Maxtec BlenderBuddy 2 Instructions Manual

BlenderBuddy 2

Operating Manual & Instructions For Use

R233M01 REV. B

ENGLISH

Maxtec
2305 South 1070 West
Salt Lake City, Utah 84119
USA

AUTHORIZED REPRESENTATIVE:

TEL [phone]
FAX [phone]
www.maxtec.com
E-mail: [e-mail]

EC REP

For the most current manual revision please visit our website: www.maxtec.com

QNET BV
Kantstraat 19
NL-5076 NP Haaren
The Netherlands

WARRANTY

Under normal operating conditions, Maxtec warrants the BlenderBuddy 2 to be free from defects of
workmanship or materials for two (2) years from receipt. Warranty does not cover breakage/abuse.

These warranties are from the date of receipt, provided that the product is properly operated and
maintained in accordance with Maxtec's operating instructions. Based on Maxtec product evaluation,
Maxtec's sole obligation under foregoing warranty is limited to making replacements, repairs, or issu­ing credit for equipment found to be defective. This warranty extends only to the buyer purchasing
the equipment directly from Maxtec or through Maxtec's designated distributors and agents as new
equipment. Routine maintenance items, such as O-rings, are excluded from warranty. Maxtec and any
other subsidiaries shall not be liable to the purchaser or other persons for incidental or consequential
damages or equipment that has been subject to abuse, misuse, mis-application, alteration, negligence
or accident. These warranties are exclusive and in lieu of all other warranties, expressed or implied,
including warranty of merchantability and fitness for a particular purpose.

For product warranty returns, please contact Maxtec Customer Service for a Return Material
Authorization (RMA).

866.4.MAXTEC WWW.MAXTEC.COMii

TABLE OF CONTENTS

WARRANTY ...................................................................................II

DESCRIPTION .................................................................................1

INTENDED USE ............................................................................... 1

WARNINGS ! ..............................................................................1

1.0 INSTALLATION/OPERATION INSTRUCTIONS ................... 3

2.0 FLOWMETER OPERATION ................................................... 4

3.0 CLEANING & MAINTENANCE .............................................. 4

3.1 Cleaning ............................................................................................4

3.2 Maintenance ...................................................................................4

4.0 SPECIFICATIONS .................................................................. 4

4.1 Symbol Guide .................................................................................5

866.4.MAXTEC WWW.MAXTEC.COMiii