How it Works
MAXIM
Loading...
MAX4739
Technical data
16 pgs312.9 Kb0

MAXIM MAX4737, MAX4738, MAX4739 Technical data

General Description
The MAX4737/MAX4738/MAX4739 low-voltage, low on­resistance (RON), quad single-pole/single throw (SPST) analog switches operate from a single +1.8V to +5.5V supply. These devices are designed for USB 1.1 and audio switching applications.
ON
(max) with 1.2Ω flatness and 0.4Ω matching between channels. These new switches feature guaranteed operation from +1.8V to +5.5V and are fully specified at 3V and 5V. These switches offer break-before-make switching (1ns) with tON<80ns and t
OFF
<40ns at +2.7V. The digital logic inputs are +1.8V logic compati­ble with a +2.7V to +3.6V supply.
These switches are packaged in a chip-scale package (UCSP™), significantly reducing the required PC board area. The chip occupies only a 2mm ✕ 2mm area and has a 4 ✕ 4 bump array with a bump pitch of 0.5mm. These switches are also available in a 14-pin TSSOP package.
Applications
Battery-Operated Equipment
Audio/Video-Signal Routing
Low-Voltage Data-Acquisition Systems
Sample-and-Hold Circuits
Data-Acquisition Systems
Communications Circuits
Features
♦ USB 1.1 Signal Switching ♦ 2ns (max) Differential Skew ♦ -3dB Bandwidth: >300MHz ♦ Low 20pF On-Channel Capacitance
♦ Low R
ON
4.5Ω (max) (+3V Supply) 3Ω (max) (+5V Supply)
♦ 0.4Ω (max) R
ON
Match (+3V Supply)
♦ 1.2Ω (max) R
ON
Flatness (+3V Supply)
♦ <0.5nA Leakage Current at +25°C ♦ High Off-Isolation: -55dB (10MHz) ♦ Low Crosstalk: -80dB (10MHz) ♦ Low Distortion: 0.03% ♦ +1.8V CMOS-Logic Compatible ♦ Single-Supply Operation from +1.8V to +5.5V ♦ Rail-to-Rail®Signal Handling
MAX4737/MAX4738/MAX4739
4.5
Ω
Quad SPST Analog Switches in UCSP
________________________________________________________________ Maxim Integrated Products 1
Ordering Information
19-2633; Rev 0; 10/02
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at 1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.
PART
TEMP RANGE
PIN/BUMP-
TOP
MARK
MAX4737EUD
14 TSSOP
—
MAX4737EBE-T*
4737
MAX4738EUD
14 TSSOP
—
MAX4738EBE-T*
4738
MAX4739EUD
14 TSSOP
—
MAX4739EBE-T*
4739
C
D
B
A
1234
IN2
COM2
COM1
NO2
IN3
V+
NO1
NO3
GND
IN1
COM3
COM4
NO4
IN4
TOP VIEW (BUMPS SIDE DOWN)
MAX4737
C
D
B
A
1234
IN2
COM2
COM1
NC2
IN3
V+
NC1
NC3
GND
IN1
COM3
COM4
NC4
IN4
MAX4738
C
D
B
A
1234
IN2
COM2
COM1
NC2
IN3
V+
NO1
NO3
GND
IN1
COM3
COM4
NC4
IN4
MAX4739
IN_ LOW HIGH
NO_ OFF
ON
NC_
ON
OFF
UCSP UCSP UCSP
Pin Configurations/Functional Diagrams/Truth Tables
UCSP is a trademark of Maxim Integrated Products, Inc. Rail-to-Rail is a registered trademark of Nippon Motorola, Ltd.
Note: UCSP package requires special solder temperature pro­file described in the Absolute Maximum Ratings section.
*UCSP reliability is integrally linked to the user’s assembly meth­ods, circuit board material, and environment. See the UCSP reli­ability notice in the UCSP Reliability section of this data sheet for more information.
查询MAX4737EBE-T供应商
PACKAGE
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
16 UCSP-16
16 UCSP-16
16 UCSP-16
MAX4737/MAX4738/MAX4739
4.5
Ω
Quad SPST Analog Switches in UCSP
2 _______________________________________________________________________________________
ABSOLUTE MAXIMUM RATINGS
ELECTRICAL CHARACTERISTICS—Single +3V Supply
(V+ = +2.7V to +3.6V, VIH= +1.4V, VIL= +0.5V, TA= T
MIN
to T
MAX
, unless otherwise noted. Typical values are at V+ = +3.0V,
T
A
= +25°C, unless otherwise noted.) (Notes 3, 4)
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
(All Voltages Referenced to GND)
V+, IN_...................................................................-0.3V to +6.0V
COM_, NO_, NC_ (Note 1) ...........................-0.3V to (V+ + 0.3V)
Continuous Current COM_, NO_, NC_ ...........................±100mA
Peak Current COM_, NO_, NC_
(pulsed at 1ms, 10% duty cycle)................................±200mA
Continuous Power Dissipation (T
A
= +70°C)
14-Pin TSSOP (derate 6.3mW/°C above +70°C) .........500mW
16-Bump UCSP (derate 8.3mW/°C above +70°C) ......659mW
ESD Method 3015.7 .............................................................>2kV
Operating Temperature Range ...........................-40°C to +85°C
Junction Temperature......................................................+150°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
Bump Temperature (soldering) (Note 2)
Infrared (15s) ...............................................................+220°C
Vapor Phase (60s) .......................................................+215°C
Note 1: Signals on COM_, NO_, or NC_ exceeding V+ or GND are clamped by internal diodes. Limit forward-diode current to maxi-
mum current rating.
Note 2: This device is constructed using a unique set of packaging techniques that impose a limit on the thermal profile the device
can be exposed to during board level solder attach and rework. This limit permits only the use of the solder profiles recom­mended in the industry standard specification, JEDEC 020A, paragraph 7.6, table 3 for IR/VPR and convection reflow. Preheating is required. Hand or wave soldering is not allowed.
)
)
)
)
Analog Signal Range
ANALOG SWITCH
On-Resistance (Note 5) R
On-Resistance Match Between Channels (Notes 5, 6)
On-Resistance Flatness (Note 7) R
NO_, NC_ Off-Leakage Current (Note 8)
COM_ Off-Leakage Current (Note 8)
COM_ On-Leakage Current (Note 8)
PARAMETER SYMBOL CONDITIONS T
V
,
COM_
V
, V
NO_
NC_
V+ = 2.7V, I
ON
∆R
ON
FLAT(ON
I
NO_(OFF
I
NC_(OFF
I
C OM_( OFF)
,
or V
V
NO_
V+ = 2.7V, I
or V
V
NO_
V+ = 2.7V, I V
or V
NO_
V+ = 3.6V, V
or V
V
NO_
V+ = 3.6V, V V
or V
NO_
V+ = 3.6V, V
I
COM_(ON
V
NO_
or V
floating
NC_
= 10mA;
COM_
= 1.5V
NC_
= 10mA;
COM_
= 1.5V
NC_
= 10mA;
COM_
= 1.0V, 1.5V, 2.0V
NC_
= 0.3V, 3.3V;
COM_
= 3.3V, 0.3V
NC_
= 0.3V, 3.3V;
COM_
= 3.3V, 0.3V
= 0.3V, 3.3V;
COM_
= 0.3V, 3.3V, or
NC_
A
MIN TYP MAX UNITS
0V+V
+25°C 3.0 4.5
T
to
MIN
T
MAX
5
+25°C 0.1 0.4
T
to
MIN
T
MAX
0.5
+25°C 0.6 1.2
T
to
MIN
T
MAX
1.5
+25°C -0.5 +0.01 +0.5
T
to
MIN
T
MAX
-1 +1
+25°C -0.5 +0.01 +0.5
to
T
MIN
T
MAX
-1 +1
+25°C -1 +0.01 +1
to
T
MIN
T
MAX
-2 +2
Ω
Ω
Ω
nA
nA
nA
MAX4737/MAX4738/MAX4739
4.5
Ω
Quad SPST Analog Switches in UCSP
_______________________________________________________________________________________ 3
ELECTRICAL CHARACTERISTICS—Single +3V Supply (continued)
(V+ = +2.7V to +3.6V, VIH= +1.4V, VIL= +0.5V, TA= T
MIN
to T
MAX
, unless otherwise noted. Typical values are at V+ = +3.0V,
T
A
= +25°C, unless otherwise noted.) (Notes 3, 4)
)
)
PARAMETER SYMBOL CONDITIONS T
DYNAMIC CHARACTERISTICS
V
, V
Turn-On Time t
Turn-Off Time t
Break-Before-Make Time Delay (MAX4739 Only) (Note 8)
Skew (Note 8) t
OFF
t
BBM
SKEW
Charge Injection Q
ON
NO_
= 300Ω, CL = 35pF, Figure 1
R
L
V
, V
NO_
= 300Ω, CL = 35pF, Figure 1
R
L
V
, V
NO_
R
= 300Ω, CL = 35pF, Figure 2
L
RS = 39Ω, CL = 50pF, Figure 3
V
GEN
= 1.0nF, Figure 4
C
L
f = 10MHz; V
= 50Ω, CL = 5pF, Figure 5a
R
Off-Isolation (Note 9) V
ISO
L
f = 1MHz; V
= 50Ω, CL = 5pF, Figure 5a
R
L
f = 10MHz; V R
= 50Ω, CL = 5pF, Figure 5b
Crosstalk (Note 10) V
On-Channel -3dB Bandwidth BW
CT
L
f = 1MHz; V R
= 50Ω, CL = 5pF, Figure 5b
L
Signal = 0dBm, C in and out, Figure 5a
Total Harmonic Distortion THD RL = 600Ω +25°C 0.03 %
C
NO_, NC_ Off-Capacitance
NO_(OFF
C
NC_(OFF
Switch On-Capacitance C
ON
,
f = 1MHz, Figure 6 +25°C9 pF
f = 1MHz, Figure 6 +25°C15 pF
DIGITAL I/O
Input Logic High Voltage V
Input Logic Low Voltage V
Input Leakage Current I
IH
IL
IN
V+ = 3.6V, V
NC_
NC_
NC_
= 2V, R
= 1.5V;
= 1.5V;
= 1.5V;
GEN
, V
NO_
, V
NO_
, V
NO_
, V
NO_
= 0 or 5.5V
IN_
A
MIN TYP MAX UNITS
+25°C4080
T
to
MIN
T
MAX
100
+25°C2040
T
to
MIN
T
MAX
50
+25°C8
T
to
= 0Ω,
= 1V
NC_
= 1V
NC_
= 1V
NC_
= 1V
NC_
= 5pF, 50Ω
L
P-P
P-P
MIN
T
MAX
T
to
MIN
T
MAX
+25°C5 pC
;
P-P
+25°C
;
;
P-P
+25°C
;
+25°C 300 MHz
T
to
MIN
T
MAX
T
to
MIN
T
MAX
T
to
MIN
T
MAX
1
0.15 2 ns
-55
-80
-80
-110
1.4 V
0.5 V
-0.1 +0.1 µA
ns
ns
ns
dB
dB
MAX4737/MAX4738/MAX4739
4.5
Ω
Quad SPST Analog Switches in UCSP
4 _______________________________________________________________________________________
ELECTRICAL CHARACTERISTICS—Single +5V Supply
(V+ = +4.2V to +5.5V, VIH= +2.0V, VIL= +0.8V, TA= T
MIN
to T
MAX
, unless otherwise noted. Typical values are at V+ = +5.0V,
T
A
= +25°C, unless otherwise noted.) (Notes 3, 4)
)
),
)
)
)
ELECTRICAL CHARACTERISTICS—Single +3V Supply (continued)
(V+ = +2.7V to +3.6V, VIH= +1.4V, VIL= +0.5V, TA= T
MIN
to T
MAX
, unless otherwise noted. Typical values are at V+ = +3.0V,
T
A
= +25°C, unless otherwise noted.) (Notes 3, 4)
PARAMETER SYMBOL CONDITIONS T
SUPPLY
Supply Voltage Range V+
Positive Supply Current I+ V+ = 5.5V, V
= 0V or V+
IN_
A
T
MIN
T
MAX
T
MIN
T
MAX
Analog Signal Range
PARAMETER SYMBOL CONDITIONS T
V
,
COM_
V
, V
NO_
NC_
ANALOG SWITCH
ON
V+ = 4.2V; I
or V
V
NO_
V+ = 4.2V; I
or V
V
NO_
On-Resistance (Note 5) R
On-Resistance Match Between Channels (Notes 5, 6)
∆R
ON
On-Resistance Flatness (Note 7) R
NO_, NC_ Off-Leakage Current (Note 8)
COM_ Off-Leakage Current (Note 8)
COM_ On-Leakage Current (Note 8)
FLAT(ON
I
NO_(OFF
I
NC_(OFF
I
COM_ (OFF
I
COM_(ON
DYNAMIC CHARACTERISTICS
Turn-On Time t
Turn-Off Time t
ON
OFF
V+ = 4.2V; I V
or V
NO_
V+ = 5.5V; V
or V
V
NO_
V+ = 5.5V; V
V
or V
NO_
V+ = 5.5V; V V
or V
NO_
floating
V
, V
NO_
R
= 300Ω, CL = 35pF, Figure 1
L
V
, V
NO_
= 300Ω, CL = 35pF, Figure 1
R
L
NC_
NC_
= 10mA;
COM_
= 3.5V
NC_
= 10mA;
COM_
= 3.5V
NC_
= 10mA;
COM_
= 1.0V, 2.0V, 3.5V
NC_
= 1.0V, 4.5V;
COM_
= 4.5V, 1.0V
NC_
= 1V, 4.5V;
COM_
= 4.5V, 1V
NC_
= 1.0V, 4.5V;
COM_
= 1.0V, 4.5V, or
NC_
= 3.0V;
= 3.0V;
A
T
MIN
T
MAX
+25°C 1.7 3.0
T
MIN
T
MAX
+25°C 0.1 0.3
T
MIN
T
MAX
+25°C 0.4 1.2
T
MIN
T
MAX
+25°C -0.5 0.01 +0.5
T
MIN
T
MAX
+25°C -0.5 0.01 +0.5
T
MIN
T
MAX
+25°C -1 0.01 +1
T
MIN
T
MAX
+25°C3080
T
MIN
T
MAX
+25°C2040
T
MIN
T
MAX
MIN TYP MAX UNITS
to
1.8 5.5 V
to
MIN TYP MAX UNITS
to
0V+V
to
to
to
to
to
to
-1 +1
-1 +1
-2 +2
to
to
1µA
35
0.4
1.5
Ω
Ω
Ω
nA
nA
nA
100
50
ns
ns
MAX4737/MAX4738/MAX4739
4.5
Ω
Quad SPST Analog Switches in UCSP
_______________________________________________________________________________________ 5
ELECTRICAL CHARACTERISTICS—Single +5V Supply (continued)
(V+ = +4.2V to +5.5V, VIH= +2.0V, VIL= +0.8V, TA= T
MIN
to T
MAX
, unless otherwise noted. Typical values are at V+ = +5.0V,
T
A
= +25°C, unless otherwise noted.) (Notes 3, 4)
Note 3: UCSP parts are 100% tested at +25°C only, and guaranteed by design over the specified temperature range. TSSOP parts
are 100% tested at T
MAX
and guaranteed by design over the specified temperature range.
Note 4: The algebraic convention used in this data sheet is where the most negative value is a minimum and the most positive
value is a maximum.
Note 5: Guaranteed by design for UCSP parts. Note 6: ∆R
ON
= R
ON(MAX)
- R
ON(MIN)
.
Note 7: Flatness is defined as the difference between the maximum and minimum value of on-resistance as measured over the
specified analog signal ranges.
Note 8: Guaranteed by design. Note 9: Off-Isolation = 20log
10(VCOM
/ VNO), V
COM
= output, VNO= input to off switch.
Note 10: Between any two switches.
Break-Before-Make Time Delay (MAX4739 Only) (Note 8)
Skew (Note 8) t
DIGITAL I/O
Input Logic High Voltage V
Input Logic Low Voltage V
Input Leakage Current I
POWER SUPPLY
Power-Supply Range V+
Positive Supply Current I+ V+ = 5.5V, V
PARAMETER SYMBOL CONDITIONS T
V
, V
t
BBM
SKEW
IH
IL
IN
NO_
= 300Ω, CL = 35pF, Figure 2
R
L
RS = 39Ω, CL = 50pF, Figure 3
V+ = 5.5V, VIN_ = 0V or V+
NC_
= 3.0V;
= 0V or V+
IN_
A
+25°C8
T
MIN
T
MAX
T
MIN
T
MAX
T
MIN
T
MAX
T
MIN
T
MAX
T
MIN
T
MAX
T
MIN
T
MAX
T
MIN
T
MAX
MIN TYP MAX UNITS
to
to
to
2.0 V
to
to
-0.1 +0.1 µA
to
1.8 5.5 V
to
1
0.15 2 ns
ns
0.8 V
1µA
Loading...
+ 11 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use