Maxi-Signal Products 250 DC STEADY BURN LED STATUS LIGHTS Catalog Page

250 DC STEADY BURN LED STATUS LIGHTS

250 DC OVERHEAD CRANE STATUS LIGHT

Using Heavy Duty Steady Burn LED male thread LED lights designed for
250 DC overhead cranes, it's possible to provide long life trouble free
status lights for this rough application. Choose from a two light system
up to four lights in any combination of Red, Green, Amber or Blue Steady
Burn LEDs mounted on a NEMA 3R enclosure, completely raintight.

The 250 DC Steady Burn 1/2" Male Thread LED is available as a separate
unit, just order part number 250-SB-MT in one of the colors shown
above.
Enclosure rated at NEMA 3R, completely raintight.

SPECIFICATIONS

• 250 DC circuitry designed to withstand overvoltage
conditions and excessive vibration.

• Current draw: .017 to .021 amps.

• Voltage Range: 250 to 270 DC.

• Size: 4 light NEMA 3R box = 4" X 4" X 24"
3 light NEMA 3R box = 4" X 4" X 12"
2 light NEMA 3R box = 4" X 4" X 12"
250-SB-MT LED = 2 3/4" dia. X 6 3/8" high

• Ambient temperature -25C to +85C

250-4/R/A/G/B 4 Light 250 DC LED Status Light - R, A, G, B
250-3/R/A/G 3 Light 250 DC LED Status Light, - R, A, G
250-2/R/G 2 Light 250 DC LED Status Light, - R, G
250-SB-MT 250 DC Steady Burn LED Light - 1/2" Male Thread.

Specify lens color - Red, Green, Amber or Blue.

250 DC STEADY BURN MEDIUM BASE LED

Replace fragile incandescent medium base bulbs with a long life
vibration resistant LED Steady Burn light suitable for 250 DC overhead
crane applications. Available in Red, Green, Amber or Blue lens colors.

SPECIFICATIONS

• 250 DC circuitry designed to withstand overvoltage conditions and
excessive vibration.

• Current draw: .017 to .021 amps.

• Voltage range: 250 to 270 DC.

• Size: 2 3/4" dia. X 6 3/4" high.

• Ambient temperature -25C to +85C

250-SB-MSB 250 DC Steady Burn Medium Base LED Light.
Specify Lens Color - Red, Green, Amber or Blue.

LINTERN RETRO FIT ASSEMBLY

Retro fit the model 250-SB-MSB Steady Burn LED to a Lintern Incandes­cent Fixture as easy as 1, 2, 3:

1. Remove Lintern Lens, but keep hardware. (screws & springs)

2. Attach the Lexan Plastic Dust Barrier to the top of the aluminum O ring
with existing screws & springs.

3. Screw-in the medium base LED and thats it!

The result is a new Steady Burn LED light complete with a Dust Barrier.

250-SB-MSB-DB 250 DC Steady Burn Medium Base LED Light
including Dust Barrier. Specify Lens Color.

29