MaxiMist TNT HVLP ST687 Instructions Manual
US
MaxiMist™
Evolution TNT HVLP ST687
Spray Tanning System
With “Twist N Tan” Spray Gun
Instruction Manual and Users Guide
Evolution HVLP ST687 TNT
Contents
1. Explanation of symbols used .....................................................1
2. Field of application ..............................................................1
3. Important Safety Instructions ....................................................1
4. Processable materials ............................................................4
5. Non-processable materials .......................................................4
6. Preparation of the spray area .....................................................5
7. General preparations before the application of spray tanning solution .............5
8. Preparation of the skin ...........................................................5
9. Start-up .........................................................................5
10. Operation ......................................................................6
11. Tips on using the spray tanning system ..........................................7
12. After application of the spray tanning solution ..................................8
13. Cleaning the spray tanning system ..............................................8
14. Maintenance .................................................................10
15. Storage ...................................................................... 10
16. Spare parts .................................................................. 10
17. Correction of Malfunctions ....................................................12
1
Evolution HVLP ST687 TNT
US
Congratulations on purchasing a MaxiMist™ Spray Tanning System. This product has been
specially designed to provide an ecient application of tanning solution products.
Take a minute to read and understand how to operate your new MaxiMist™ system and
you will be able to provide the perfect tan with every application.
Read all safety information before operating the equipment. Save
these instructions.
1. Explanation of symbols used
Indicates a hazardous situation which, if not avoided, could result
in death or serious injury.
i
Indicates tips for use and other particularly useful information.
2. Field of application
The MAXIMIST™ Spray Tanning System has been specically developed for the professional
application of liquid spray tanning solution. Any application other than that described in
this operating manual is not permitted.
3. Important Safety Instructions
To reduce the risks of re or explosion, electrical shock and the
injury to persons, read and understand all instructions included in
this manual. Be familiar with the controls and proper usage of the
equipment.
•
DO NOT use the spray guns to spray ammable substances.
•
DO NOT clean spray guns with ammable solvents.
•
There must be no sources of ignition such as open res, smoke of lit cigarettes, cigars and
tobacco pipes, sparks, glowing wires, hot surfaces, etc. in the vicinity during spraying.
•
Caution against dangers that can arise from the sprayed substance and observe the
text and information on the containers or the specications given by the substance
manufacturer directly or via a SDS (Safety Data Sheet).
•
DO NOT spray any liquid of unknown hazard potential.
•
ATTENTION! Spray tanning solutions do not generally oer any protection against
sunburn. Repeated unprotected contact with the sun increases the risk of skin cancer,
skin aging and other harmful eects.
•
This Spray Tanning System is intended for use by persons 14 years and over.
2
Evolution HVLP ST687 TNT
US
•
DO NOT let children play with the Spray Tanning System.
•
NEVER leave spray tanning system unattended.
•
Stay alert and watch what you are doing.
•
DO NOT operate the unit when fatigued or under the inuence of drugs or alcohol.
•
Follow all appropriate local, state, and national codes governing ventilation, re
prevention, and operation.
•
The United States Government Safety Standards have been adopted under the
Occupational Safety and Health Act (OSHA). These standards, particularly part 1910
of the General Standards and part 1926 of the Construction Standards should be
consulted.
•
NEVER direct the spray gun at animals.
•
Ensure that the spray area is well ventilated.
•
DO NOT breathe in spray tanning solution. Wearing nasal plugs and operating an
extraction fan designed for the purpose is recommended.
•
DO NOT spray into the eyes.
•
If spray tanning solution is sprayed into the eyes, wash them out with water
immediately and consult a doctor.
•
DO NOT spray spray tanning solution into open wounds or onto damaged skin.
•
Cover your hair when spraying your face. Otherwise bleached hair in particular could
be stained by the spray tanning solution.
•
NEVER immerse the Spray Tanning System into water.
•
WARNING! NEVER use your Spray Tanning System near bath tubs, shower
trays or other receptacles that contain water.
•
NEVER place the Spray Tanning System near a washbasin or another water source.
Water always represents a hazard even when the system is switched o.
•
NEVER expose the equipment to rain.
•
DO NOT use outdoors or operate where aerosol (spray) products are being used.
•
NEVER drop or insert any object into any opening or hose.
•
NEVER block air openings of the spray turbine.
•
Keep electrical cord plug and spray gun trigger free from liquids.
NEVER hold the cord at plug connections to support the cord. Failure to observe may
result in an electrical shock.
•
Keep cord away from heated surfaces.
•
NEVER operate spray tanning system if cord or plug is damaged.
•
As additional protection, the installation of a circuit protective device such as ALCI or
GFCI is recommended. Ask your installer for advice.
•
Connect to a grounded outlet and use grounded extension cords.
•
DO NOT use a 3 to 2 adapter.
•
Unplug turbine before cleaning any parts.
•
Use only manufacturer authorized parts. User assumes all risks and liabilities when
using parts that do not meet the minimum specications and safety devices of the
turbine manufacturer.
3
Evolution HVLP ST687 TNT
US
•
NEVER open the Spray Tanning System yourself to carry out electrical repairs!
•
DO NOT place the spray gun on its side, as material could leak out.
Grounding Instructions
This product must be grounded. In the event of an electrical short circuit, grounding
reduces the risk of electric shock by providing an escape wire for the electric current. This
product is equipped with a cord having a grounding wire with an appropriate grounding
plug. The plug must be plugged into an outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
WARNING Improper installation of the grounding plug can result in a
risk of electric shock.
If repair or replacement of the cord or plug is necessary, do not connect the green grounding wire
to either at blade terminal. The wire with insulation having a green outer surface with or without
yellow stripes is the grounding wire and must be connected to the grounding pin.
Check with a qualied electrician or serviceman if the grounding instructions are not
completely understood, or if you are in doubt as to whether the product is properly
grounded. Do not modify the plug provided. If the plug will not t the outlet, have the
proper outlet installed by a qualied electrician.
This product is for use on a nominal 120 volt ac circuit and has a grounding plug that looks
like the plug illustrated below. Make sure that the product is connected to an outlet having
the same conguration as the plug. No adapter shall be used with this product.
Grounded Outlet
Grounding Pin
Cover for grounded outlet box
Important Electrical Information
Use only a 3-wire extension cord that has a 3-blade grounding plug and a 3-slot receptacle
that will accept the plug on the product. Make sure your extension cord is in good condition.
When using an extension cord, be sure to use one heavy enough to carry the current your
product will draw. An undersized cord will cause a drop in line voltage resulting in loss of
power and overheating. A SJT type cord is required. Cord shall be 14 AWG minimum for
general indoor use.
SAVE THESE INSTRUCTIONS
Loading...