Maxtor GP-MF702 Application Note

Application Note:

Non-standard cameras working with Matrox Pulsar

Panasonic GP-MF702 November 16, 1995

Camera
Interface
Overview

Camera
Interface
Details

Cabling
Requirements

• RS-170 - 640 x 480 x 8 @ 30 fps

• TTL hsync and vsync

• Non-interlaced

• RS-170 - 640 x 480 x 8 @ 30 fps

• Non-interlaced

• Continuous video

• Camera sending TTL hsync and vsync data to Matrox Pulsar

• DCF used: GPMF702N.DCF

• IMG-7W2-TO-BNC (or IMG-7W2-TO-5BNC) and PLS-TTL-CABLE required

• Video input BNC of the IMG-7W2-TO-BNC (or IMG-7W2-TO-5BNC) cable should be

connected to Video Output Connector (BNC) of the camera

• Cable connections between the DB-37 connector of PLS-TTL-CABLE and the 12-pin

connector of the camera are as follows:

PLS-TLL-CABLE PANASONIC GP-MF702
(DB-37 connector) (12-pin connector)
Pin name Pin no.

GROUND 6 GROUND 1
GROUND 7 GROUND 1
TTL_VSYNC 11 VD IN/OUT 7
TTL_HSYNC 26 HD IN/OUT 6

• A load resistor of 75 Ω must be connected between VD and GROUND

• A load resistor of 75 Ω must be connected between HD and GROUND

Pin name Pin no.

Special
Considerations

IMPORTANT! The aforementioned load resistors must be connected in order to protect
Matrox Pulsar hardware

The DCF(s) mentioned in this application note can be found on the MIL and MIL-Lite CD, or our FTP site (ftp.matrox.com). The information furnished by
Matrox Electronics System, Ltd. is believed to be accurate and reliable. Please verify all interface connections with camera documentation or manual.
Contact your local sales representative or Matrox Sales office or Matrox Imaging Applications at 514-822-6061 for assistance.

CorporateCorporate
Headquarters:Headquarters:
Canada and U.S.A.Canada and U.S.A.
Matrox ElectronicMatrox Electronic
Systems Ltd.Systems Ltd.

1055 St.Regis Blvd.
Dorval, Quebec, Canada
H9P 2T4
Tel: [phone]
Fax: [phone]

Sales Offices:Sales Offices:
U.K.U.K.

Matrox (UK) Ltd.Matrox (UK) Ltd.

Sefton Park, Stoke Poges
Buckinghamshire
U.K. SL2 4JS
Tel: [phone]
Fax: [phone]
665599

FranceFrance
Matrox France SARLMatrox France SARL

2, rue de la Couture,
Silic 225
94528 Rungis Cedex
Tel: [phone]
Fax: [phone]

GermanyGermany
Matrox GmbHMatrox GmbH

Inselkammerstr.8
D-82008
Unterhaching
Germany
Tel: [phone]
Fax: [phone]

Asia PacificAsia Pacific
Matrox Asia LiaisonMatrox Asia Liaison
OfficeOffice

Rm. 1901, 19/F, Workington
Tower,
78 Bonham Strand E.,
Sheung Wan, Hong Kong.
Tel: [phone]
Fax: [phone]