Maxim MAX8877EUK36-T Datasheet

For free samples & the latest literature: http://www.maxim-ic.com, or phone 1-800-998-8800. For small orders, phone 408-737-7600 ext. 3468.
__________________General Description
The MAX8877/MAX8878 low-noise, low-dropout linear regulators operate from a 2.5V to 6.5V input and deliver up to 150mA. These devices are pin-compatible with the industry-standard ‘2982 and offer an improved dropout voltage. Typical output noise is 30µV
RMS
, and typical dropout is only 165mV at 150mA. The output voltage is preset to voltages in the range of 2.5V to
5.0V, in 100mV increments. Designed with an internal P-channel MOSFET pass
transistor, the MAX8877/MAX8878 maintain a low 100µA supply current, independent of the load current and dropout voltage. Other features include a 10nA logic-controlled shutdown mode, short-circuit and ther­mal-shutdown protection, and reverse battery protec­tion. The MAX8878 also includes an auto-discharge function, which actively discharges the output voltage to ground when the device is placed in shutdown. Both devices come in a miniature 5-pin SOT23 package.
________________________Applications
Cellular Telephones Cordless Telephones PCS Telephones PCMCIA Cards Modems Hand-Held Instruments Palmtop Computers Electronic Planners
____________________________Features
Pin-Compatible with the Industry-Standard ‘2982Low Output Noise: 30µV
RMS
Low 55mV Dropout at 50mA Output
(165mV at 150mA output)
Low 85µA No-Load Supply CurrentLow 100µA Operating Supply Current
(even in dropout)
Thermal-Overload and Short-Circuit ProtectionReverse Battery ProtectionOutput Current LimitPreset Output Voltages (±1.4% Accuracy)10nA Logic-Controlled Shutdown
MAX8877/MAX8878
Low-Noise, Low-Dropout, 150mA Linear
Regulators with ‘2982 Pinout
________________________________________________________________
Maxim Integrated Products
1
GND
BP
SHDN
1
5
OUT
IN
MAX8877 MAX8878
SOT23-5
TOP VIEW
2
3
4
_____________________Pin Configuration
MAX8877 MAX8878
INPUT
2.5V TO 6.5V IN OUT
SHDN BP
GND
OUTPUT PRESET
2.5V TO 5.0V 150mA
C
BP
0.01µF
C
OUT
1µF
C
IN
1µF
OFF
ON
____________Typical Operating Circuit
19-1301; Rev 1; 3/98
PART**
MAX8877C/Dxy
MAX8877EUKxy-T MAX8878C/Dxy
0°C to +70°C
-40°C to +85°C
0°C to +70°C
TEMP. RANGE PIN-PACKAGE
Dice* 5 SOT23-5 Dice*
_________________Ordering Information
*
Dice are tested at TA= +25°C only.
**
xy is the output voltage code (see Expanded Ordering Information table at end of data sheet).
MAX8878EUKxy-T -40°C to +85°C 5 SOT23-5
MAX8877/MAX8878
Low-Noise, Low-Dropout, 150mA Linear Regulators with ‘2982 Pinout
2 _______________________________________________________________________________________
ABSOLUTE MAXIMUM RATINGS
ELECTRICAL CHARACTERISTICS
(VIN= V
OUT(NOMINAL)
+ 0.5V, TA= -40°C to +85°C, unless otherwise noted. Typical values are at TA= +25°C.) (Note 1)
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
Note 1: Limits are 100% production tested at TA= +25°C. Limits over the operating temperature range are guaranteed through
correlation using Statistical Quality Control (SQC) Methods.
Note 2: The dropout voltage is defined as V
IN
- V
OUT
, when V
OUT
is 100mV below the value of V
OUT
for VIN= V
OUT
+ 0.5V.
Note 3: Time needed for V
OUT
to reach 95% of final value.
IN to GND....................................................................-7V to +7V
Output Short-Circuit Duration ............................................Infinite
SHDN to GND..............................................................-7V to +7V
SHDN to IN...............................................................-7V to +0.3V
OUT, BP to GND..........................................-0.3V to (V
IN
+ 0.3V)
Continuous Power Dissipation (TA= +70°C)
SOT23-5 (derate 7.1mW/°C above +70°C)..................571mW
Operating Temperature Range ...........................-40°C to +85°C
Junction Temperature......................................................+150°C
θ
JB
..................................................................................140°C/W
Storage Temperature.........................................-65°C to +160°C
Lead Temperature (soldering, 10sec).............................+300°C
MAX8878 only
CBP= 0.1µF C
OUT
= 1µF, no load
I
OUT
= 0mA, TA= +25°C
V
OUT
= 0V
V
SHDN
= V
IN
VIN= 2.5V to 5.5V
I
OUT
= 0mA to 120mA, C
OUT
= 1µF
VIN= 2.5V to 5.5V
I
OUT
= 150mA
I
OUT
= 50mA
No load I
OUT
= 150mA
I
OUT
= 1mA
f = 10Hz to 100kHz, CBP= 0.01µF
CONDITIONS
300Resistance Shutdown Discharge
300
µs
30 150
Shutdown Exit Delay (Note 3)
0.2
µA
0.01 1
I
Q(SHDN)
Shutdown Supply Current
0.5
nA
0.01 100
I
SHDN
SHDN Input Bias Current
0.4V
IL
V
2.0V
IH
SHDN Input Threshold
20
µV
RMS
30
e
n
Output Voltage Noise
mA150Maximum Output Current
-1.4 1.4
V2.5 6.5V
IN
Input Voltage
%/mA0.01 0.04∆V
LDR
Load Regulation
165
55 120
mA160 390I
LIM
Current Limit
µA
85 180
I
Q
Ground Pin Current
100
mV
1.1
Dropout Voltage (Note 2)
UNITSMIN TYP MAXSYMBOLPARAMETER
TA= -40°C to +85°C
TA= +25°C
TA= +85°C
TA= +25°C
TA= +85°C
TA= +25°C
C
OUT
= 100µF
C
OUT
= 10µF
°C155T
SHDN
Thermal Shutdown Temperature
°C15∆T
SHDN
Thermal Shutdown Hysteresis
I
OUT
= 0mA to 120mA, TA= -40°C to +85°C
%
-3 2
Output Voltage Accuracy
VIN= (V
OUT
+ 0.1V) to 6.5V, I
OUT
= 1mA %/V-0.15 0 0.15∆V
LNR
Line Regulation
SHUTDOWN
THERMAL PROTECTION
MAX8877/MAX8878
Low-Noise, Low-Dropout, 150mA Linear
Regulators with ‘2982 Pinout
_______________________________________________________________________________________
3
2.40
2.45
2.50
2.55
2.60
0 50 100 150
OUTPUT VOLTAGE vs. LOAD CURRENT
(MAX887_EUK25)
MAX8877-01
LOAD CURRENT (mA)
OUTPUT VOLTAGE (V)
4.8
4.9
5.0
5.1
5.2
0 50 100 150
OUTPUT VOLTAGE vs. LOAD CURRENT
(MAX887_EUK50)
MAX8877-02
LOAD CURRENT (mA)
OUTPUT VOLTAGE (V)
60
65
70
75
80
85
90
95
100
105
110
0 50 100 150
GROUND PIN CURRENT
vs. LOAD CURRENT
MAX8877-03
LOAD CURRENT (mA)
GROUND PIN CURRENT (µA)
MAX887_EUK50
MAX887_EUK25
0
40
20
80
60
100
120
0 2 31 4 5 6
GROUND PIN CURRENT vs. INPUT VOLTAGE
(MAX887_EUK25)
MAX8877-04
INPUT VOLTAGE (V)
GROUND PIN CURRENT (µA)
NO LOAD
I
LOAD
= 50mA
2.40
2.45
2.50
2.55
2.60
-40 40200-20 60 80 100
OUTPUT VOLTAGE vs. TEMPERATURE
(MAX887_EUK25)
MAX8877-07
TEMPERATURE (°C)
OUTPUT VOLTAGE (V)
I
LOAD
= 50mA
0
40
20
80
60
100
120
0 2 31 4 5 6
GROUND PIN CURRENT vs. INPUT VOLTAGE
(MAX887_EUK50)
MAX8877-05
INPUT VOLTAGE (V)
GROUND PIN CURRENT (µA)
NO LOAD
I
LOAD
= 50mA
0
2
1
4
3
5
6
0 2 31 4 5 6
OUTPUT VOLTAGE vs. INPUT VOLTAGE
MAX8877-06
INPUT VOLTAGE (V)
OUTPUT VOLTAGE (V)
MAX887_EUK25
NO LOAD
MAX887_EUK50
4.8
4.9
5.0
5.1
5.2
-40 40200-20 60 80 100
OUTPUT VOLTAGE vs. TEMPERATURE
(MAX887_EUK50)
MAX8877-08
TEMPERATURE (°C)
OUTPUT VOLTAGE (V)
I
LOAD
= 50mA
0
60 40 20
100
80
180 160 140 120
200
-40 -20 0 20 40 60 80 100
GROUND PIN CURRENT
vs. TEMPERATURE
MAX8877-09
TEMPERATURE (°C)
GROUND PIN CURRENT (µA)
MAX887_EUK50
MAX887_EUK25
I
LOAD
= 50mA
__________________________________________Typical Operating Characteristics
(VIN= V
OUT(NOMINAL)
+ 0.5V, CIN= 1µF, C
OUT
= 1µF, CBP= 0.01µF, TA= +25°C, unless otherwise noted.)
Loading...
+ 5 hidden pages