Maxim Integrated Producs DG442AK, DG441DY, DG441DK, DG441DJ, DG441CY Datasheet

19-4611; Rev 2; 7/96

Improved, Quad, SPST Analog Switches

_______________General Description

Maxim’s redesigned DG441/DG442 analog switches now
feature on-resistance matching (4Ω max) between
switches and guaranteed on-resistance flatness over the
signal range (9Ω max). These low on-resistance switches
conduct equally well in either direction. They guarantee
low charge injection (10pC max), low power consumption
(1.65mW), and an ESD tolerance of 2000V minimum per
Method 3015.7. The new design offers lower off-leakage
current over temperature (less than 5nA at +85°C).

The DG441/DG442 are quad, single-pole/single-throw
(SPST) analog switches. The DG441 has four normally
closed switches, and the DG442 has four normally open
switches. Switching times are less than 250ns for tONand
less than 70ns for t

. These devices operate from a sin-

OFF

gle +10V to +30V supply, or bipolar ±4.5V to ±20V sup­plies. Maxim’s improved DG441/DG442 continue to be
fabricated with a 44V silicon-gate process.

________________________Applications

Sample-and-Hold Circuits PBX, PABX
Communication Systems Guidance and Control Systems
Test Equipment Audio-Signal Routing
Battery-Operated Systems Military Radios
Heads-Up Displays Modems
Fax Machines

______________________New Features

♦ Plug-In Upgrades for Industry-Standard DG441/DG442
♦ Improved rDS(ON) Match Between Channels(4Ωmax)
♦ Guaranteed r

FLAT(ON)

Over Signal Range (9Ωmax)

♦ Improved Charge Injection (10pC max)
♦ Improved Off-Leakage Current Over Temperature

(<5nA at +85°C)

♦ Withstand Electrostatic Discharge (2000V min)

per Method 3015.7

__________________Existing Features

♦ Low r
♦ Single-Supply Operation +10V to +30V

Bipolar-Supply Operation ±4.5V to ±20V

♦ Low Power Consumption (1.65mW max)
♦ Rail-to-Rail Signal Handling
♦ TTL/CMOS-Logic Compatible

DS(ON)

(85Ω max)

______________Ordering Information

PART TEMP. RANGE PIN-PACKAGE

DG441CJ

DG441CY 0°C to +70°C 16 Narrow SO
DG441C/D 0°C to +70°C Dice*
DG441DJ -40°C to +85°C 16 Plastic DIP
DG441DY -40°C to +85°C 16 Narrow SO
DG441DK -40°C to +85°C 16 CERDIP
DG441AK

Ordering Information continued on last page.

*

Contact factory for dice specifications.

**

Contact factory for availability and processing to MIL-STD-883B.

0°C to +70°C 16 Plastic DIP

-55°C to +125°C 16 CERDIP**

DG441/DG442

_____________________Pin Configurations/Functional Diagrams/Truth Tables

TOP VIEW

1

IN1

GND

IN4

D1
S1

S4
D4

2
3

V-

4
5
6
7
8

DG441

DIP/SO DIP/SO

DG441

LOGIC SWITCH

0
1

16

IN2
D2

15

S2

14
13

V+
N.C.

12
11

S3

10

D3

9

IN3

ON

OFF

SWITCHES SHOWN FOR LOGIC “0” INPUT

_______________________________________________________________________________________ 1

IN1

GND

IN4

D1
S1

S4
D4

1
2
3

V-

4
5
6
7
8

DG442

DG442

LOGIC SWITCH

0
1

OFF

ON

16
15
14
13
12
11
10

IN2
D2
S2
V+
N.C.
S3
D3

9

IN3

N.C. = Not Internally Connected

For free samples & the latest literature: http://www.maxim-ic.com, or phone [phone]

Improved, Quad, SPST Analog Switches

ABSOLUTE MAXIMUM RATINGS

Voltage Referenced to V-

V+.........................................................................................44V

GND .....................................................................................25V

...................................................(GND - 0.3V) to (V+ + 0.3V)

V

L

Digital Inputs, V

, VD (Note 1)......(V- - 2V) to (V+ + 2V) or 30mA

S

(whichever occurs first)

Continuous Current (any terminal)......................................30mA

Peak Current, S or D

(pulsed at 1ms, 10% duty-cycle max).................................100mA

Continuous Power Dissipation (T

Plastic DIP (derate 10.53mW/°C above +70°C) ............842mW

Narrow SO (derate 8.70mW/°C above +70°C) ..............696mW

CERDIP (derate 10.00mW/°C above +70°C).................800mW

Operating Temperature Ranges

DG441C/DG442C.................................................0°C to +70°C

DG441D/DG442D..............................................-40°C to +85°C

DG441AK/DG442AK .......................................-65°C to +150°C

Storage Temperature Range.............................-65°C to +150°C

Lead Temperature (soldering, 10sec).............................+300°C

Note 1: Signals on S, D, or IN exceeding V+ or V- are clamped by internal diodes. Limit forward current to maximum current ratings.

Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and

DG441/DG442

functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied.
Exposure to absolute maximum rating conditions for extended periods may affect device reliability.

ELECTRICAL CHARACTERISTICS—Dual Supplies

(V+ = 15V, V- = -15V, GND = 0V, V

SWITCH

Analog-Signal Range

Drain-Source On-Resistance

On-Resistance Match
Between Channels (Note 4)

On-Resistance Flatness
(Note 4)

Source Off-Leakage Current
(Note 5)

Drain Off-Leakage Current
(Note 5)

Drain On-Leakage Current
(Note 5)

DIGITAL

Input Current with
Input Voltage High

Input Current with
Input Voltage Low

= 2.4V, V

INH

SYMBOLPARAMETER

ANALOG

r

DS(ON)

∆r

DS(ON)

r

FLAT(ON)

I

S(OFF)

I

D(OFF)

I

D(ON)

or

I

S(ON)

INH

INL

= 0.8V, TA= T

INL

MIN

CONDITIONS

(Note 3)
V+ = 13.5V, V- = -13.5V,

IS= -10mA,
VD= 8.5V or -8.5V

V+ = 15V, V- = -15V,
VD= ±10V,
IS= -10mA

V+ = 15V, V- = -15V,
VD= 5V or -5V,
IS= -10mA

V+ = 16.5V, V- = -16.5V,

±

VD= 15.5V,
VS= ±15.5V

V+ = 16.5V, V- = -16.5V,

±

VD= 15.5V,
VS= ±15.5V

V+ = 16.5V, V- = -16.5V,
VD= ±15.5V,
VS= ±15.5V

VIN= 2.4V

VIN= 0.8V

to T

, unless otherwise noted.)

MAX

TA= +25°C
TA= T

MIN

to T
TA= +25°C
TA= T

MIN

to T
TA= +25°C
TA= T

MIN

to T
TA= +25°C

MAX

C, D
A

TA= T

TA= +25°C

TA= T

C, D

MAX

TA= +25°C

TA= T

MAX

A -20 20

MAX

MAX

MAX

= +70°C)

A

MIN TYP MAX

(Note 2)

50 85

100

4
5
9

15

-0.50 0.01 0.50

-5 5

-20 20

-.0.50 0.01 0.50

-5 5

-20 20A

-0.50 0.08 0.50

-10 10C, D

UNITS

V-15 15V

Ω

Ω

Ω

nA

nA

nA

nA-500 0.01 500I

nA-500 0.01 500I

2 _______________________________________________________________________________________

Improved, Quad, SPST Analog Switches

ELECTRICAL CHARACTERISTICS—Dual Supplies (continued)

(V+ = 15V, V- = -15V, GND = 0V, V

SYMBOLPARAMETER

SUPPLY

Ground Current

DYNAMIC

Turn-On Time
Turn-Off Time ns

Off-Isolation Rejection
Ratio (Note 6)

Crosstalk (Note 7) dB-100
Source Off-Capacitance

Drain Off-Capacitance pF4
Drain On-Capacitance pF

C

= 2.4V, V

INH

All channels on or off, V+ = 16.5V, V- = -16.5V,
VIN= 0V or 5V

All channels on or off,

I-Negative Supply Current

GND

ON

t

OFF

QCharge Injection (Note 3) pC510

OIRR

S(OFF)
D(OFF)

D(ON)

V+ = 16.5V, V- = -16.5V,
VIN= 0V or 5V

All channels on or off, V+ = 16.5V, V- = -16.5V,
VIN= 0V or 5V

VS= ±10V, RL= 1kΩ, Figure 2t

DG442, VD= ±10V, Figure 2
CL= 1nF, V

R

GEN

RL= 50Ω, CL= 5pF,
f = 1MHz, Figure 4

RL= 50Ω, CL= 5pF,
f = 1MHz, Figure 5

f = 1MHz, Figure 6C

f = 1MHz, Figure 6C

= 0.8V, TA= T

INL

= 0V,

GEN

= 0Ω, Figure 3

to T

MIN

CONDITIONS

, unless otherwise noted.)

MAX

TA= +25°C

TA= T

TA= +25°C
T

A

TA= +25°C
TA= +25°C

TA= +25°C

TA= +25°C
TA= +25°C

TA= +25°Cf = 1MHz, Figure 6
TA= +25°C

to T

MIN

MAX

= +25°CDG441, VD= ±10V, Figure 2

MIN TYP MAX

(Note 2)

-1 -0.0001 1

-5 5

150 250

90 120

110 170

4

16

DG441/DG442

UNITS

V±4.5 ±20.0V+, V-Power-Supply Range

µA15 100I+Positive Supply Current

µA

µA-100 -15I

ns

dB60

pF

_______________________________________________________________________________________ 3