Maxtor ATLAS 10K V specifications

Atlas® 10K V

ENTERPRISE

10,000 RPM ENTERPRISE­CLASS HARD DRIVE

EXCEPTIONAL CAPACITY
AND PERFORMANCE

• Industry’s leading capacity
10K RPM drive

• Seek time as fast as 4.0ms

hird-generation

• T
Ultra320 SCSI

• Maximum sustained data
rate up to 89MB/sec

• 8MB cache (ECC protected)

EXTRAORDINARY VALUE

• Ease of integration

• MaxAdapt

• Double the capacity of

®

15K RPM drives (per platter)

• SCSI investment protection

SUPERIOR RELIABILITY

• Designed for 1.4 million
hours MTTF*

• 24x7 dependability

• Proven Atlas family
architecture and firmware

• Shock Protection System

ULTRA320 SCSI HARD DRIVE

73GB 147GB 300GB

Reliability and capacity: the first 3.5" 10K RPM enterprise

hard disk drive designed for 1.4 million hours MTTF*

reliability with the highest capacity for mainstream

high-bandwidth applications

The Atlas 10K V Advantage

The Atlas 10K V SCSI drive is an extremely reliable 10K RPM hard

disk drive, designed for 1.4 million hours MTTF*, up to 300GB capacity,

as fast as 4.0ms average seek time and an 89MB/sec sustained data

transfer rate. Maxtor’s intelligent drive technology, MaxAdapt, allows the

Atlas 10K V drive to adapt to almost any system designs and conditions

for ease of integration and maintains peak performance.

Maxtor MaxAdapt technology
offers the following key features:

Intelligent MaxAdapt features

• Adaptive Bias Estimation (ABE)—
Maintains consistent performance
by adjusting the bias applied
to the actuator

• Virtual Cache Lines (VCL)—
Allows dynamic assignment
of cache segments

• Adaptive Active Filtering (AAF)—
Improves signal integrity

• Rotational Vibration Compensation
(RVC)—Monitors and corrects for
external vibration

Reliability

• Improved S.M.A.R.T. and
self-diagnostics

• State-of-the-art manufacturing
test processes

• Multiple temperature tests

Performance

• Anticipatory read and write streams—
Minimizing hardware latency

• Opportunistic pre-fetch
Uses latency between commands to
read ahead, improving performance

• Auto Read mode
Improves random and multiple
sequential stream performance

Best-fit enterprise applications

• Multi-stream audio and video

• RAID applications

• SAN environments

• NAS environments

• Data warehousing

• Digital cinema

• E-mail servers

• Enterprise servers

—

—

• Thermal sensor

• S.M.A.R.T. features

• RoHS Compliant

SPECIFICATIONS

73.5 147.1 300

Formatted Capacity (GB) 73.5 147.1 300

Bytes per Sector 512, 516, 518,
520, 522, 524

Interface Ultra320 SCSI
(Backwards compatible with
Ultra160, Ultra2, UltraSCSI)

Interface Connectors 68-pin WIDE; 80-pin SCA-2

Disk Drive Configuration

Disks 1 2 4

Heads 2 4 8

Performance Specifications

Seek Time

Average Read/Write (ms) 4.0/4.5 4.2/4.7 4.4/4.9

Track-to-Track Read/Write (ms) 0.3/0.5

Full Stroke Read/Write (ms) 11.0/12.0

Spindle Speed (RPM) 10,000

Average Rotational Latency (ms) 3

Transfer Rate

SCSI Maximum Burst (MB/s) 320

SCSI Maximum Host (MB/s) 270

Maximum Sustained (MB/sec) 89

Cache (MBytes) 8

Reliability Specifications

Contact Start Stop (CSS) 50,000

Data Error Rate per Bits Read

12

Recoverable <10 per 10

Nonrecoverable <1 per 10

15

Limited warranty (years) 5

73.5 147.1 300

Environmental Specifications

Operating

Temperature (°C) 5 to 55

Maximum Case Temperature (°C) 60

Non-Condensing Humidity (%) 5 to 95

Shock 2 ms (G) R/W 63/30

2

Rotational Shock (rad/sec

) 7,000

Vibration 5-500 Hz (G) 1.5

Rotational Vibration (rad/sec

2

) 25

Altitude (feet) -1,000 to 10,000

Acoustics, Idle (bels) 3.6 3.6 3.8

Non-Operating

Temperature (°C) -40 to 70

Non-Condensing Humidity (%) 5 to 95

Shock 2 msec (G) 250

Rotational Shock (rad/sec2) 25,000

Vibration 5-500 Hz (G) 2

Altitude (feet) -1,000 to 40,000

Power Specifications

Voltage Requirements 5V

+/- 5% 12V +/- 5%

Idle Power (W) 8.0 8.5 10.8

Physical Dimensions

Width max (inches/mm) 4/101.6

Length max (inches/mm)

Height max (inches/mm)

5.787/147.0

1.028/26.1

Weight max (lb/kg) 1.8/0.82

ORDER INFORMATION

Model Number RoHS Model Number Capacity Interface Connector

8D073L0 8J073L0 73.5GB Ultra320 68-pin Wide LVD
8D073J0 8J073J0 73.5GB Ultra320 80-pin SCA-2
8D147L0 8J147L0 147.1GB Ultra320 68-pin Wide LVD
8D147J0 8J147J0 147.1GB Ultra320 80-pin SCA-2
8D300L0 8J300L0 300GB Ultra320 68-pin Wide LVD
8D300J0 8J300J0 300GB Ultra320 80-pin SCA-2

For support or information, call us at 1-800-2Maxtor or visit us at www.maxtor.com

All Maxtor products are backed by our leading service and support staff.

Service includes:

• Advance replacement in two business days

• 24-hour on-line troubleshooting tools and email

• Telephone support representatives available Monday-Friday during
business hours (except holidays)

For purposes of measuring drive capacity, a megabyte (MB) means 1,000,000 bytes, a gigabyte (GB) means 1,000,000,000 bytes. Total accessible capacity varies
depending on operating environment. Seek times are at nominal conditions and include settling. Specifications subject to change without notice.
* MTTF refers to the estimated mean time to failure based upon a statistical sample.

©2004 Maxtor Corporation. Maxtor, Atlas, MaxAdapt, What drives you and the Maxtor stylized logo are registered trademarks of Maxtor Corporation.
Shock Protection System is a trademark of Maxtor Corporation. Maxtor Corporation, 500 McCarthy Boulevard, Milpitas, CA, 95035. DS-Atlas10KV-3/06-CL.

To speak with a Maxtor product support representative in the U.S. and Canada,
call 1-800-2MAXTOR, Mon.-Fri. from 7 a.m. to 4 p.m. (PST).

In Europe, call [phone] Mon.-Thur. from 8:30 a.m. to 5 p.m. (GMT)
and Fri. 8:30 a.m. to 4 p.m. (GMT).

In Australia, call [phone]. In Japan, call 005316-53616,
and in Singapore, call 65-6852-0220 or 1-800-481-6788.