How it Works
Maxim
Loading...
MAX874CSA
Datasheet
8 pgs115.49 Kb0

Maxim MAX874ESA, MAX874EPA, MAX874C-D, MAX874CPA, MAX872C-D Datasheet

...
MAX872/MAX874
10µA, Low-Dropout,
Precision Voltage References
________________________________________________________________
Maxim Integrated Products
1
For free samples & the latest literature: http://www.maxim-ic.com, or phone 1-800-998-8800. For small orders, phone 1-800-835-8769.
General Description
The MAX872/MAX874 precision 2.5V and 4.096V micro­power voltage references consume a maximum of only 10µA and operate from supply voltages up to 20V. The combination of ultra-low quiescent current and low 200mV dropout makes them ideal for battery-powered equipment. They source and sink up to 500µA with only 200mV input voltage headroom, which makes the 2.5V MAX872 ideal for use with a 3V supply and the 4.096V MAX874 ideal for use with a 5V supply.
Initial accuracy of 0.2% at +25°C (±5mV for the MAX872, ±8mV for the MAX874) and low 40ppm/°C max drift make these references suitable for a wide range of precision applications.
Applications
Hand-Held Instruments Battery-Operated Equipment Power Supplies
Features
♦ Output Voltage
2.500V ±0.2% (MAX872)
4.096V ±0.2% (MAX874)
♦ Wide Operating Voltage Range
2.7V to 20V (MAX872)
4.3V to 20V (MAX874)
♦ 10µA Max Supply Current ♦ 40ppm/°C Max Drift Over Extended Temp. Range ♦ Line Regulation Over Temp.
20µV/V (MAX872) 75µV/V (MAX874)
♦ Load Regulation Over Temp.
0.6mV/mA Max (MAX872)
1.0mV/mA Max (MAX874)
♦ ±500µA Sink/Source Current
V
OUT
TRIMGND
1 2
87COMP
I.C.V
IN
TEMP
I.C.
DIP/SO
TOP VIEW
3
4
6
5
MAX872 MAX874
GND
V
IN
3.0V (MAX872)
5.0V (MAX874)
REFERENCE WITH TRIMMED OUTPUT
V
OUT
TRIM
MAX872 MAX874
Typical Operating Circuit
19-0005; Rev 2; 6/97
PART
MAX872CPA
MAX872CSA MAX872C/D 0°C to +70°C
0°C to +70°C
0°C to +70°C
TEMP. RANGE PIN-PACKAGE
8 Plastic DIP 8 SO Dice*
*
Dice are specified at +25°C only.
Pin Configuration
Ordering Information
MAX872EPA MAX872ESA -40°C to +85°C
-40°C to +85°C 8 Plastic DIP 8 SO
MAX874CPA MAX874CSA MAX874C/D 0°C to +70°C
0°C to +70°C
0°C to +70°C 8 Plastic DIP
8 SO Dice*
MAX874EPA MAX874ESA -40°C to +85°C
-40°C to +85°C 8 Plastic DIP 8 SO
MAX872/MAX874
10µA, Low-Dropout, Precision Voltage References
2 _______________________________________________________________________________________
ABSOLUTE MAXIMUM RATINGS
ELECTRICAL CHARACTERISTICS—MAX872
(VIN= 2.7V, IL= 0mA, TA= +25°C, unless otherwise noted.)
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
Supply Voltage.......................................................................24V
Output Short-Circuit Duration ..........Continuous to Either Supply
C
COMP
Input...........................................................-0.3V to V
OUT
TRIM Input ...................................................-0.3V to (VIN+ 0.3V)
TEMP Output ...............................................-0.3V to (V
IN
+ 0.3V)
Continuous Power Dissipation (T
A
= +70°C)
Plastic DIP (derate 9.09mW/°C above +70°C) .............727mW
SO (derate 5.88mW/°C above +70°C)..........................471mW
Operating Temperature Ranges
MAX87_C__ .........................................................0°C to +70°C
MAX87_E__ ......................................................-40°C to +85°C
Storage Temperature Range.............................-65°C to +150°C
Junction Temperature Range (T
j
)......................-65°C to +160°C
Lead Temperature (soldering, 10sec).............................+300°C
VIN= 4.5V to 20V
0.1Hz to 10Hz
V
OUT
short to V
IN
V
OUT
short to GND
VIN= 2.7V to 20V
VIN= 2.7V to 5.5V Sourcing 0mA to 0.5mA Sinking 0mA to -0.5mA
V
OUT
≥ V
OUT
+ 0.2V
CONDITIONS
mV+75/-20 +100/-25V
ADJ
V
OUT
Adjustment Range
412
µVp-p60e
n
V2.495 2.500 2.505V
OUT
Output Voltage Output Voltage Noise
mV690V
TEMP
TEMP Voltage
mA
39
I
SC
Short-Circuit Output Current
615
µA/V0.35 0.55IQ/V
IN
Change in Supply Current vs. V
IN
µV/V
80 250
V
OUT/VIN
Line Regulation
0.2 0.5 mV/mA
412
V
OUT/IOUT
Load Regulation (Note 1)
µA6.5 10I
Q
Quiescent Supply Current
UNITSMIN TYP MAXSYMBOLPARAMETER
ELECTRICAL CHARACTERISTICS—MAX874
(VIN= 4.3V, IL= 0mA, TA= +25°C, unless otherwise noted.)
VIN= 4.3V to 20V
0.1Hz to 10Hz
V
OUT
short to V
IN
V
OUT
short to GND
VIN= 4.3V to 20V
Sourcing 0mA to 0.5mA Sinking 0mA to -0.5mA
V
OUT
≥ V
OUT
+ 0.2V
CONDITIONS
mV±150 ±200V
ADJ
V
OUT
Adjustment Range
15 75
µVp-p90e
n
V4.088 4.096 4.104V
OUT
Output Voltage Output Voltage Noise
mV690V
TEMP
TEMP Voltage
mA
525
I
SC
Short-Circuit Output Current
615
µA/V0.35 0.55IQ/V
IN
Change in Supply Current vs. V
IN
µV/VV
OUT/VIN
Line Regulation
0.15 0.9 mV/mA
615
V
OUT/IOUT
Load Regulation (Note 1)
µA6.5 10I
Q
Quiescent Supply Current
UNITSMIN TYP MAXSYMBOLPARAMETER
MAX872/MAX874
10µA, Low-Dropout,
Precision Voltage References
_______________________________________________________________________________________ 3
Note 1: If the load current exceeds 300µA, connect a minimum of 1000pF from V
OUT
to GND. Note that if a capacitor larger than
1000pF is used, a compensation capacitor of C
OUT
/100 must be connected from V
OUT
to COMP.
ELECTRICAL CHARACTERISTICS—MAX872C
(VIN= 2.7V, IL= 0mA, TA= 0°C to +70°C, unless otherwise noted.)
VIN= 4.5V to 20V
VIN= 2.7V to 20V
VIN= 2.7V to 5.5V Sourcing 0mA to 0.4mA Sinking 0mA to -0.4mA
CONDITIONS
20
ppm/°C20 40TCV
OUT
V2.4905 2.5095V
OUT
Output Voltage Output Voltage Temperature
Coefficient
mV/°C2.3TCV
TEMP
TEMP Output Temperature Coefficient
µA/V0.7IQ/V
IN
Change in Supply Current vs. V
IN
µV/V
300
V
OUT/VIN
Line Regulation
0.6 mV/mA
15
V
OUT/IOUT
Load Regulation (Note 1)
µA15I
Q
Quiescent Supply Current
UNITSMIN TYP MAXSYMBOLPARAMETER
VIN≥ V
OUT
+ 0.2V mV+75/-20V
ADJ
V
OUT
Adjustment Range
ELECTRICAL CHARACTERISTICS—MAX874C
(VIN= 4.3V, IL= 0mA, TA= 0°C to +70°C, unless otherwise noted.)
VIN≥ V
OUT
+ 0.2V mV±150
VIN= 4.3V to 20V
V
ADJ
V
OUT
Adjustment Range
VIN= 4.3V to 20V
Sourcing 0mA to 0.4mA Sinking 0mA to -0.4mA
CONDITIONS
75
ppm/°C20 40TCV
OUT
V4.0805 4.1115V
OUT
Output Voltage Output Voltage Temperature
Coefficient
mV/°C2.3TCV
TEMP
TEMP Output Temperature Coefficient
µA/V0.7IQ/V
IN
Change in Supply Current vs. V
IN
µV/VV
OUT/VIN
Line Regulation
1.0 mV/mA
25
V
OUT/IOUT
Load Regulation (Note 1)
µA15I
Q
Quiescent Supply Current
UNITSMIN TYP MAXSYMBOLPARAMETER
Loading...
+ 5 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use