Maxim Integrated 71M6513H User Manual
71M6513/71M6513H Demo Board
QUICK START GUIDE
Getting Started
The TERIDIAN Semiconductor Corporation (TSC) 71M6513/71M6513H Demo Board is a demonstration board for
evaluating the 71M6513/71M6513H device for 3-phase electronic energy metering applications. It incorporates a
71M6513 or 71M6513H integrated circuit, peripheral circuitry such as a serial EEPROM, emulator port, and on-board
power supply as well as a companion Debug Board that allows a connection to a PC through a RS232 port. The
demo board allows the evaluation of the 71M6513 or 71M6513H power meter controller chip for measurement
accuracy and overall system use.
The Demo Board is pre-loaded with demo code in the FLASH memory of the 71M6513/71M6513H IC. This
embedded application is developed to exercise all low-level functions to directly manage the IC and the peripherals
on the PCB.
Downloading of any other TSC or custom application can be done through the emulator (ICE) port or using the Flash
Programmer Module (TFP-1).
Safety and ESD Notes
Connecting live voltages to the demo board system will result in potentially hazardous voltages on the demo board.
EXTREME CAUTION SHOULD BE TAKEN WHEN HANDLING THE DEMO
BOARD ONCE IT IS CONNECTED TO LIVE VOLTAGES!
THIS DEMO SYSTEM IS ESD SENSITIVE! ESD PRECAUTIONS SHOULD BE
TAKEN WHEN HANDLING THE DEMO BOARD!
Demo Board Kit Contents
• 71M6513/71M6513H Demo board containing one 71M6513 or 71M6513H IC with pre-loaded demo
program (circular PCB)
• Debug Board (rectangular PCB) for serial port access to the Demo Board
• 2 x 5VDC/1,000mA universal voltage wall transformer w/ 2.5mm plug (Switchcraft 712A compatible)
• Serial cable, DB9, Male/Female, 2m (Digikey AE1020-ND or AE1379-ND)
• CD-ROM containing the 71M6513/71M6513H data sheet, the Demo Board User’s Guide, the Software
User’s Guide, the Demo Code object and source files, and other Documentation and Utilities
Note: The CD-ROM contains a file named readme.txt that specifies all files found on the media and their purpose.
Revision 1.7 1 of 2
© Copyright 2004-2006 TERIDIAN Semiconductor Corporation
71M6513/71M6513H Quick Start Guide
Demo Board Test Setup
The file DBUM6513 V3-1.pdf is a document containing detailed instructions on how to set up and use the Demo
Board. This document should be carefully read
The figure below shows the basic connections of the Demo Board plus Debug Board with the external equipment.
Debug
Board
Host PC
and understood before attempting to use the Demo Board.
Power
Demo Board
Power Supply
(100 to 240VAC,
1ADC Output)
Power
Using the Demo Board
The Demo Board is a ready-to-run meter with a Kh of 3.2 Wh/pulse (if used with a CT with a 2,000:1 winding ratio).
The Demo Board has been tested on a meter calibration system, but it has not been calibrated
Demo Board User’s Manual for further details on how to use the Demo Board.
. Please refer to the
Documentation
All data sheets, user’s manuals and user’s guides are in electronic form, i.e. on the media supplied with this kit. The
TERIDIAN Semiconductor web site should be checked frequently for updates.
Software/Utilities
Demo Code, source files, and libraries can be found in electronic form on the supplied CD-ROM. The CD-ROM also
contains all tools and utilities described in the documentation.
Support
Support is available from:
TERIDIAN Semiconductor Corporation
6440 Oak Canyon Rd.
Irvine, CA 92618-5201
Phone: (714) 508-8800 ▪ Fax: (714) 508-8878
http://www.teridian.com/
meter.support@teridian.com
TERIDIAN Semiconductor Corporation makes no warranty for the use of its products, other than expressly contained in the
Company’s warranty detailed in the TERIDIAN Semiconductor Corporation standard Terms and Conditions. The company
assumes no responsibility for any errors which may appear in this document, reserves the right to change devices or
specifications detailed herein at any time without notice and does not make any commitment to update the information
contained herein.
Revision 1.7 2 of 2
© Copyright 2004-2006 TERIDIAN Semiconductor Corporation
Loading...