GB
Operating elements
1
Battery compartment
2
Alarm dial knob
3
Alarm ON/OFF switch
4
Snooze/light button
5
M.SET button
6
REC button
7
RESET button
8
Alarm indictor
Red: alarm on
Green: alarm off
9
LCD
How to start
Battery insertion/replacement
To install and replace the battery, please follow these steps:
1. Pull down the battery 1 compartment (at the back of the
case).
2. Insert one new battery (AA type, 1.5V, LR6), observing correct
polarity as indicated in the battery compartment.
3. Put lid
1
back again.
Setting the clock automatically
Once the battery is installed properly, the clock automatically
sets itself to 12 O’clock with the temperature in Celsius displayed
on the LCD and then receiving the signal. Once it has received
the DCF signal and processed it accordingly (which takes 3 to
maximum 12 minutes), the clock automatically displays the correct time. We recommend that you do not put up or hang up the
clock anywhere during this process.
If the clock still has not set itself after 12 minutes, reception is
faulty or not possible at the chosen location. Repeat setting at a
different location by pressing the RESET button
7
.
Alarm functions
Set alarm time
Turn the set-alarm knob
2
in the direction of the arrow in order
to set the alarm time. Never turn the set-alarm knob in the opposite direction since this could damage the works.
Switch on alarm
Push the alarm ON/OFF switch
3
upwards. The red dot is dis-
played on the dial near the 3 o’clock position. At the set alarm
time, the alarm sounds for maximum 2 minutes if the alarm ON/
OFF switch
3
is still upwards (i.e. at the ON position) or the top
4
button is not pressed.
Interrupt alarm (snooze)
Press the snooze button on the top
4
of the alarm clock, the light
turns on for 3 seconds. The alarm stops for 5 minutes and then
sounds again. The snooze function can be repeated 3 - 7 times.
Automatic switch-off
If the alarm is not interrupted or switched off, it stops automatically after approx. 2 minutes. It is reactivated 12 hours later at the
same time.
Switch off alarm
When the alarm is activated, push the alarm ON/OFF switch
3
downwards, the green dot
8
is displayed on the dial near the
3o’clock position and the alarm stops.
Item No.: 0950 543
6
4
7
5
2
1
3
9
8
8
Radio controlled alarm clock with LCD
Operating Instruction
Technical changes are subject to our approval. For our terms of delivery and payment please go to www.beco-professionals.com.
Reg. oce: 21500 Geesthacht · Register Court: Lübeck HRB 314 GE · Managing Directors: Jürgen Birkenstock, Marek Birkenstock · VAT-Number: DE 135283788 · ILN 40 22739 00000 3 · WEEE-Reg.-Nr.: DE12990100
BIRKENSTOCK & CO. GMBH · 21500 Geesthacht · Germany · k +49 4152 809680 · +49 4152 809696 · www.beco-professionals.com
Distributed by:
1 / 2
GB
Illumination
To be able to read the face of your alarm clock even when it is
dark, briefly press the button 4 on the top of the alarm clock.
The illumination function is activated for 3 seconds.
Setting the time
To set the time manually
Press and hold the M.SET
5
button for 3 seconds to set the time:
1. Press the M.SET button for 1 second to advance 1 minute
2. Press the M.SET button for more than 1 second to auto advance the minute hand.
3. If the M.SET button is not pressed for 8 seconds, the clock is set.
How to set the LCD
9
display content
If the radio signal is received, it can display the calendar, second
and the temperature.
Press the M.SET button
5
to switch the LCD display among tem-
perature, second and calendar.
In calendar display, press the REC button
6
to switch the calen-
dar display format between date/month and month/date.
In temperature display, press the REC button
6
to the tempera-
ture display format between °C and °F.
Remark: If the radio signal has not been received, LCD displays
temperature or second only. Press the M.SET button
5
to switch
the LCD display between temperature and second.
Receiving the radio control signal
The radio-controlled clock will automatically receive the radio
signal 12 times every day. It will take 3-12 minutes to receive the
radio signal.
During force DCF reception by pressing the REC button
6
for
3 seconds, the clock will go to 12 o’clock and start receiving the
radio signal for 3 - 12 minutes. Once it has received the DCF signal and processed it accordingly, the clock automatically displays
the correct time. It the clock still has not set itself after 12 minutes, reception is faulty and it will resume the time before the
force reception.
This item complies with all the required European standards.
Radio controlled alarm clock with LCD
Operating Instruction
Technical changes are subject to our approval. For our terms of delivery and payment please go to www.beco-professionals.com.
Reg. oce: 21500 Geesthacht · Register Court: Lübeck HRB 314 GE · Managing Directors: Jürgen Birkenstock, Marek Birkenstock · VAT-Number: DE 135283788 · ILN 40 22739 00000 3 · WEEE-Reg.-Nr.: DE12990100
BIRKENSTOCK & CO. GMBH · 21500 Geesthacht · Germany · k +49 4152 809680 · +49 4152 809696 · www.beco-professionals.com
Distributed by:
2 / 2
Loading...