User Manual SD170E Series
Page 2
English
Safety Information
WARNING
¾ NEVER connect the transceiver to an AC outlet. This may pose a fire hazard or result in an
electric shock.
¾ NEVER operate the radio transmitter without a suitable artificial load or antenna connected
¾ DO NOT allows children to operate transmitter-equipped radio equipment.
CAUTION
¾ DO NOT operates the transceiver near unshielded electrical blasting caps or in an explosive
atmosphere unless it is a type especially designed and qualified for such use.
¾ NEVER modify a transceiver or accessory except as instructed in the service manual,
engineering bulletins or formal communication as this may invalidate any warranty, guarantee
or type approval.
¾ NEVER use the transceiver in an aircraft.
¾ NEVER use the transceiver near to sensitive medical equipment or in areas where instructed
not to do so, e.g. Petrol filling stations.
¾ NEVER mount the transceiver unit on or near the Airbag or Airbag activation device.
¾ NEVER use an accessory not recommended or supplied by Maxon may cause damage to
equipment or injury to personnel, and will invalidate warranty.
¾ DO NOT use or place the transceiver in areas with temperatures below -30°C or above
+60°C, In areas subject to direct sunlight, such as the dashboard.
¾ AVOID placing the transceiver in excessively dusty environments.
¾ DO NOT fit the transceiver in such a manner that the antenna is next to, or touching,
exposed parts of the body, especially the face or eyes, while transmitting.
¾ ALWAYS Install the SD170E using a suitable heat sinking surface.
¾ NEVER operate the radio transmitter without a suitable artificial load or antenna connected.
¾ ALWAYS Secure locking nuts on DB09 connector and always disconnect power supply before
removing D-type connector.
For service or repair always return your radio to an authorised Maxon Dealer or warranty
conditions will be invalid.