The MAX4310–MAX4315 single-supply mux-amps combine high-speed operation, low-glitch switching, and
excellent video specifications. The six products in this
family are differentiated by the number of multiplexer
inputs and the gain configuration. The MAX4310/
MAX4311/MAX4312 integrate 2-/4-/8-channel multiplexers, respectively, with an adjustable gain amplifier optimized for unity-gain stability. The MAX4313/MAX4314/
MAX4315 integrate 2-/4-/8-channel multiplexers, respectively, with a +2V/V fixed-gain amplifier. All devices have
40ns channel switching time and low 10mVp-p switching
transients, making them ideal for video-switching applications. They operate from a single +4V to +10.5V supply,
or from dual supplies of ±2V to ±5.25V, and they feature
rail-to-rail outputs and an input common-mode voltage
range that extends to the negative supply rail.
The MAX4310/MAX4311/MAX4312 have a -3dB bandwidth of 280MHz/345MHz/265MHz and up to a 460V/µs
slew rate. The MAX4313/MAX4314/MAX4315, with
150MHz/127MHz/97MHz -3dB bandwidths up to a
540V/µs slew rate, and a fixed gain of +2V/V, are ideally
suited for driving back-terminated cables. Quiescent supply current is as low as 6.1mA, while low-power shutdown
mode reduces supply current to as low as 560µA and
places the outputs in a high-impedance state. The
MAX4310–MAX4315’s internal amplifiers maintain an
open-loop output impedance of only 8Ω
over the full output voltage range, minimizing the gain error and bandwidth changes under loads typical of most rail-to-rail
amplifiers. With differential gain and phase errors of
0.06% and 0.08°, respectively, these devices are ideal for
broadcast video applications.
♦ Single-Supply Operation Down to +4V
♦ 345MHz -3dB Bandwidth (MAX4311)
150MHz -3dB Bandwidth (MAX4313)
♦ 540V/µs Slew Rate (MAX4313)
♦ Low 6.1mA Quiescent Supply Current
♦ 40ns Channel Switching Time
♦ Ultra-Low 10mVp-p Switching Transient
♦ 0.06%/0.08° Differential Gain/Phase Error
♦ Rail-to-Rail Outputs: Drives 150Ω to within
730mV of the Rails
♦ Input Common-Mode Range Includes
Negative Rail
♦ Low-Power Shutdown Mode
♦ Available in Space-Saving 8-Pin µMAX®and
16-Pin QSOP Packages
________________________Applications
Video Signal Multiplexing
Video Crosspoint Switching
Flash ADC Input Buffers
Video Cable Drivers
75Ω
High-Speed Signal Processing
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
to GND, VCCor VEE)....Continuous
OUT
- 0.3V) to (VCC+ 0.3V)
EE
0.3V) to (V
-
EE
= +70°C)
A
CC
+
0.3V)
14-Pin SO (derate 8.3mW/°C above +70°C).................667mW
16-Pin SO (derate 8.7mW/°C above +70°C).................696mW