Maxtor STM3320820A, DiamondMax 21, STM3250820A, STM3200820A, STM3300620A Owner's Manual
...
DiamondMax 2
1
B
A
6
3
200 - 320G
AT
November 200
PN: 10043521
© 2006, Maxtor Corporation All rights reserved
Publication number: 100435213, Rev. A
November 2006
Maxtor and MaxFax are registered trademarks of Maxtor Corporation, registered in the
U.S.A. and other countr ies. Maxtor DiamondMax, AutoTransfer, AutoRead, AutoWrite, DisCache, DiskWare, Defect Free Interface, QuickView, and WriteCache are trademarks of
Maxtor Corporation . All o ther b rand nam es or trade marks a re the propert y of the ir ma nufac turers.
Maxtor reserves the rig ht to change, without notice, product offerings or specifications. No
part of this publica tion may be r eproduced in any form witho ut written p ermission of Maxtor
Corporation.
DiamondMax 21 PATA Product Manual, Rev. A i
ii DiamondMax 21 PATA Product Manual, Rev. A
Contents
1.0 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2.0 Drive specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2.1 Specification summary tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2.2 Formatted capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2.2.1 LBA mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2.3 Default logical geometry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2.4 Recording and interface technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2.5 Physical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2.6 Seek time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
2.7 Start/stop times . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
2.8 Power specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
2.8.1 Power consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
2.8.2 Conducted noise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
2.8.3 Voltage tolerance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
2.8.4 Power-management modes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
2.9 Environmental specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
2.9.1 Ambient temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
2.9.2 Temperature gradient. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
2.9.3 Humidity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
2.9.4 Altitude. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
2.9.5 Shock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
2.9.6 Vibration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
2.10 Acoustics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
2.11 Electromagnetic immunity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
2.12 Reliability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
2.12.1 Annualized Failure Rate (AFR and Mean Time Between Failures (MTBF) . . . . 22
2.13 Agency certification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
2.13.1 Safety certification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
2.13.2 Electromagnetic compatibility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
2.13.3 FCC verification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
2.14 Environmental protection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
2.14.1 European Union Restriction of Hazardous Substances (RoHS) . . . . . . . . . . . . 24
2.15 Corrosive environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
3.0 Configuring and mounting the drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
3.1 Handling and static discharge precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
3.2 Breather filter hole precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
3.3 Jumper settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
3.3.1 Master/slave configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
3.3.2 Cable-select option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
3.3.3 Ultra ATA/100 cable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
3.4 Drive mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
4.0 ATA interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
4.1 ATA interface signals and connector pins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
4.1.1 Supported ATA commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
4.1.2 Identify Device command. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
4.1.3 Set Features command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
4.1.4 S.M.A.R.T. commands. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
5.0 Maxtor support services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
DiamondMax 21 PATA Product Manual, Rev. A iii
iv DiamondMax 21 PATA Product Manual, Rev. A
List of Figures
Figure 1. Typical 5V startup and operation current profile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Figure 2. Typical 12V startup and operation current profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Figure 3. Breather filter hole location. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Figure 4. Master/slave jumper settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Figure 5. Ultra ATA cable connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Figure 6. Mounting dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Figure 7. I/O pins and supported ATA signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
DiamondMax 21 PATA Product Manual, Rev. A v
vi DiamondMax 21 PATA Product Manual, Rev. A
1.0 Introduction
This manual describes the functional, mechanical and interface specifications for the following Maxtor
DiamondMax® 21 PATA model drives:
STM3320820A STM3250820A STM3200820A
STM3300620A STM3250620A
These drives provide the following key features:
• 7,200-RPM spindle speed
• High instantaneous (burst) data transfer rates (up to 100 Mbytes per second) using Ultra DMA mode 5.
• Tunneling Giant magnetoresistive (TGMR) recording heads and EPRML technology, which provide the
drives with increased areal density.
• State-of-the-art cache and on-the-fly error-correction algorithms.
• Full-track multiple-sector transfer capability without local processor intervention.
• Quiet operation.
• SeaTools diagnostic software performs a drive self-test that eliminates unnecessary drive returns.
• Support for S.M.A.R.T. drive monitoring and reporting.
• Support for Read Multiple and Write Multiple commands.
• Support for autodetection of master/slave drives that use cable select (CSEL).
®
DiamondMax 21 PATA Product Manual, Rev. A 1
2 DiamondMax 21 PATA Product Manual, Rev. A
2.0 Drive specifications
Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal
power. For convenience, the phrases t he drive and this drive are used throughout th is manual to indi cate the
following drive models:
STM3320820A STM3250820A STM3200820A
STM3300620A STM3250620A
2.1 Specification summary tables
The specifications li sted in the following tables a re for quick reference. For details on specificati on measurement or definition, see the appropriate section of this manual.
DiamondMax 21 PATA Product Manual, Rev. A 3
Table 1: Drive specifications summary for the 320 Gbyte model
Drive specification STM3320820A
Formatted Gbytes (512 bytes/sector)* 320
Guaranteed sectors 625,142,448
Heads 4
Discs 2
Bytes per sector 512
Default sectors per track 63
Default read/write heads 16
Default cylinders 16,383
Recording density 781 kbits/in max
Track density 145 ktrakcs/in avg.
Areal density 114.4 Gbits/in
Spindle speed 7,200 RPM
Internal data transfer rate 1,030 Mbits/sec max
Sustained data transfer rate 72 Mbytes/sec max
I/O data-transfer rate 100 Mbytes/sec max
ATA data-transfer modes supported PIO modes 0–4
Cache buffer 8 Mbytes
Height (max) 26.1 mm (1.028 inches)
Width (max) 101.6 mm (4.000 inches) +/- 0.010 inches
Length (max) 146.99 mm (5.787 inches)
Weight 580 grams
Average latency 4.16 msec
Power-on to ready (max) 15 sec
Standby to ready (max) 15 sec
Track-to-track seek time (typical) <0.8 msec (read), <1.0 msec (write)
Average seek, read (typical) <11.0 msec
Average seek, write (typical) <12.0 msec
Startup current (typical) 12V (peak) 2.8 amps
Voltage tolerance (including noise) 5V ± 5%
Ambient temperature 0° to 60°C (operating)
Temperature gradient 20°C per hour max (operating)
Relative humidity 5% to 90% (operating)
Relative humidity gradient 30% per hour max
Wet bulb temperature (max) 37.7°C (operating)
Altitude, operating –60.96 m to 3,048 m
Altitude, nonoperating
(below mean sea level, max)
Operational Shock 68 G at 2 msec
Non-Operational Shock 350 G at 2 msec
Multiword DMA modes 0–2
Ultra DMA modes 0–5
12V ± 10%
–40° to 70°C (nonoperating)
30°C per hour max (nonoperating)
5% to 95% (nonoperating)
37.7°C (nonoperating)
(–200 ft. to 10,000+ ft.)
–60.96 m to 12,192 m
(–200 ft. to 40,000+ ft.)
2
avg
4 DiamondMax 21 PATA Product Manual, Rev. A
Drive specification STM3320820A
Vibration, operating 5–22 Hz: 0.25 G, Limited displacement
Vibration, nonoperating 5–22 Hz: 0.25 G, Limited displacement
Drive acoustics, sound power (Bels)
Idle** 2.7 (typical)
Quiet seek 3.0 (typical)
Nonrecoverable read errors 1 per 10
Annualized Failure Rate (AFR) 0.34%
Warranty 3 years on distribution units.
Contact start-stop cycles 50,000 at 25°C, 50% rel. humidity
22–350 Hz: 0.50 G
350–500 Hz:: 0.25 G
22–350 Hz: 5.0 G
350–500 Hz:: 1.0 G
3.0 (max)
3.4 (max)
14
bits read
To determine the warranty for a specific drive, use a web browser to
access the following web page:
www.seagate.com/support/service/
From this page, click on the “Verify Your Warranty” link. You will be
asked to provide the drive serial number, model number (or part number) and country of purchase. The system will display the warranty
information for your drive.
DiamondMax 21 PATA Product Manual, Rev. A 5
Table 2: Drive specifi cations summary for the 300 Gbyte model
Drive specification STM3300620A
Formatted Gbytes (512 bytes/sector)* 300
Guaranteed sectors 586,072,368
Heads 4
Discs 2
Bytes per sector 512
Default sectors per track 63
Default read/write heads 16
Default cylinders 16,383
Recording density 781 kbits/in max
Track density 145 ktracks/in avg.
Areal density 114.4 Gbits/in
Spindle speed 7,200 RPM
Internal data transfer rate 1,030 Mbits/sec max)
Sustained data transfer rate OD 72 Mbytes/sec max
I/O data-transfer rate 100 Mbytes/sec max
ATA data-transfer modes supported PIO modes 0–4
Cache buffer 16 Mbytes
Height (max) 26.1 mm (1.028 inches)
Width (max) 101.6 mm (4.000 inches) +/- 0.010 inches
Length (max) 146.99 mm (5.787 inches)
Weight (max) 580 grams
Average latency 4.16 msec
Power-on to ready (max) 11 sec
Standby to ready (max) 15 sec
Track-to-track seek time (typical) <0.8 msec (read), <1.0 msec (write)
Average seek, read (typical) <11.0 msec
Average seek, write (typical) <12.0 msec
Startup current (typical) 12V (peak) 2.8 amps
Voltage tolerance (including noise) 5V ± 5%
Ambient temperature 0° to 60°C (operating)
Temperature gradient 20°C per hour max(operating)
Relative humidity 5% to 90% (operating)
Relative humidity gradient 30% per hour max
Wet bulb temperature 37.7°C max (operating)
Altitude, operating –60. 96 m to 3,048 m
Altitude, nonoperating
(below mean sea level, max)
Operational Shock 68 G at 2 msec
Non-Operational Shock 350 G at 2 msec
Multiword DMA modes 0–2
Ultra DMA modes 0–5
12V ± 10%
–40° to 70°C (nonoperating)
30°C per hour max (nonoperating)
5% to 95% (nonoperating)
37.7°C max (nonoperating)
(–200 ft. to 10,000+ ft.)
–60.96 m to 12,192 m
(–200 ft. to 40,000+ ft.)
2
avg
6 DiamondMax 21 PATA Product Manual, Rev. A
Drive specification STM3300620A
Vibration, operating 5–22 Hz: 0.25 G, Limited displacement
Vibration, nonoperating 5–22 Hz: 0.25 G, Limited displacement
Drive acoustics, sound power (Bels)
Idle** 2.5 (typical)
Quiet seek 3.0 (typical)
Nonrecoverable read errors 1 per 10
Annualized Failure Rate (AFR) 0.34%
Warranty 3 years on distribution units.
Contact start-stop cycles 50,000 at 25°C, 50% rel. humidity
22–350 Hz: 0.50 G
350–500 Hz:: 0.25 G
22–350 Hz: 5.0 G
350–500 Hz:: 1.0 G
2.8 (max)
3.1 (max)
14
bits read
To determine the warranty for a specific drive, use a web browser to
access the following web page:
www.seagate.com/support/service/
From this page, click on the “Verify Your Warranty” link. You will be
asked to provide the drive serial number, model number (or part
number) and country of purchase. The system will display the warranty information for your drive.
DiamondMax 21 PATA Product Manual, Rev. A 7
Table 3: Drive specifications summary for 250 Gbyte models
Drive specification STM3250820A STM3250620A
Formatted Gbytes (512 bytes/sector)* 250
Guaranteed sectors 488,397,168
Heads 3
Discs 2
Bytes per sector 512
Default sectors per track 63
Default read/write heads 16
Default cylinders 16,383
Recording density 813 kbits/in max
Track density 145 ktracks/in avg.
Areal density 114.4 Gbits/in
Spindle speed 7,200 RPM
Internal data transfer rate 1,030 Mbits/sec max
Sustained data transfer rate OD 72 Mbytes/sec max
I/O data-transfer rate 100 Mbytes/sec max
ATA data-transfer modes supported PIO modes 0–4
Cache buffer 8 Mbytes 16 Mbytes
Height (max) 26.1 mm (1.028 inches)
Width (max) 101.6 mm (4.000 inches) +/- 0.010 inches
Length (max) 146.99 mm (5.787 inches)
Weight (max) 580 grams
Average latency 4.16 msec
Power-on to ready (max) 11 sec
Standby to ready (max) 15 sec
Track-to-track seek time (typical) <0.8 msec (read), <1.0 msec (write)
Average seek, read (typical) <11.0 msec
Average seek, write (typical) <12.0 msec
Startup current (typical) 12V (peak) 2.8 amps
Voltage tolerance (including noise) 5V ± 5%
Ambient temperature 0° to 60°C (operating)
Temperature gradient 20°C per hour max (operating)
Relative humidity 5% to 90% (operating)
Relative humidity gradient 30% per hour max
Wet bulb temperature 37.7°C max (operating)
Altitude, operating –60. 96 m to 3,048 m
Altitude, nonoperating
(below mean sea level, max)
Operational Shock 68 G at 2 msec
Non-Operational Shock 350 G at 2 msec
Multiword DMA modes 0–2
Ultra DMA modes 0–5
12V ± 10%
–40° to 70°C (nonoperating)
30°C per hour max (nonoperating)
5% to 95% (nonoperating)
37.7°C max (nonoperating)
(–200 ft. to 10,000+ ft.)
–60.96 m to 12,192 m
(–200 ft. to 40,000+ ft.)
2
avg
8 DiamondMax 21 PATA Product Manual, Rev. A
Drive specification STM3250820A STM3250620A
Vibration, operating 5–22 Hz: 0.25 G, Limited displacement
Vibration, nonoperating 5–22 Hz: 0.25 G, Limited displacement
Drive acoustics, sound power (Bels)
Idle** 2.5 (typical)
Quiet seek 3.0 (typical)
Nonrecoverable read errors 1 per 10
Annualized Failure Rate (AFR) 0.34%
Warranty 3 years on distribution units.
Contact start-stop cycles (25°C, 50% rel. humidity) 50,000
22–350 Hz: 0.50 G
350–500 Hz:: 0.25 G
22–350 Hz: 5.0 G
350–500 Hz:: 1.0 G
2.8 (max)
3.1 (max)
14
bits read
To determine the warranty for a specific drive, use a web browser to
access the following web page:
www.seagate.com/support/service/
From this page, click on the “Verify Your Warranty” link. You will be asked
to provide the drive serial number, model number (or part number) and
country of purchase. The system will display the warranty information for
your drive.
DiamondMax 21 PATA Product Manual, Rev. A 9
Loading...