MAXIM MAX4452, MAX4453, MAX4454, MAX4352, MAX4353 Technical data

General Description

The MAX4452/MAX4352 single, MAX4453/MAX4353
dual, and MAX4454/MAX4354 quad amplifiers combine
high-speed performance with ultra-low power con­sumption. The MAX4452/MAX4453/MAX4454 are unity­gain stable and achieve a -3dB bandwidth of 200MHz,
while the MAX4352/MAX4353/MAX4354 are compen­sated for a minimum closed-loop gain of +5V/V and
achieve a 80MHz -3dB bandwidth. These devices con­sume only 620µA of supply current per amplifier.

These amplifiers operate from a +2.7V to +5.25V single
supply and feature rail-to-rail outputs. Along with an
excellent speed/power ratio of 323MHz/mA, these
devices feature a slew rate of 95V/µs and fast 20ns rise
and fall times. These devices are ideal for low­power/low-voltage systems that require wide bandwidth
such as cell phones and keyless entry systems.

The MAX4452/MAX4352 are available in miniature 5-pin
SC70 and SOT23 packages, while the MAX4453/
MAX4353 are available in tiny 8-pin SOT23, Thin SOT23,
and SO packages. The MAX4454/MAX4354 are avail­able in space-saving 14-pin TSSOP and SO packages.

________________________Applications

Battery-Powered Instruments

Cellular Telephones

Portable Communications

Keyless Entry

Baseband Applications

Features

♦ Ultra-Low 620µA Supply Current

♦ High Speed (MAX4452/MAX4453/MAX4454)

200MHz -3dB Bandwidth
30MHz 0.1dB Gain Flatness
95V/µs Slew Rate

♦ High Speed (MAX4352/MAX4353/MAX4354)

80MHz -3dB Bandwidth
4MHz 0.1dB Gain Flatness
240V/µs Slew Rate

♦ Single +3V/+5V Operation

♦ Rail-to-Rail Outputs

♦ Ultra-Small SC70-5, SOT23-5, SOT23-8 and Thin

SOT23-8 Packages

MAX4452/MAX4453/MAX4454/MAX4352/MAX4353/MAX4354

Low-Cost, +3V/+5V, 620µA, 200MHz,

Single-Supply Op Amps with Rail-to-Rail Outputs

________________________________________________________________ Maxim Integrated Products 1

19-1824; Rev 1; 1/05

Ordering Information

PA R T

T EM P RA N G E

PIN - PA C K A G E

TO P

M A R K

M A X4 4 5 2 E X K- T

5 S C 70- 5ABI

M AX 4452E U K- T

5 S OT23- 5

AD O V

M A X4 4 5 3 E KA- T

8 S OT23- 8

AAD S

M AX 4453E Z A- T

AAAB

M AX 4453E S A

8 S O—

M A X4 4 5 4 E U D

14 TS S O P —

M AX 4454E S D

14 S O —

M A X4 3 5 2 E X K- T

5 S C 70- 5

ABJ

M AX 4352E U K- T

5 S OT23- 5

AD OW

M A X4 3 5 3 E KA- T

8 S OT23- 8

AAD T

M AX 4353E S A

8 S O—

M A X4 3 5 4 E U D

14 TS S O P —

M AX 4354E S D

14 S O —

PART

NO.

OF

MIN

GAIN

BANDWIDTH

(MHz)

SLEW

RATE

(V/µs)

MAX4452

1 1 200 95

MAX4352

1 5 400 240

MAX4453

2 1 200 95

MAX4353

2 5 400 240

MAX4454

4 1 200 95

MAX4354

4 5 400 240

Selector Guide

For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.

Typical Operating Characteristic

Pin Configurations appear at end of data sheet.

MAX4452/3/4 toc01

0.40

0.45

0.55

0.50

0.70

0.75

0.65

0.60

0.80

SUPPLY CURRENT (mA)

2.7 3.5 3.93.1

4.3

4.7 5.1 5.5

SUPPLY VOLTAGE (V)

SUPPLY CURRENT vs.

SUPPLY VOLTAGE (PER AMPLIFIER)

- 40° C to + 85° C

- 40° C to + 85° C

- 40° C to + 85° C

- 40° C to + 85° C 8 Thi n S O T23- 8

- 40° C to + 85° C

- 40° C to + 85° C

- 40° C to + 85° C

- 40° C to + 85° C

- 40° C to + 85° C

- 40° C to + 85° C

- 40° C to + 85° C

- 40° C to + 85° C

- 40° C to + 85° C

AMPS

GAIN

MAX4452/MAX4453/MAX4454/MAX4352/MAX4353/MAX4354

Low-Cost, +3V/+5V, 620µA, 200MHz,
Single-Supply Op Amps with Rail-to-Rail Outputs

2 _______________________________________________________________________________________

ABSOLUTE MAXIMUM RATINGS

DC ELECTRICAL CHARACTERISTICS

(VCC= +5V, VCM= VCC/2 - 0.75V, VEE= 0, RL= ∞ to VCC/2, V

OUT

= VCC/2, TA= T

MIN

to T

MAX

, unless otherwise noted. Typical val-

ues are at T

A

= +25°C.) (Note 1)

Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.

Supply Voltage (VCCto VEE)..................................................+6V

Differential Input Voltage ......................................................2.5V

IN_-, IN_+, OUT_..............................(V

CC

+ 0.3V) to (VEE- 0.3V)

Current into Input Pins (IN_+, IN_-) ..................................±20mA

Output Short-Circuit Duration to V

CC

, VEE................Continuous

Continuous Power Dissipation (T

A

= +70°C)

5-Pin SC70 (derate 3.1mW/°C above +70°C).............247mW

5 Pin SOT23 (derate 7.1mW/°C above +70°C)...........571mW

8-Pin SOT23 (derate 8.9mW/°C above +70°C)...........741mW

8-Pin Thin SOT23 (derate 6.3mW/°C

above +70°C)..............................................................500mW

8-Pin SO (derate 5.9mW/°C above +70°C).................471mW

14-Pin TSSOP (derate 6.3mW/°C above +70°C) ........500mW

14-Pin SO (derate 8mW/°C above +70°C)..................640mW

Operating Temperature Range ...........................-40°C to +85°C

Junction Temperature......................................................+150°C

Storage Temperature Range .............................-65°C to +150°C

Lead Temperature (soldering, 10s) .................................+300°C

PARAMETER

SYMBOL

CONDITIONS

MIN

TYP

MAX

UNITS

Operating Supply Voltage
Range

VSGuaranteed by PSRR test

2.7

5.25

V

VCC = + 5V

620

1200

Quiescent Supply Current
(Per Amplifier)

I

S

VCC = +3V

530

µA

Input Common-Mode Voltage
Range

VCMGuaranteed by CMRR test

VEE - 0.1

VCC - 1.5

V

Input Offset Voltage

VOS0.412mV

Input Offset Voltage
Temperature Coefficient

TC

VOS

7

µV/°C

Input Offset Voltage Matching

MAX4453/MAX4454/MAX4353/MAX4354

±1

mV

Input Bias Current

IB0.83µA

Input Offset Current

IOS0.1

µA

Differential mode,

-0.04V ≤ (V

IN

+ - VIN) ≤ +0.04V

120

kΩ

Input Resistance

R

IN

Common mode,
V

EE

- 0.1V ≤ V

CM

≤ V

CC

- 1.5V

30

MΩ

Common-Mode Rejection Ratio

CMRR

VEE - 0.1V ≤ VCM ≤ V

CC

- 1.5V

60

100

dB

Open-Loop Gain

A

VOL

+0.5V ≤ V

OUT

≤ +4.5V,

R

L

= 1kΩ

6080dB

Sourcing

15

Output Current

I

OUT

RL = 20Ω connected to
V

CC

or V

EE

Sinking

22

mA

VCC - V

OH

180

400

Output Voltage Swing

V

OUTRL

= 1kΩ

VOL - VEE75

350

mV

Sourcing

17

Output Short-Circuit Current

I

SC

Sinking

24

mA

Power-Supply Rejection Ratio

PSRR

VCC = +2.7V to +5.25V, V

CM

= 0,

V

OUT

= 2V

6070dB

MAX4452/MAX4453/MAX4454/MAX4352/MAX4353/MAX4354

Low-Cost, +3V/+5V, 620µA, 200MHz,

Single-Supply Op Amps with Rail-to-Rail Outputs

_______________________________________________________________________________________ 3

AC ELECTRICAL CHARACTERISTICS

(VCC= +5V, VEE= 0, VCM= +1.75V, RL= 1kΩ to VCC/2, A

VCL

= +1V/V (MAX4452/MAX4453/MAX4454), A

VCL

= +5V/V

(MAX4352/MAX4353/MAX4354), T

A

= +25°C, unless otherwise noted.)

PARAMETER

SYMBOL

CONDITIONS

MIN

TYP

MAX

UNITS

MAX4452/MAX4453/
MAX4454

200

Small Signal -3dB Bandwidth

BW

SS

V

OUT

= 100mV

p-p

MAX4352/MAX4353/
MAX4354

80

MHz

MAX4452/MAX4453/
MAX4454

15

Large Signal -3dB Bandwidth

BWLSV

OUT

= 2V

p-p

MAX4352/MAX4353/
MAX4354

38

MHz

MAX4452/MAX4453/
MAX4454

30

Bandwidth for 0.1dB Flatness

BW

0.1dB

V

OUT

= 100mV

p-p

MAX4352/MAX4353/
MAX4354

4

MHz

MAX4452/MAX4453/
MAX4454

95

Slew Rate

SR

V

OUT

= 2V step

MAX4352/MAX4353/
MAX4354

240

V/µs

MAX4452/MAX4453/
MAX4454

20

Rise/Fall Time

t

R, tF

V

OUT

= 2V step

10% to 90%
MAX4352/MAX4353/

MAX4354

8

ns

MAX4452/MAX4453/
MAX4454

40

t

s 1%

V

OUT

= 2V step

MAX4352/MAX4353/
MAX4354

50

MAX4452/MAX4453/
MAX4454

50

Settling Time

t

s 0.1%

V

OUT

= 2V step

MAX4352/MAX4353/
MAX4354

60

ns

MAX4452/MAX4453/MAX4454/MAX4352/MAX4353/MAX4354

Low-Cost, +3V/+5V, 620µA, 200MHz,
Single-Supply Op Amps with Rail-to-Rail Outputs

4 _______________________________________________________________________________________

AC ELECTRICAL CHARACTERISTICS (continued)

(VCC= +5V, VEE= 0, VCM= +1.75V, RL= 1kΩ to VCC/2, A

VCL

= +1V/V (MAX4452/MAX4453/MAX4454), A

VCL

= +5V/V

(MAX4352/MAX4353/MAX4354), T

A

= +25°C, unless otherwise noted.)

PARAMETER

SYMBOL

CONDITIONS

MIN

TYP

MAX

UNITS

MAX4452/MAX4453/
MAX4454

-83

VCC = 5V,
V

OUT

= 2Vp-p,

f

C

= 1MHz

MAX4352/MAX4353/
MAX4354

-74

MAX4452/MAX4453/
MAX4454

-79

Spurious-Free Dynamic
Range

SFDR

VCC = 3V,
V

OUT

= 2Vp-p,

f

C

= 1MHz

MAX4352/MAX4353/
MAX4354

-70

dBc

MAX4452/MAX4453/
MAX4454

-83

VCC = 5V,
V

OUT

= 2Vp-p,

f

C

= 1MHz

MAX4352/MAX4353/
MAX4354

-74

MAX4452/MAX4453/
MAX4454

-79

2nd-Harmonic Distortion

VCC = 3V,
V

OUT

= 1Vp-p,

f

C

= 1MHz

MAX4352/MAX4353/
MAX4354

-70

dBc

MAX4452/MAX4453/
MAX4454

-87

VCC = 5V,
V

OUT

= 2Vp-p,

f

C

= 1MHz

MAX4352/MAX4353/
MAX4354

-74

MAX4452/MAX4453/
MAX4454

-80

3rd-Harmonic Distortion

VCC = 3V,
V

OUT

= 1Vp-p,

f

C

= 1MHz

MAX4352/MAX4353/
MAX4354

-72

dBc

MAX4452/MAX4453/
MAX4454

-82

VCC = 5V,
V

OUT

= 2Vp-p,

f

C

= 1MHz

MAX4352/MAX4353/
MAX4354

-71

MAX4452/MAX4453/
MAX4454

-77

Total Harmonic Distortion

THD

VCC = 3V,
V

OUT

= 1Vp-p,

f

C

= 1MHz

MAX4352/MAX4353/
MAX4354

-68

dB

MAX4452/MAX4453/MAX4454/MAX4352/MAX4353/MAX4354

Low-Cost, +3V/+5V, 620µA, 200MHz,

Single-Supply Op Amps with Rail-to-Rail Outputs

_______________________________________________________________________________________ 5

MAX4452/3/4 toc01

0.40

0.45

0.55

0.50

0.70

0.75

0.65

0.60

0.80

SUPPLY CURRENT (mA)

2.7 3.5 3.93.1

4.3

4.7 5.1 5.5

SUPPLY VOLTAGE (V)

SUPPLY CURRENT vs.

SUPPLY VOLTAGE (PER AMPLIFIER)

3

-7
100k 100M

SMALL-SIGNAL GAIN vs. FREQUENCY

-2

-1

0

1

2

MAX4452/3/4 toc02

FREQUENCY (Hz)

SMALL-SIGNAL GAIN (dB)

1M 10M

-3

-5

-4

-6

1G

MAX4452/MAX4453/
MAX4454

MAX4352/MAX4353/
MAX4354

0.5

-0.5
10k 100k 1M 10M 100M 1G

GAIN FLATNESS vs. FREQUENCY

-0.3

MAX4452/3/4 toc03

FREQUENCY (Hz)

GAIN FLATNESS (dB)

-0.1

0.1

0.3

-0.4

-0.2

0

0.2

0.4

MAX4452/MAX4453/
MAX4454

MAX4352/MAX4353/
MAX4354

Typical Operating Characteristics

(VCC= +5V, VEE= 0, VCM= +1.75V, A

VCL

= +1V/V (MAX4452/MAX4453/MAX4454), A

VCL

= +5V/V (MAX4352/MAX4353/MAX4354),

RL= 1kΩ to VCC/2, CL= 5pF, TA= +25°C, unless otherwise noted.)

Note 1: Units are 100% production tested at T

A

= +25°C. Specifications over temperature limits are guaranteed by design.

Note 2: Guaranteed by design.

AC ELECTRICAL CHARACTERISTICS (continued)

(VCC= +5V, VEE= 0, VCM= +1.75V, RL= 1kΩ to VCC/2, A

VCL

= +1V/V (MAX4452/MAX4453/MAX4454), A

VCL

= +5V/V

(MAX4352/MAX4353/MAX4354), T

A

= +25°C, unless otherwise noted.)

PARAMETER

SYMBOL

CONDITIONS

MIN

TYP

MAX

UNITS

Two-Tone, Third-Order
Intermodulation Distortion

f

1

= 2MHz, f

2

= 2.1MHz

-65

dBc

Input Noise-Voltage Density

enf = 10kHz

15

nV/√Hz

Input Noise-Current Density

inf = 10kHz

0.5

pA/√Hz

Input Capacitance

CIN2

pF

Output Impedance

Z

OUT

f = 1MHz

0.8

Ω

Capacitive Load Drive

22

pF

Crosstalk

X

TALK

MAX4453/MAX4454/MAX4353/MAX4354
V

OUT

= 100mVp-p, f = 1MHz

-74

dB

Power-Up 1% Settling Time
(Note 2)

1

100

µs

MAX4452/MAX4453/MAX4454/MAX4352/MAX4353/MAX4354

Low-Cost, +3V/+5V, 620µA, 200MHz,
Single-Supply Op Amps with Rail-to-Rail Outputs

6 _______________________________________________________________________________________

3

-7
100k 1M 1G

LARGE-SIGNAL GAIN vs. FREQUENCY

-5

-6

-4

-3

-2

0

-1

1

2

MAX4452/3/4 toc04

FREQUENCY (Hz)

LARGE-SIGNAL GAIN (dB)

10M

100M

MAX4452/MAX4453/
MAX4454

MAX4352/MAX4353/
MAX4354

MAX4452/MAX4453/
MAX4454

MAX4352/MAX4353/
MAX4354

V

OUT

= 1Vp-p

3

-7
100k 10M 100M

LARGE-SIGNAL GAIN vs. FREQUENCY

-5

-6

-4

-3

-2

-1

2

1

0

MAX4452/3/4 toc05

FREQUENCY (Hz)

LARGE-SIGNAL GAIN (dB)

1M 1G

V

OUT

= 2Vp-p

MAX4452/MAX4453/
MAX4454

MAX4352/MAX4353/
MAX4354

100

-60

-40

0

-20

40

20

60

80

GAIN (dB)

MAX4452/MAX4453/MAX4454

GAIN AND PHASE vs. FREQUENCY

180

-180

-90

-135

-45

0

45

90

135

10k 1M 10M 100M

FREQUENCY (Hz)

100k 1G

GAIN

PHASE

MAX4452/3/4 toc06

A

VCL

= +1000V/V

100

-60

-40

0

-20

40

20

60

80

GAIN (dB)

MAX4352/MAX4353/MAX4354

GAIN AND PHASE vs. FREQUENCY

180

-180

-90

-135

-45

0

45

90

135

10k 1M 10M 100M

FREQUENCY (Hz)

100k 1G

GAIN

PHASE

MAX4452/3/4 toc07

A

VCL

= +1000V/V

MAX4452/MAX4453/MAX4454

SMALL-SIGNAL PULSE RESPONSE

MAX4452/3/4 toc08

50ns/div

INPUT

50mV/div

OUTPUT
50mV/div

MAX4352/MAX4353/MAX4354

SMALL-SIGNAL PULSE RESPONSE

MAX4452/3/4 toc09

50ns/div

INPUT

10mV/div

OUTPUT

50mV/div

MAX4452/MAX4453/MAX4454

LARGE-SIGNAL PULSE RESPONSE

MAX4452/3/4 toc10

50ns/div

INPUT

500mV/div

OUTPUT

500mV/div

MAX4352/MAX4353/MAX4354

LARGE-SIGNAL PULSE RESPONSE

MAX4452/3/4 toc11

50ns/div

INPUT

100mV/div

OUTPUT

500mV/div

MAX4452/MAX4453/MAX4454

LARGE-SIGNAL PULSE RESPONSE

MAX4452/3/4 toc12

50ns/div

INPUT
1V/div

OUTPUT

1V/div

Typical Operating Characteristics (continued)

(VCC= +5V, VEE= 0, VCM= +1.75V, A

VCL

= +1V/V (MAX4452/MAX4453/MAX4454), A

VCL

= +5V/V (MAX4352/MAX4353/MAX4354),

RL= 1kΩ to VCC/2, CL= 5pF, TA= +25°C, unless otherwise noted.)

MAX4452/MAX4453/MAX4454/MAX4352/MAX4353/MAX4354

Low-Cost, +3V/+5V, 620µA, 200MHz,

Single-Supply Op Amps with Rail-to-Rail Outputs

_______________________________________________________________________________________ 7

MAX4352/MAX4353/MAX4354

LARGE-SIGNAL PULSE RESPONSE

MAX4452/3/4 toc13

50ns/div

INPUT

200mV/div

OUTPUT

1V/div

MAX4452/MAX4453/MAX4454

SMALL-SIGNAL PULSE RESPONSE

MAX4452/3/4 toc14

50ns/div

INPUT
50mV/div

OUTPUT
50mV/div

RL = 150Ω

MAX4352/MAX4353/MAX4354

SMALL-SIGNAL PULSE RESPONSE

MAX4452/3/4 toc15

50ns/div

INPUT

10mV/div

OUTPUT

50mV/div

RL = 150Ω

MAX4452/MAX4453/MAX4454

LARGE-SIGNAL PULSE RESPONSE

MAX4452/3/4 toc16

50ns/div

INPUT

500mV/div

OUTPUT

500mV/div

RL = 150Ω

MAX4352/MAX4353/MAX4354

LARGE-SIGNAL PULSE RESPONSE

MAX4452/3/4 toc17

50ns/div

INPUT

100mV/div

OUTPUT

500mV/div

RL = 150Ω

100k

10M1M 100M 1G

CLOSED-LOOP OUTPUT

IMPEDANCE vs. FREQUENCY

MAX4452/3/4 toc18

FREQUENCY (Hz)

OUTPUT IMPEDANCE (Ω)

1000

0.1

1

10

100

0

10k 100k 1M 10M 100M 1G

-10

-30

-20

-40

-50

-60

-70

-90

MAX4452/3/4 toc19

FREQUENCY (Hz)

CROSSTALK (dB)

CROSSTALK vs. FREQUENCY

-80

100 1k 10k 100k

MAX4452/3/4 toc20

R

LOAD

(Ω)

OPEN-LOOP GAIN (dB)

120

0

20

40

60

80

100

OPEN-LOOP GAIN

vs. LOAD RESISTANCE

100k 1M 10M 1G

FREQUENCY (Hz)

PSR (dB)

0

-90

-60

-70

-80

-50

-30

-40

-10

-20

POWER-SUPPLY REJECTION

vs. FREQUENCY

100M

MAX4452/3/4 toc21

Typical Operating Characteristics (continued)

(VCC= +5V, VEE= 0, VCM= +1.75V, A

VCL

= +1V/V (MAX4452/MAX4453/MAX4454), A

VCL

= +5V/V (MAX4352/MAX4353/MAX4354),

RL= 1kΩ to VCC/2, CL= 5pF, TA= +25°C, unless otherwise noted.)

MAX4452/MAX4453/MAX4454/MAX4352/MAX4353/MAX4354

Low-Cost, +3V/+5V, 620µA, 200MHz,
Single-Supply Op Amps with Rail-to-Rail Outputs

8 _______________________________________________________________________________________

100k 1M 10M 1G

MAX4452/3/4 toc22

FREQUENCY (Hz)

CMR (dB)

-40

-90

-80

-70

-60

-50

COMMON-MODE REJECTION

vs. FREQUENCY

100M

-110

-100

1000

10

1 1k 10k 100k10 100 1M

VOLTAGE NOISE DENSITY

vs. FREQUENCY

100

MAX4452/3/4 toc23

FREQUENCY (Hz)

VOLTAGE NOISE (nV/√Hz)

100

0

CURRENT NOISE DENSITY

vs. FREQUENCY

10

MAX4452/3/4 toc24

CURRENT NOISE DENSITY (pA/√Hz)

1

1 1k 10k 100k10 100 1M

FREQUENCY (Hz)

-10

-100
100k 100M10M1M

MAX4452/MAX4453/MAX4454

DISTORTION vs. FREQUENCY

-70

-90

-30

-50

0

-60

-80

-20

-40

MAX4452/3/4 toc25

DISTORTION (dBc)

V

OUT

= 1Vp-p

2ND HARMONIC

3RD HARMONIC

FREQUENCY (Hz)

-10

-90

-100
100k 100M10M1M

MAX4352/MAX4353/MAX4354

DISTORTION vs. FREQUENCY

-70

-30

-50

0

-60

-80

-20

-40

MAX4452/3/4 toc26

FREQUENCY (Hz)

DISTORTION (dBc)

V

OUT

= 2Vp-p

2ND HARMONIC

3RD HARMONIC

-100

-80

-90

-60

-70

-50

-40

0 1.5 2.00.5 1.0 2.5 3.0 3.5

MAX4452/MAX4453/MAX4454

DISTORTION vs. OUTPUT VOLTAGE

MAX4452/3/4 toc27

OUTPUT VOLTAGE (Vp-p)

DISTORTION (dBc)

2ND HARMONIC

3RD HARMONIC

f = 1MHz

-100

-80

-90

-60

-70

-50

-40

0 1.5 2.00.5 1.0 2.5 3.0 3.5

MAX4352/MAX4353/MAX4354

DISTORTION vs. OUTPUT VOLTAGE

MAX4452/3/4 toc28

OUTPUT VOLTAGE (Vp-p)

DISTORTION (dBc)

2ND HARMONIC

3RD HARMONIC

f = 1MHz

-40

-100
100 1k 10k

MAX4452/MAX4453/MAX4454

DISTORTION vs. OUTPUT RESISTANCE

-80

MAX4452/3/4 toc29

R

LOAD

(Ω)

DISTORTION (dBc)

-70

-60

-50

-90

V

OUT

= 1Vp-p, f = 1MHz

2ND HARMONIC

3RD HARMONIC

-40

-100
100 1k 10k

MAX4352/MAX4353/MAX4354

DISTORTION vs. OUTPUT RESISTANCE

-80

MAX4452/3/4 toc30

R

LOAD

(Ω)

DISTORTION (dBc)

-70

-60

-50

-90

V

OUT

= 2Vp-p, f = 1MHz

2ND HARMONIC

3RD HARMONIC

Typical Operating Characteristics (continued)

(VCC= +5V, VEE= 0, VCM= +1.75V, A

VCL

= +1V/V (MAX4452/MAX4453/MAX4454), A

VCL

= +5V/V (MAX4352/MAX4353/MAX4354),

RL= 1kΩ to VCC/2, CL= 5pF, TA= +25°C, unless otherwise noted.)

MAX4452/MAX4453/MAX4454/MAX4352/MAX4353/MAX4354

Low-Cost, +3V/+5V, 620µA, 200MHz,

Single-Supply Op Amps with Rail-to-Rail Outputs

_______________________________________________________________________________________ 9

10

14

12

18

16

22

20

24

28

26

30

0 50 100 150

ISOLATION RESISTANCE

vs. CAPACITIVE LOAD

MAX4452/3/4 toc31

C

LOAD

(pF)

R

ISO

(Ω)

MAX4452/MAX4453/MAX4454

POWER-UP TIME

MAX4452/3/4 toc32

500ns/div

V

SUPPLY

V

OUT

5V

0

1.5V

0

MAX4352/MAX4353/MAX4354

POWER-UP TIME

MAX4452/3/4 toc33

500ns/div

V

SUPPLY

V

OUT

5V

0

1.5V

0

0

0.3

0.2

0.1

0.4

0.5

0.6

0.7

0.8

0.9

1.0

-50 0-25 255075100

MAX4452/3/4 toc34

TEMPERATURE (°C)

SUPPLY CURRENT (mA)

SUPPLY CURRENT vs. TEMPERATURE

(PER AMPLIFIER)

-200

-100

-150

50

0

-50

150

100

200

-50 -5 10-35 -20 25 40 55 70 85

INPUT BIAS CURRENT

vs. TEMPERATURE

MAX4452/3/4 toc35

TEMPERATURE (°C)

INPUT BIAS CURRENT (µA)

-0.10

-0.06

-0.08

-0.02

-0.04

0.02

0

0.04

0.08

0.06

0.10

-50 -20 -5 10-35 25 40 55 70 85

MAX4452/3/4 toc36

TEMPERATURE (°C)

INPUT OFFSET CURRENT (µA)

INPUT OFFSET CURRENT

vs. TEMPERATURE

-2.0

-1.0

-1.5

0.5

0

-0.5

1.5

1.0

2.0

-50 -5 10-35 -20 25 40 55 70 85

MAX4452/3/4 toc37

TEMPERATURE (°C)

INPUT OFFSET VOLTAGE (mV)

INPUT OFFSET VOLTAGE

vs. TEMPERATURE

0

50

100

150

200

250

-50 -5 10-35 -20 25 40 55 70 85

MAX4452/3/4 toc38

TEMPERATURE (°C)

OUTPUT VOLTAGE SWING (mV)

OUTPUT VOLTAGE SWING

vs. TEMPERATURE

V

OH

V

OL

Typical Operating Characteristics (continued)

(VCC= +5V, VEE= 0, VCM= +1.75V, A

VCL

= +1V/V (MAX4452/MAX4453/MAX4454), A

VCL

= +5V/V (MAX4352/MAX4353/MAX4354),

RL= 1kΩ to VCC/2, CL= 5pF, TA= +25°C, unless otherwise noted.)

MAX4452/MAX4453/MAX4454/MAX4352/MAX4353/MAX4354

Low-Cost, +3V/+5V, 620µA, 200MHz,
Single-Supply Op Amps with Rail-to-Rail Outputs

10 ______________________________________________________________________________________

Pin Description

PIN

MAX4452
MAX4352

MAX4453
MAX4353

MAX4454
MAX4354

NAME FUNCTION

1 ——OUT Amplifier Output

2 4 11 V

EE

Negative Power Supply

3 ——IN+ Noninverting Amplifier Input

4 ——IN- Inverting Amplifier Input

584V

CC

Positive Power Supply

— 1 1 OUTA Amplifier A Output

— 2 2 INA- Amplifier A Inverting Input

— 3 3 INA+ Amplifier A Noninverting Input

— 7 7 OUTB Amplifier B Output

— 6 6 INB- Amplifier B Inverting Input

— 5 5 INB+ Amplifier B Noninverting Input

——8 OUTC Amplifier C Output

——9 INC- Amplifier C Inverting Input

——10 INC+ Amplifier C Noninverting Input

——14 OUTD Amplifier D Output

——13 IND- Amplifier D Inverting Input

——12 IND+ Amplifier D Noninverting Input

MAX4452/MAX4453/MAX4454/MAX4352/MAX4353/MAX4354

Low-Cost, +3V/+5V, 620µA, 200MHz,

Single-Supply Op Amps with Rail-to-Rail Outputs

______________________________________________________________________________________ 11

Detailed Description

The MAX4452/MAX4352 single, MAX4453/MAX4353
dual, and MAX4454/MAX4354 quad, single-supply, rail­to-rail, voltage-feedback amplifiers achieve high slew
rates and wide bandwidths while consuming only
620µA per amplifier. Excellent speed/power ratio
makes them ideal for portable devices and high-fre­quency signal applications.

Internal feedback around the output stage ensures low
open-loop output impedance, reducing gain sensitivity
to load variations. This feedback also produces
demand-driven current bias to the output transistors.

Rail-to-Rail Outputs, Ground-Sensing Input

The input common-mode range extends from (VEE-

0.1V) to (VCC- 1.5V) with excellent common-mode
rejection. Beyond this range, the amplifier output is a
nonlinear function of the input, but does not undergo
phase reversal or latchup.

The output swings to within 180mV of either power-sup­ply rail with a 1kΩ load. The input ground-sensing and
the rail-to-rail output substantially increase the dynamic
range.

Output Capacitive Loading and Stability

The MAX4452/MAX4453/MAX4454/MAX4352/MAX4353/
MAX4354 are optimized for AC performance. They are
not designed to drive highly reactive loads. Such loads
decrease phase margin and may produce excessive
ringing and oscillation. The use of an isolation resistor
eliminates this problem (Figure 1). Figure 2 is a graph
of the Optimal Isolation Resistor (R

ISO

) vs. Capacitive

Load.

Applications Information

Choosing Resistor Values

Unity-Gain Configuration

The MAX4452/MAX4453/MAX4454 are internally com­pensated for unity gain. When configured for unity gain,
a 24Ω feedback resistor (R

F

) is recommended. This
resistor improves AC response by reducing the Q of
the parallel LC circuit formed by the parasitic feedback
capacitance and inductance.

Inverting and Noninverting Configurations

Select the gain-setting feedback (R

F

) and input (RG)
resistor values that best fit the application. Large resis­tor values increase voltage noise and interact with the
amplifier’s input and PC board capacitance. This can
generate undesirable poles and zeros and decrease
bandwidth or cause oscillations. For example, a nonin­verting gain-of-two configuration (RF= RG) using 1kΩ

resistors, combined with 2pF of amplifier input capaci­tance and 1pF of PC board capacitance, causes a pole
at 106MHz. Since this pole is within the amplifier band­width, it jeopardizes stability. Reducing the 1kΩ resis-
tors to 100Ω extends the pole frequency to 1.06GHz,
but could limit output swing by adding 200Ω in parallel
with the amplifier’s load resistor.

Note: For high-gain applications where output offset
voltage is a consideration, choose RS to be equal to
the parallel combination of RF and RG (Figures 3a and
3b).

3b):

R

S

RFR

G

RFR

G

=

×
+

Figure 2. Optimal Isolation Resistor vs. Capacitive Load

V

OUT

V

IN

R

BIN

R

ISO

R

F

C

L

R

G

Figure 1. Driving a Capacitive Load Through an Isolation
Resistor

10

14

12

18

16

22

20

24

28

26

30

0 50 100 150

ISOLATION RESISTANCE

vs. CAPACITIVE LOAD

MAX4452/3/4 toc39

C

LOAD

(pF)

R

ISO

(Ω)

MAX4452/MAX4453/MAX4454/MAX4352/MAX4353/MAX4354

Low-Cost, +3V/+5V, 620µA, 200MHz,
Single-Supply Op Amps with Rail-to-Rail Outputs

12 ______________________________________________________________________________________

Active Filters

The low distortion and high bandwidth of the
MAX4452/MAX4453/MAX4454 and MAX4352/
MAX4353/MAX4354 make them ideal for use in active
filter circuits. Figure 4 is a 15MHz lowpass multiple
feedback active filter using the MAX4452.

ADC Input Buffer

Input buffer amplifiers can be a source of significant
errors in high-speed ADC applications. The input buffer
is usually required to rapidly charge and discharge the
ADC’s input, which is often capacitive. See Output
Capacitive Loading and Stability. In addition, since a
high-speed ADC’s input impedance often changes very
rapidly during the conversion cycle, measurement
accuracy must be maintained using an amplifier with
very low output impedance at high frequencies. The
combination of high speed, fast slew rate, low noise,
and a low and stable distortion over load makes the
MAX4452/MAX4453/MAX4454/MAX4352/MAX4353/
MAX4354 ideally suited for use as buffer amplifiers in
high-speed ADC applications.

Layout and Power-Supply Bypassing

These amplifiers operate from a single +2.7V to +5.25V
power supply. Bypass VCCto ground with a 0.1µF
capacitor as close to the pin as possible.

Maxim recommends using microstrip and stripline tech­niques to obtain full bandwidth. Design the PC board
for a frequency greater than 1GHz to prevent amplifier
performance degradation due to board parasitics.
Avoid large parasitic capacitance at inputs and out­puts. Whether or not a constant-impedance board is
used, observe the following guidelines:

• Do not use wirewrap boards due to their high induc­tance.

• Do not use IC sockets because of the increased
parasitic capacitance and inductance.

Gain

R2

R1

0

1

2p1R2 R3 C1 C2

C2

C1 C2 R2 R3

1R11R21

R3

=

ƒ

=

×××

=

×××

++

-

Q

IN

R

S

R

F

R

G

V

OUT

R

O

V

OUT

= (RF / RG) V

IN

Figure 3b. Inverting Gain Configuration

V

OUT

= [1+ (RF / RG)] V

IN

IN

R

S

R

F

R

G

V

OUT

R

O

Figure 3a. Noninverting Gain Configuration

V

IN

V

OUT

C1
100pF

R2
150Ω

C2
15pF

R3

R1

511Ω

150Ω

10kΩ

10kΩ

+5.0V

Figure 4. Multiple-Feedback Lowpass Filter

MAX4452/MAX4453/MAX4454/MAX4352/MAX4353/MAX4354

Low-Cost, +3V/+5V, 620µA, 200MHz,

Single-Supply Op Amps with Rail-to-Rail Outputs

______________________________________________________________________________________ 13

MAX4452/MAX4453/MAX4454/MAX4352/MAX4353/MAX4354

• Use surface-mount instead of through-hole compo­nents for better high-frequency performance.

• Use a PC board with at least two layers; it should be
as free from voids as possible.

• Keep signal lines as short and as straight as possi­ble. Do not make 90° turns; round all corners.

____________________Chip Information

MAX4452/MAX4352 TRANSISTOR COUNT: 97

MAX4453/MAX4353 TRANSISTOR COUNT: 192

MAX4454/MAX4354 TRANSISTOR COUNT: 378

PROCESS: Bipolar

TOP VIEW

V

EE

IN-IN+

15V

CC

OUT

MAX4452
MAX4352

SOT23/SC70

2

34

INB-

INB+V

EE

1

2

87V

CC

OUTBINA-

INA+

OUTA

THIN SOT23/SOT23/SO

3

4

6

5

MAX4453
MAX4353

14

13

12

11

10

9

8

1

2

3

4

5

6

7

OUTD

IND-

IND+

V

EE

V

CC

INA+

INA-

OUTA

MAX4454
MAX4354

INC+

INC-

OUTCOUTB

INB-

INB+

TSSOP/SO

Pin Configurations

MAX4452/MAX4453/MAX4454/MAX4352/MAX4353/MAX4354

Low-Cost, +3V/+5V, 620µA, 200MHz,
Single-Supply Op Amps with Rail-to-Rail Outputs

14 ______________________________________________________________________________________

SC70, 5L.EPS

PACKAGE OUTLINE, 5L SC70

21-0076

1

1

C

Package Information

(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information
go to www.maxim-ic.com/packages

.)

MAX4452/MAX4453/MAX4454/MAX4352/MAX4353/MAX4354

Low-Cost, +3V/+5V, 620µA, 200MHz,

Single-Supply Op Amps with Rail-to-Rail Outputs

______________________________________________________________________________________ 15

SOICN .EPS

PACKAGE OUTLINE, .150" SOIC

1

1

21-0041

B

REV.DOCUMENT CONTROL NO.APPROVAL

PROPRIETARY INFORMATION

TITLE:

TOP VIEW

FRONT VIEW

MAX

0.010

0.069

0.019

0.157

0.010

INCHES

0.150

0.007

E

C

DIM

0.014

0.004

B

A1

MIN

0.053A

0.19

3.80 4.00

0.25

MILLIMETERS

0.10

0.35

1.35

MIN

0.49

0.25

MAX

1.75

0.050

0.016L

0.40 1.27

0.3940.386D

D

MINDIM

D

INCHES

MAX

9.80 10.00

MILLIMETERS

MIN

MAX

16

AC

0.337 0.344 AB8.758.55 14

0.189 0.197 AA5.004.80 8

N MS012

N

SIDE VIEW

H 0.2440.228 5.80 6.20

e 0.050 BSC 1.27 BSC

C

HE

e

B

A1

A

D

0-8

L

1

VARIATIONS:

Package Information (continued)

(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information
go to www.maxim-ic.com/packages

.)

MAX4452/MAX4453/MAX4454/MAX4352/MAX4353/MAX4354

Low-Cost, +3V/+5V, 620µA, 200MHz,
Single-Supply Op Amps with Rail-to-Rail Outputs

16 ______________________________________________________________________________________

SOT-23 5L .EPS

E

1

1

21-0057

PACKAGE OUTLINE, SOT-23, 5L

Package Information (continued)

(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information
go to www.maxim-ic.com/packages

.)

MAX4452/MAX4453/MAX4454/MAX4352/MAX4353/MAX4354

Low-Cost, +3V/+5V, 620µA, 200MHz,

Single-Supply Op Amps with Rail-to-Rail Outputs

______________________________________________________________________________________ 17

Package Information (continued)

(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information
go to www.maxim-ic.com/packages

.)

SOT23, 8L .EPS

REV.DOCUMENT CONTROL NO.APPROVAL

PROPRIETARY INFORMATION

TITLE:

3.002.60E

C

E1

E

BETWEEN 0.08mm AND 0.15mm FROM LEAD TIP.

8. MEETS JEDEC MO178.

8

0.60

1.75

0.30

L2

0

e1

e

L

1.50E1

0.65 BSC.

1.95 REF.

0.25 BSC.

GAUGE PLANE

SEATING PLANE C

C

L

PIN 1

I.D. DOT

(SEE NOTE 6)

L

C

L

C

A2

e1

D

DETAIL "A"

5. COPLANARITY 4 MILS. MAX.

NOTE:

7. SOLDER THICKNESS MEASURED AT FLAT SECTION OF LEAD

6. PIN 1 I.D. DOT IS 0.3 MM MIN. LOCATED ABOVE PIN 1.

4. PACKAGE OUTLINE INCLUSIVE OF SOLDER PLATING.

3. PACKAGE OUTLINE EXCLUSIVE OF MOLD FLASH & METAL BURR.

HEEL OF THE LEAD PARALLEL TO SEATING PLANE C.

2. FOOT LENGTH MEASURED FROM LEAD TIP TO UPPER RADIUS OF

1. ALL DIMENSIONS ARE IN MILLIMETERS.

L2

L

A1

A

0.45

1.30

0.15

1.45

MAX

0.28b

0.90A2

0.00A1

0.90

A

MIN

SYMBOL

3.00

0.20

2.80D

0.09

C

SEE DETAIL "A"

L

C

b

e

D

1

21-0078

1

PACKAGE OUTLINE, SOT-23, 8L BODY

0

0

MAX4452/MAX4453/MAX4454/MAX4352/MAX4353/MAX4354

Low-Cost, +3V/+5V, 620µA, 200MHz,
Single-Supply Op Amps with Rail-to-Rail Outputs

18 ______________________________________________________________________________________

Package Information (continued)

(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information
go to www.maxim-ic.com/packages

.)

TSSOP4.40mm.EPS

Low-Cost, +3V/+5V, 620µA, 200MHz,

Single-Supply Op Amps with Rail-to-Rail Outputs

Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.

19 ____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600

© 2005 Maxim Integrated Products Printed USA is a registered trademark of Maxim Integrated Products.

MAX4452/MAX4453/MAX4454/MAX4352/MAX4353/MAX4354

Package Information (continued)

(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information
go to www.maxim-ic.com/packages

.)

8LTHIN SOT.EPS