Maxview MXL003/65, MXL003/85 Instruction Manual

Installation & operating instructions

MXL003/65 & 85 Seeker Wireless

UK contact:

Helpline: [phone]
Email: [e-mail]
Web: www.maxview.co.uk

Maxview reserve the right to change specifications without prior notice
9111403 I ss 6

Visit: www.seekerwireless.co.uk for potential software updates

Contents:

Introduction 2
Proper use & operation 2
Safety precautions 3
Application example 4
Connections & features 5
Product contents 5
Required tools and equipment
Selecting an installation location 6
Positioning Control Box & Panel 6
Attaching Antenna Mount Plate 7
and LNB Park Plate
Electrical installation 8
Attaching Antenna Unit to 9
Mount Plate
Installing cables 9
Installing Control Box 10
Installing Control Panel 10
Connection diagram 11

Introduction:

Please read these instructions fully before using the antenna for the first time. The operation of the antenna has
been designed to be as simple as possible however should you require any technical assistance please contact
Maxview customer service on [phone] or visit www.maxview.co.uk.

Proper use & operation:

The Seeker Wireless is designed to be installed in a motorhome, caravan or horsebox to automatically locate a
television broadcast satellite when the vehicle is stationary. The system comprises of 3 main components.

1. The Antenna which is to be permanently mounted externally to the roof structure of a motorhome/caravan

horsebox. The construction of the roof structure should be suitably robust and have no protruding obstacles

2. The Control Box is designed to be mounted internally in a cupboard it controls the antenna unit through a

cable connection and is powered by 12v DC only.

3. The Control Panel is the user interface allowing commands to be sent to the Control Box and the feedback

to be displayed on an integral screen. It is designed for internal use only. It communicates with the Control
Box either by radio or cable connection.

Use of the equipment for any other purpose than the one specified is not permitted and will invalidate the
Guarantee.

All instructions and models are subject to change. In accordance with policy of progressive product, the company
reserve the right to alter specifications.

Copyright© these instructions are the sole property of Maxview Ltd and may not be reproduced.
Please keep these instructions safe for future reference.

Recycle packaging where facilities exist.

Page 2

Attaching Satellite Dish to Unit 11
Installing Batteries 12
Time and temperature display 12
Pairing Control Panel and
Control Box 13
Cable mode 13
Finding a satellite 13
Starting search mode 14
Pause function 14
Lowering the antenna 14
Ignition mode 15
Connecting to a Satellite Receiver 15
Power consumption 15
Skew adjustment 16
Software update 17
Fault finding 18
Guarantee 19
Specifications 20

Visit: www.seekerwireless.co.uk for potential software updates

Safety precautions:

Read this manual carefully and become familiar with your satellite antenna. Understand its applications, its
limitations and any hazards involved. Failure to follow all instructions listed below may result in electric shock,
fire and/or serious injury. Maxview declines all responsibility in the event of incident or accident if they are due
to a non observation of the installation instructions or the way the product is used.

No modifications are permissible to the Antenna Unit, Control Box or Control Panel.

Installation

• Installation should be carried out by a competent person.

• Take care when working at heights keeping work area clean and tidy to avoid trip hazards

• Use creeper boards where necessary to ensure roof construction can support your weight

• Use a recommended adhesive from page 10 to bond the antenna unit to vehicle roof and follow the

manufacturer’s instructions during application

• Do not travel until adhesive has cured noting that curing times vary with weather conditions

• Power tools should be used in accordance with manufacturer’s instructions

• All electrical work should be carried out by a competent person. If in doubt seek advice from a qualied

electrician

• The Control Box and Control Panel are for internal use only and are not waterproof

Operation

• Before starting your journey check that antenna is in the park position

• The maximum speed of vehicle with antenna mounted on roof is 81mph (130km/h)

• Never operate the antenna if someone is in close proximity of the antenna

• Disconnect power to the antenna before installation or adjusting LNB skew angle

• If high winds or electrical storms are anticipated lower antenna to park position

• Maintain adequate ventilation around the Control Box to avoid overheating

• Do not allow children to operate the antenna unit

• Dispose batteries responsibly

• Remove Control Box fuse before accessing the roof space around the antenna unit

• Do not operate the Seeker Wireless with snow or ice on the antenna

Servicing

• If in the event that you do experience a problem with the system call Maxview Customer Service

[phone] with your model & serial number to hand

• Any inspection or repair must be carried out by Maxview or an appointed representative of the manufacturer

• No regular maintenance required on the system

• Do not remove cover on Antenna, Control Box or Control Panel

• Do not use solvent or abrasive cleaning agents on the system

• Use a soft damp cloth to clean the Control Box and Control Panel

• Use a suitable mild detergent to clean the Antenna Unit

• Do not pressure wash the Antenna Unit

• Check the Antenna Unit xings for mechanical integrity at least once a year

Page 3

Visit: www.seekerwireless.co.uk for potential software updates

Page 4

A. Antenna
The Antenna is mounted to the roof. It uses electric motors to scan for satellite signals. It has 3 cable
connections; 1 for controlling the motors and 2 satellites signal cables from the Twin LNB.

B. Control Box
The Control Box requires wired connections for power, antenna control and satellite signal. It can be mounted
discretely in a cupboard and can be fixed vertically and horizontally.

C. Wireless/wired Control Panel
Wireless technology allows the Seeker Control Panel to be mounted in a convenient position without
unsightly wires. When not in use the panel displays a 24 hour clock and internal ambient temperature.

Application example:

A

B

C

Visit: www.seekerwireless.co.uk for potential software updates

Page 5

Connections and features:

Control Box:

11. Fuse

12. Power Switch

13. Power LED

14. Sync Button

15. Status LED

16. USB update port

17. RECEIVER

18. LNB IN

19. Antenna Connectors

20. RJ25 Panel Connector

21. Installation Button

22. Power Input

Wireless Control Panel

1. Antenna Search button

2. Antenna Park button

3. Antenna position icon

4. Battery status icon

5. Change Satellite Up. Down buttons

6. Wireless mode icon

7. Cable mode icon

8. ON/OFF switch

9. Battery door

10. RJ25 Socket

11. Magnets

1

2

5

4

6

7

3

10

11 12

13

14

16

15

8 9

11

17 18 19 20 22

21

Product contents:

> Antenna Unit / Control Box / Control Panel
> 65/85cm Antenna (separate carton)
> Accessory Pack
> LNB Park Plate x 1
> Control Box bracket x 2
> Control Panel mount x 1
> RJ25 Cable x 1
> Battery 1.5v AA x 2
> Power Cable x 1
> No.10 Screws x 6
> No.6 Screws x 6
> Cable Clips x 6
> M6 Button Head Screw x 4
> M6 Locking Nut x 4
> 6mm Plastic Washer x 4
> Cable Entry Plate x1

Required tools and equipment (not supplied):

> 32mm hole saw
> 2.5mm twist drill
> Power Drill
> No.2 Phillips screwdriver
> Weather Resistant Elastic Adhesive* and Applicator gun
> Surface Cleaner
> 10mm spanner
> Hexagonal socket key 4mm
> Deburrer/Round File/Emery paper
> Conduit (recommend method for securing cables)
> Automotive 2.5mm² cable
> Electrical connector block
> Flylead (for connection to satellite receiver)

*Maxview recommends the following adhesives:
> Sikaflex®-512 Caravan
> Geocel® Geobond HM
> S i k aflex®-252

Visit: www.seekerwireless.co.uk for potential software updates

Page 6

Selecting an installation location:

Positioning the Antenna Unit
> Check for obstructions such as roof lights and vents.
> Check for electrical cables beneath screw fixing points.
> Check Antenna Unit cables will reach Control Box
(Maxview can supply extended cables).
> Do not allow the dish to overhang the edge of the vehicle
> Clearance around antenna system when in use is shown with reference I

Key dimensions (cm) and weights

65cm Seeker: System weight 10kg

A: 17
B: 100
C: 67

D: 65
E: 96
F: ø43*

85cm Seeker: System weight 11kg

A: 17
B: 117
C: 85

D: 87
E: 113
F: ø43*

E

A

D

B C

H

G

F

I

G: 52
H: 15
I: 110

G: 64
H: 14
I: 125 *Mounting plate

Positioning Control Box:

Site the Control Box in a convenient location where:
> Front and rear connections are accessible.
> Cables can be routed and concealed neatly.
> There is an electrical supply of 12V dc permanent and ignition.
> There is adequate ventilation.
> The Control Box is not encased with metal (if using wireless mode).
> Material construction and thickness is suitable for fixings.

Positioning Control Panel:

The Control Panel is designed to be easily visible in the living area as it displays a clock and thermometer when
in sleep mode.
> Do not place near wet hazard areas such as near sinks or bathroom.
> Do not place near heat sources or in direct sunlight.
> Avoid placing Control Panel next to walk ways where it could easily be knocked.