blind. Just tap and hold the dot,
then move it to the desired position and release. You can
change the favorite position of your blind any time you want.
3. Set your blind to a favorite position
To put your blind in the favorite position, tap on the heart icon
10
Creating a new schedule
1. Access the Schedule tab
Tap on the blind you want to create a new schedule, then tap
on the Schedule tab.
2. Tap on the plus button
On the bottom of the page, tap on the blue button with a plus
in it.
3. Choose position, time and days
On the window frame, swipe your nger down to set the
blind position. Tap on the Choose time to select the time. The
time is in 12 hours format, don’t forget to choose AM or PM
to set the time properly. Choose when the schedule will run
automatically. The default setting is all days of the week, so tap
on the days you don’t want to add this schedule.
4. Save the schedule
If you want, you can preview the blind’s position for this
schedule. Use the preview button for this. Tap on the Save
button to save you schedule.
Adding a recently created schedule to
another blind
The app saves the last 4 schedules you have created. To copy
and paste these schedules to your blinds, follow the steps
below:
2. Tap on schedule, then use the trash icon to delete it
Tap on the schedule you want to delete, then tap on the trash
can icon. Tap on Conrm to permanently delete the schedule.
Changing the name of a blind
1. Connect to a blind and tap on the more menu
Tap on Tap to connect of the blind you need to change the
name, then tap on the more menu. The more menu (three
dots) is located in the upper right side of the screen.
2. Tap and Rename option and rename your blind
Tap on the Rename option. Enter the new name, then, tap on
save.
Deleting/Unclaiming a blind.
After deleting a blind, you will need to claim/pair the blind again
in order to use it. Be sure you need to delete the blind. Use this
link if you only need to change the name of the blind and this
link to learn how to claim/pair a blind.
There are two methods to delete a blind:
Method 1
1. Choose the blind, tap and hold
In the blind list, tap and hold for some seconds the blind you
want to delete.
2. Conrm
Conrm by tapping on Delete/Unclaim.
1. Connect to a blind and tap on the Schedule tab
Choose a blind in your blind list, tap on Tap to connect and
then, tap on the Schedule tab.
2. Using the blue button, tap on one existing schedule
On the bottom of the page, tap on the blue button on the
bottom of the page. Then, tap on one existing schedule of the
list to add to the blind.
3. Repeat to add more existing schedules the blind
Repeat the steps 3 and 4 to add more existing schedules to
the blind. You can have up to 4 schedules per blind.
Deleting a schedule
There are two methods to delete a schedule:
Method 1
1. Connect to a blind and tap on the Schedule tab
Tap on Tap to connect of the blind you want to delete the
schedule from, and then, tap on the Schedule tab.
2. Tap and hold the schedule to delete
Tap and hold the schedule you want to delete. Conrm by
tapping on Delete.
Method 2
1. Connect to a blind and tap on more menu
Tap on Tap to connect of the blind you need to change the
name, then, tap on the more menu. The more menu (three
dots) is located in the upper right side of the screen.
2. Tap on the Unclaim/Delete and conrm
Tap on the Unclaim/Delete option. Tap on Conrm to
permanently delete the blind.
Show/Hide unclaimed blinds
After claiming all your blinds in the app, you can hide the
unclaimed blinds lists that is visible on the bottom of your
claimed blinds list. To do it so, follow the steps below.
1. Tap on the menu
The menu is located in the upper left corner of the app.
2. Turn off “Show unclaimed blinds”
Find the setting Show unclaimed blinds. Turn off the switch by
either swiping or tapping on it.
Method 2
1. Connect to a blind and tap on the Schedule tab
Tap on Tap to connect of the blind you want to delete the
schedule from, and then, tap on the Schedule tab.
11
Troubleshooting (See Link: neosmartblinds.com/bluelink-troubleshooting/ )
Blue Link - Frequently asked questions
How to setup a blind?
1. First download the Blue Link app to your device: Neo Smart Blinds Blue.
For each motorized blind, add the Neo Blue Link to the motor using the Neo
Blue Link connector. You may need to use a chair or a ladder to be able to
reach connection wire. If that is the case, you should remain on the chair/
ladder until the end of the claim process.
2. Now, enable the Bluetooth on your device, then, open the Neo Smart Blinds
Blue app. Tap on Tap to Claim of the unclaimed blind and follow the steps.
3. Once your blind is claimed, you are ready to go to the next motorized blind
and repeat the same process.
How do I enable the Bluetooth in an Android device?
Each Android device may vary, below is the general guide to enable the
Bluetooth. If this doesn’t work, please see your phone’s manual or support site.
Enabling the Bluetooth via home screen:
1. Swipe down from the top of your screen to fully expand your notication tray
2. Tap on the Bluetooth symbol
3. Tap or swipe the switch so it will be in the “on” position
Enabling the Bluetooth via settings:
1. Tap on Settings
2. Look for Bluetooth or the Bluetooth symbol in your settings and tap it
3. Tap or swipe the switch so it will be in the “on” position
How do I enable the Bluetooth in an Apple device?
Below is the general guide to enable the Bluetooth in your Apple device. If this
doesn’t work, please see your phone’s manual or Apple’s support site.
Enabling the Bluetooth via home screen:
1. Swipe up from the bottom of your screen to fully expand the control center
2. Tap on the Bluetooth symbol to enable it (the icon will be blue)
Enabling the Bluetooth via settings:
1. Tap on Settings
2. Look for Bluetooth or the Bluetooth symbol in your settings and tap it
3. Tap or swipe the switch so it will be in the “on” position
12
Troubleshooting (See Link: neosmartblinds.com/bluelink-troubleshooting/ )
Blue Link - Frequently asked questions
Will the schedules still work when I’m not at home?
Yes. The app doesn’t need to be open, neither in range of the blinds in order for the schedules run automatically.
When I’m not at home, how can I operate my blinds?
You can’t manually change the blind’s position if you are not physically in range. However, you can create schedules to all your
blinds for periods of time that you will not be home. All schedules will run automatically.
Why do I get low signal for some blinds?
The Bluetooth® technology depends largely on the construction and layout of your home, and where you are while you are using
the app to control the blinds. Low signal means that you are not physically in range of the blind and in order to control it, you need
to move towards to the blind until you get a higher signal.
Sometimes the blind takes too long to connect to the app. What should I do?
Bluetooth implementation differs signicantly from device to device. This can cause inconsistent connection times
depending on your phone or tablet. After 10 seconds, if the blind is not connected, return to the blind list and try again.
One or more blinds are “not found”. What should I do?
There are 3 possible causes for this:
1. You may not be in range of the blinds. In this case you just need to move towards to the blinds until you are in range and
the app show the option Tap to Connect.
2. The blind may be in use by another person in the house. In this case, the blind will be available to you as soon as nobody
else is using it.
3. The Bluetooth in your device may be turned off, you just need to turn it on. If you need help to enable the Bluetooth in your
device.
Do I need an internet connection (Wi-Fi or cellular data) to use Blue Link app?
You will only need a Wi-Fi or a mobile data connection to download or update the Neo Smart Blinds Blue app (available for
both Android and iOS devices). Otherwise in everyday use you will only need your Bluetooth enabled.
I have a smart home system at home. Is Blue Linkcompatible with major smart home systems?
Blue Link is not currently compatible with any smart home system. We are currently exploring the possibility of adding major
smart home systems. Check back with us for progress and updates.
What’s the range for the Blue Link? How many do I need for my house?
Up to 10m indoors and up to 30m for open areas, but please note that it depends largely on the smart device used to connect,
the construction and layout of your home, and where you are while you are using the app to control the blinds. It is necessary
one Blue Link per blind.
The app doesn’t show any blind to pair, even though the Blue Link is connected to my blind.
• Make sure you close enough to the blind and that the Bluetooth in your device is not turned off, you just need to turn it on.
If you need help to enable the Bluetooth in your device.
What mobile devices are compatible with the Blue Link?
Smart devices with Bluetooth 4.0 or newer, both iOS and Android. Neo Smart Blinds Blue app is currently compatible with:
• Android 5.1 and newer • iPad 2 and newer (iOS 8 and newer)
• iPhone 4S and newer (iOS 8 and newer) • iPad miniNo need to connect to your Wi- or router
13
Original MAXX MOTORS (without Bluetooth)
X
1
2
X
1
2
6
7
8
9
Operation & Programming Instructions
Switch
Solo-A1 - Original Maxx Motor
Rechargeable Wand Control System with Internal Battery Motor
12V DC with Battery Charger
Command Item Operation Result Illustration
Motor unit
assembling
1 Fix Switch wand with motor using two screws
2 Connect switch wand and motor connector (4 pins)
3 Connect motor power with switch wand (2 pins)
Note: Please disconnect motor power and switch wand con-
nector if this unit needs to be transported after assembling
4 Charging motor battery use a plug charger. Please recharge
motor battery again when the motor alarms DI-DI-DI- or
works faltering.
Charging time: 5 hours. Please take the charger away when
charging full
Up
Stop
Down
Motor
Settings
key
Screws
Switch
wand
Charging
port
Power
connector
(2 pins)
Switch wand
connector
(4 pins)
Change motor
rotation
direction
Lower limit
setting
1 Press UP button If motor goes up, please do
nothing-If motor goes
down, please do next step
2 Press and hold
SETTING button
then press STOP
3 Press UP button Motor goes up, the motor
1 Press and hold
SETTING button
on switch
2 Press DOWN button Motor goes down
3 Press STOP button
when close
to the lower limit
position
4 Press UP or DOWN
button to adjust
the nally position
Release both buttons when
motor sounds DI-DI-DI
rotation direction has been
revised
Release this button
when motor sounds
DI-DI-DIPress
Motor stops
Press UP button
1
X
2
1
2
4
3
5
5 Press SETTING
button
Motor sounds DI-DI-DI-,
lower limit setting has
been set
14
Original MAXX MOTORS (without Bluetooth)
X
1
2
X
1
2
1
2
3
4
5
6
7
8
9
Operation & Programming Instructions
Solo-A1 - Original Maxx Motor
Rechargeable Wand Control System with Internal Battery Motor
12V DC with Battery Charger
Command Item Operation Result Illustration
Upper limit
setting
Favourite
position
setting
6 Press UP button Motor goes up
7 Press STOP button
when close
to the upper limit
position
8 Press UP or DOWN
button to adjust the
nal position
9 Press SETTING
button
1 Press UP or DOWN
button
Motor stops
Motor sounds DI-DI-DI:
upper limit setting has
been set
Press STOP button when
blinds reach your favourite
position
6
8
7
9
1
2 Press and hold
SETTING button
and then press and
hold UP button
3 Press STOP button
when motor
stops
Switch
Roller/
Horizontal
mode
FAQ If nothing works, please check:
Press SETTINGS button on switch 8 times, the working mode
has been changed from Roller to Horizontal or from Horizontal
to Roller
Note: The original factory setting is in Roller blinds work mode
Whether the battery wand and motor is connected properly or if the battery is dead.
If the motor continues running please check:
If the motor continues running in a direction, the limit setting is unsuccessful and need to reset again
Release both buttons when
motor sounds DI-DI-DI: the
setting has been completed
Motor goes to the
favourite position and
stops
15
2
3
Original MAXX MOTORS (without Bluetooth)
-+
M
12
34
56
M
12
34
56
-+
M
12
34
56
-+
M
12
34
56
-+
M
12
34
56
The following operation and programming instructions apply to the
following Maxx Motors:
Domlux
Motor with Transformer and Remote
Control plugs into House Outlet
24V DC Low Voltage with
Cool Motion
Rechargeable Internal Battery
Motor with Remote Control
12V DC with Battery Charger
Transformer
Command Item Operation Result Illustration
Technical
data
Fix the motor Notify:
Eliminate
original
setting on
motor
Battery Specication Li-ion Batter, 1400mAH, 7.4 V. Motor Load Torque 1.1Nm/25rpm
• The side of motor head with SETTING button should
face to you (toward outside)
• Motor antenna should be as straight as possible in
the position far away from metal objects. Directly
contact metal objects is prohibited; otherwise, the
receiving distance will be inuenced seriously.
• Please charge battery when the motor stop working
or work operosely.
Caution: Skip this operation if the factory has programmed the motor with the primary transmitter.
1 Keep pressing the
SETTING
button on the motor
head for
more than 8 seconds
2 Release the button All the records have been
The motor jogs “KA KA”
rstly, then jogs
“KAKA, KAKA”
clear out”
Charge pad
Antenna
Setting
Remote transmitter keystoke sketch
Up
Stop
Down
Conrm
1
Keep pressing Release it
2
Limit
Program
primary
remote
transmitter
with motor
Program
subsidiary
remote
transmitter
with
motor
If the manufacturer has programmed remote transmitter and motors before deliver, the user can skip
the step and go to the next.
1 Keep pressing the
SETTING button on
the motor head
2 When the motor jogs
“KA KA” please
release this button
3 Press the CONFIRM
buttonon the transmitter
If the subsidiary transmitter is unnecessary, please skip this step.
1 Keep pressing the
2 When motor jogs
3 Press the CONFIRM
SETTING button on
the motor head
“KA KA” please
release this button
button on the
transmitter
The motor jobs “KA KA”,
the program has been done.
The motor jobs “KA KA”,
the program has been done.
1
Keep pressing
1
Keep pressing
2
2
Release it
Release it
3
Primary
Transmitter
3
Primary
Transmitter
16
-+
M
12
34
56
1
2
3
3
2
4
5
6
1
2
2
1
3
4
5
6
-+
M
12
34
56
1
2
3
1
2
2
1
Original MAXX MOTORS (without Bluetooth)
The following operation and programming instructions apply to the
following Maxx Motors:
Domlux
Motor with Transformer and Remote
Control plugs into House Outlet
24V DC Low Voltage with Transformer
Cool Motion
Rechargeable Internal Battery
Motor with Remote Control
12V DC with Battery Charger
Command Item Operation Result Illustration
Setup bottom
limit
1 Keep pressing the LIMIT
button on the primary
transmitter for 6 seconds
2 Release the button Motor is under the status
3 Press DOWN button on
4 When motor running close
5 Press either UP or DOWN
6 Press CONFIRM button
transmitter
to the end-point of lower
limit, press STOP button
button
on transmitter
Motor jogs “KA KA” rstly,
then jogs “KAKA, KAKA”
of limit setting
Motor runs down
Motor stops
Motor runs step by step to
adjust lower limit
accurately
The motor jogs “KA KA”,
the setting has complete.
1
Keep down 6S
Primary
3
2
Release
Primary
4
PrimaryPrimary
Setup upper
limit
Charging The motor works with Li-ion battery, please charging it when the motor stops working or works faltering. Please
FAQ If nothing works, please check:
7 Press UP button primary
transmitter
8 When the motor running
close to the end-point of
upper limit, press STOP
button
9 Press either UP or DOWN
button
10 Press CONFIRM button
on transmitter
charge the motor by charger.
Charging time: Charger 5 to 6 hours.
• Please charging the motor battery rstly
• If the motor runs to a direction continually, the user didn’t setup limit successfully, please re-set limit.
Motor runs up
Motor stops
Motor runs step by step to
adjust lower accurately
Motor jogs “KA KA”, the
setting has complete.
5
PrimaryPrimary
7
8
PrimaryPrimary
9
PrimaryPrimary
6
Limit
Conrm
Primary
10
Limit
Conrm
Primary
17
MaxxLink Controller for Original Maxx Motors
State-of-the-art WiFi Technology allows you to control your
shades from anywhere in the world:
• Easy to connect with an Android or iPhone
• Compatible with Control 4 smart home system
• Can be used with Maxx Motor with remote control
Quick Start Instructions
Step 1 Download the app by searching “Neo Smart Blinds”
on the Android Play Store or iTunes App Store.
Step 2 Create an account using a valid email.
IMPORTANT! When creating your account, choose
setup code:
M6707
Step 3 Follow the in-app, animated instructions.
Troubleshooting
Visit the link below for detailed instructions.
neosmartblinds.com/instructions.html
18
MaxxLink Controller for Original Maxx Motors
Two remote transmitters to choose from:
Channel No.
Up
Stop
Down
Power
supply/Group
controlling.
Conrm
Channel -
-+
Channel
Limit
Up
Stop
Down
Channel +
Instruction for transmitter
1. Up 4. Channel
2. Stop 5. Limit (Setting)
3. Down 6. Power supply / Group controlling
• Press “Power supply” key on transmitter, then the LCD screen will light.
At that time, the transmitter is entering into the operation state. Keep the
“Channel” key pressed, the LCD screen shows corresponding channel no.
Then, regarding the corresponding channel, you could do below operation:
1. Programming this channel with receiver
2. Setting motor limit
3. “Up” “Stop” “Down” operations
• Press ”Group controlling” key, the LCD screen shows “AL”.
At that time, you could do below operation:
1. Controlling all motors “Up” “Stop” “Down” operations.
Instruction for remote
1. Select the Channel for Programming:
Press “CHANNEL +” or “CHANNEL -“ to choose the channel until the LED
bright on the channel you want.
2. Programming this channel on the Motor or Receiver:
To have the motor or receiver under the programming state (operating
according to the instructions of the motor or receiver, i.e. keep pressing
SETTING key on the motor head or receiver until thy respond
KA KA OR D--Di--).
Conrm
Limit
3. Then press the CONFIRM key on the remote (do it in 3 seconds after
the motor under the programming state) the motor jogs KA KA or the
receiver sounds Di Di Di Di to conrm the programming succeed.
FIY:
The group channel will be recorded on the motor automatically when the
single channel has been programmed on the motor.
19
MAXX MOTORS
by
www.maxxmar.com
20
Loading...