MAXIM MAX4901, MAX4905 User Manual

现货库存、技术资料、百科信息、热点资讯,精彩尽在鼎好!
General Description
The MAX4901–MAX4905 switches feature negative signal capability that allows signals below ground to pass through without distortion. The MAX4901/MAX4902 are a dual SPST (single-pole/single-throw) and the MAX4903/ MAX4904/MAX4905 are a single SPDT (single­pole/double-throw) configuration. These analog switches operate from a single +1.8V to +5.5V supply and have low 0.6on-resistance, making them ideal for switching audio signals.
The MAX4905 includes a comparator that can be used for headphone detection or mute/send key function. The MAX4902/MAX4904/MAX4905 have internal shunt resis­tors to automatically discharge any capacitance at the NO_ and NC connection points. This reduces click-and­pop sounds that occur when switching audio signals between pre-charged points. A break-before-make fea­ture and auto-discharge also help to reduce popping.
These SPST and SPDT switches are available in space-saving 8-pin TDFN and 9-bump UCSP™ pack­ages and operate over the -40°C to +85°C extended temperature range.
Applications
Features
Distortion-Free Signal Throughput Down
to VCC- 5.5V
Comparator for Headphone or
Mute Detection (MAX4905)
Clickless Switches with Internal Shunt Resistors
(MAX4902/MAX4904/MAX4905)
0.6(typ) Low On-Resistance (R
ON
)
0.25On-Resistance Flatness+1.8V to +5.5V Supply Voltage0.04% THD
MAX4901–MAX4905
Low-R
ON
, Dual-SPST/Single-SPDT Clickless
Switches with Negative Rail Capability
________________________________________________________________ Maxim Integrated Products 1
19-3775; Rev 2; 5/06
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at 1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.
Ordering Information/Selector Guide
PART PIN-PACKAGE
TOP MARK
CONFIGURATION
COMPARATOR
SHUNT
PKG CODE
MAX4901EBL-T
AEU 2 x SPST No No B9-1
MAX4901ETA-T
8 TD FN - 8 AOW 2 x SPST No No T833-2
MAX4902EBL-T
AEV 2 x SPST No Yes B9-1
MAX4902ETA-T
8 TD FN - 8AOX 2 x SPST No Yes T833-2
MAX4903EBL-T
AEY 1 x SPDT No No B9-1
MAX4903ETA-T
8 TD FN - 8AOY 1 x SPDT No No T833-2
MAX4904EBL-T
AEW 1 x SPDT No Yes B9-1
MAX4904ETA-T
8 TD FN - 8AOZ 1 x SPDT No Yes T833-2
MAX4905EBL-T
AEX 1 x SPDT Yes Yes B9-1
MAX4905ETA-T
8 TD FN - 8 APA 1 x SPDT Yes Yes T833-2
Note: All devices operate over the -40°C to +85°C operating temperature range.
UCSP is a trademark of Maxim Integrated Products, Inc.
Pin Configurations
3 x 3 UCSP
MAX4901/MAX4902
123
B
C
A
B
C
A
TOP VIEW
BUMPS ON BOTTOM
COM1
NO1 IN1
V
CC
N.C. GND
COM2
NO2
IN2
3 x 3 UCSP
MAX4903/MAX4904/MAX4905
123
V
CC
NO
IN
COM N.C. (CMPO) GND
N.C.
NC
N.C. (CMP-)
( ) MAX4905 ONLY
Pin Configurations continued at end of data sheet.
Cell Phones
PDAs and Handheld Devices
Notebook Computers
MP3 Players
1.5m m x 1.5m m 9 U C S P - 9
1.5m m x 1.5m m 9 U C S P - 9
1.5m m x 1.5m m 9 U C S P - 9
1.5m m x 1.5m m 9 U C S P - 9
1.5m m x 1.5m m 9 U C S P - 9
MAX4901–MAX4905
Low-R
ON
, Dual-SPST/Single-SPDT Clickless
Switches with Negative Rail Capability
2 _______________________________________________________________________________________
ABSOLUTE MAXIMUM RATINGS
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
(All voltages referenced to GND.) V
CC
, IN_, CMP-......................................................-0.3V to +6.0V
COM_, NO_, NC ................................(V
CC
- 6V) to (VCC+ 0.3V)
CMPO.........................................................-0.3V to (V
CC
+ 0.3V)
Open-Switch Continuous Current NO_, NC
(MAX4902/MAX4904/MAX4905)...................................±30mA
Closed-Switch Continuous Current COM_, NO_, NC.....±100mA
Peak Current COM_, NO_, NC
(Pulsed at 1ms, 50% duty cycle)................................±200mA
Peak Current COM_, NO_, NC
(Pulsed at 1ms, 10% duty cycle)................................±300mA
Continuous Power Dissipation (T
A
= +70°C)
8-Pin TDFN (derate 18.2mW/°C above +70°C) .........1455mW
9-Bump UCSP (derate 5.2mW/°C above +70°C).........412mW
ESD Method 3015.7 .............................................................±2kV
Operating Temperature Range ...........................-40°C to +85°C
Junction Temperature......................................................+150°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
Bump Temperature (soldering)
Infrared (15s) ...............................................................+220°C
Vapor Phase (60s) .......................................................+215°C
ELECTRICAL CHARACTERISTICS
(V
CC
= +2.7V to +5.5V, TA= -40°C to +85°C, unless otherwise noted. Typical values are at VCC= +3.0V, TA= +25°C, unless other-
wise noted.) (Note 1)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
POWER SUPPLY
Power-Supply Range V
CC
1.8 5.5 V
MAX4901– MAX4904
1
Supply Current I+
V
CC
= 5.5V,
V
IN_
= 0V or V
CC
MAX4905 5 10
µA
ANALOG SWITCH
Analog Signal Range
V
NO
_ VNC,
V
COM_
(Note 2)
V
CC
-
5.5
V
TA = +25°C 0.6 1.0
On-Resistance
R
ON(NC),
)
VCC = 2.7V, V
NC
or V
NO_
= VCC - 5.5V, -1V, 0, 1V, 2V, V
CC; ICOM
= 100mA
(Notes 3, 4)
T
A
= T
MIN
to
T
MAX
1.2
TA = +25°C
On-Resistance Match Between Channels
R
ON
VCC = 2.7V, I
NO_
or
I
NC
= 100mA or V
NO_
(Notes 3, 4, 5)
T
A
= T
MIN
to
T
MAX
TA = +25°C
0.5
On-Resistance Flatness R
FLAT
V
C C
= 2.7V, V
N C
or V
NO_
= V
C C
- 5.5V , -1V, 0, 1V,
(Notes 4, 6)
T
A
= T
MIN
to
T
MAX
0.5
R
ON(NO
2V, VCC; I
= 100mA
COM
0.001
0.01 0.25
0.25
V
CC
0.30
MAX4901–MAX4905
Low-R
ON
, Dual-SPST/Single-SPDT Clickless
Switches with Negative Rail Capability
_______________________________________________________________________________________ 3
ELECTRICAL CHARACTERISTICS (continued)
(V
CC
= +2.7V to +5.5V, TA= -40°C to +85°C, unless otherwise noted. Typical values are at VCC= +3.0V, TA= +25°C, unless other-
wise noted.) (Note 1)
PARAMETER
CONDITIONS
UNITS
Shunt Resistance R
SH
I
NO_
or I
NC
= 10mA,
V
CC
= 2.7V (MAX4902/MAX4904/ MAX4905)
TA = T
MIN
to T
MAX
30 50
-6 +6
NO_, NC Off-Leakage Current
),
)
VCC = 2.7V, switch open; V
NC
or V
NO_
= -2.5V, +2.5V; V
COM_
= +2.5V, -2.5V (MAX4901/ MAX4903) (Notes 3, 7)
TA = T
MIN
to T
MAX
nA
-6 +6
COM_ Off-Leakage Current
)
VCC = 2.7V, switch open; V
NC
or V
NO_
= -2.5V, +2.5V;
V
COM_
= -2.5V, +2.5V
(MAX4901) (Note 3)
T
A
= T
MIN
to T
MAX
nA
-6 +6
COM_ On-Leakage Current
)
VCC = 2.7V, switch closed; V
NC
or V
NO_
= -2.5V, +2.5V,
or unconnected ; V
C OM _
= - 2.5V ,
TA = T
MIN
to T
MAX
nA
DYNAMIC CHARACTERISTICS
Turn-On Time
t
ON
VCC = 2.7V, VNO = 1.5V, V
IN_
= 0V to VCC;
V
NC
= 1.5V, V
IN_
= VCC to 0; RL = 50Ω,
C
L
= 5pF (Figure 1)
25
ns
Turn-Off Time t
OFF
VCC = 2.7V, VNO_ = 1.5V, V
IN_
= VCC to 0;
V
NC
= 1.5V, V
IN_
= 0 to VCC; RL = 50Ω,
C
L
= 5pF (Figure 1)
15
ns
210 Break-Before-Make Time Delay (MAX4903/MAX4904/MAX4905)
t
BBM
VCC = 2.7V, V
NO_
= 1.5V,
V
IN_
= VCC to 0; VNC = 1.5V,
V
IN_
= 0 to VCC; RL = 50Ω,
C
L
= 5pF (Figure 2)
T
A
= T
MIN
to T
MAX
1
ns
Charge Injection Q
pC
Off-Isolation (Note 8) V
ISO
f = 100kHz, V
COM_
= 1V
RMS
,
R
L
= 50, CL = 5pF (Figure 4)
dB
Crosstalk V
CT
f = 100kHz, V
COM_
= 1V
RMS
,
R
L
= 50, CL = 5pF (Figure 4)
dB
Power-Supply Rejection Ratio PSRR
f = 10kHz, V
COM_
= 1V
RMS
,
R
L
= 50, CL = 5pF
60 dB
On-Channel -3dB Bandwidth BW
Signal = 0dBm, R
L
= 50Ω,
C
L
= 5pF (Figure 4)
27
MHz
Total Harmonic Distortion THD
f = 20Hz to 20kHz, V
COM
= 0.5V
P-P
,
DC bias = 0, R
L
= 32
%
SYMBOL
I
NO_(OFF
I
NC (OFF
I
COM_(OFF
I
COM_(ON
+2.5V or unconnected (Note 3)
TA = +25°C
TA = +25°C
TA = +25°C
MIN TYP MAX
-50 +50
-50 +50
-50 +50
100
V
= 0V, RS = 0, CL = 1.0nF (Figure 3) 125
COM_
TA = +25°C
-70
-75
0.04
100
MAX4901–MAX4905
Low-R
ON
, Dual-SPST/Single-SPDT Clickless
Switches with Negative Rail Capability
4 _______________________________________________________________________________________
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
NO_, NC Off-Capacitance
)
)
f = 1MHz, V
COM
= 0.5V
P-P
, DC bias = 0
(Figure 5)
40 pF
COM On-Capacitance
)
f = 1MHz, V
COM
= 0.5V
P-P
, DC bias = 0
(Figure 5)
pF
DIGITAL I/O (IN_)
VCC = 2.7V to 3.6V 1.4
Input Logic-High Voltage V
IH
VCC = 4.2V to 5.5V 2.0
V
VCC = 2.7V to 3.6V 0.5
Input Logic-Low Voltage V
IL
VCC = 4.2V to 5.5V 0.8
V
Input Leakage Current I
IN
V
IN_
= 0V or V
CC
-1 +1 µA
COMPARATOR (MAX4905)
Comparator Threshold
V
Comparator Output-High Voltage
I
SOURCE
= 1mA
V
CC
­V
Comparator Output-Low Voltage
I
SINK
= 1mA 0.4 V
Comparator Input Leakage
V
CMP
- = 0 to 2.7V
nA
Comparator Switching Time
V
CC
= 2.7V, V
CMP-
= 0V to VCC, from 50%
of V
CMP
- to 50% of V
CMPO
12µs
Note 1: UCSP and TDFN parts are 100% tested at TA= +25°C only, and guaranteed by design over the specified temperature
range.
Note 2: Signals on COM_, NO_, or NC exceeding V
CC
are clamped by internal diodes. Limit forward-diode current to maximum cur-
rent rating.
Note 3: Guaranteed by design. Note 4: I
COM
for UCSP is 10mA.
Note 5: ∆RON= R
ON(MAX)
– R
ON(MIN)
.
Note 6: Flatness is defined as the difference between the maximum and minimum value of on-resistance as measured over the
specified analog signal ranges.
Note 7: The MAX4902/MAX4904/MAX4905 have an internal shunt resistor when, in off-state, will determine off-current. Note 8: Off-Isolation = 20log10(V
COM
/ VNO), V
COM
= output, VNO= input to off switch.
ELECTRICAL CHARACTERISTICS (continued)
(V
CC
= +2.7V to +5.5V, TA= -40°C to +85°C, unless otherwise noted. Typical values are at VCC= +3.0V, TA= +25°C, unless other-
wise noted.) (Note 1)
C
NO_(OFF
C
NC(OFF
C
COM_(ON
0.4V
-100 +100
200
VCC / 3
Loading...
+ 9 hidden pages