MAX3680/MAX3680A
+3.3V, 622Mbps, SDH/SONET
1:8 Deserializer with TTL Outputs
2 _______________________________________________________________________________________
ABSOLUTE MAXIMUM RATINGS
DC ELECTRICAL CHARACTERISTICS
(VCC= +3.0V to +3.6V, TA= -40°C to +85°C, unless otherwise noted. Typical values are at VCC= +3.3V, TA= +25°C.)
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
Note 2: AC characteristics guaranteed by design and characterization.
Note 1: The SYNC input is available only on the MAX3680.
Terminal Voltage (with respect to GND)
V
CC
........................................................................-0.5V to +5V
PECL Inputs (SD+/-, SCLK+/-) ................-0.5V to (V
CC
+ 0.5V)
TTL Input (SYNC) ....................................-0.5V to (V
CC
+ 0.5V)
TTL Outputs (PCLK, PD_)........................-0.5V to (V
CC
+ 0.5V)
Continuous Power Dissipation (T
A
= +85°C)
SSOP (derate 9.52mW/°C above +85°C) .....................619mW
Operating Temperature Range ...........................-40°C to +85°C
Storage Temperature Range .............................-65°C to +160°C
Lead Temperature (soldering, 10s) .................................+300°C
TTL outputs = high
VIN= V
IL(MAX)
VIN= V
IH(MAX)
VIN= V
IH(MAX)
VIN= V
IL(MAX)
Output sinking = 400µA
Output sourcing = 400µA
CONDITIONS
V0 0.44V
OL
Output Low Voltage
V2.4 V
CC
V
OH
Output High Voltage
VVCC- 1.16 VCC- 0.88V
IH
Input High Voltage
mA25 50 90I
CC
Supply Current
µA-10 10I
IL
Input Low Current
µA-10 10I
IH
Input High Current
V0.8V
IL
Input Low Voltage
V2.0V
IH
Input High Voltage
VVCC- 1.81 VCC- 1.48V
IL
Input Low Voltage
µA-10 10I
IH
Input High Current
µA-10 10I
IL
Input Low Current
UNITSMIN TYP MAXSYMBOLPARAMETER
CONDITIONS
ps50t
H
Serial Data Hold Time
ps800t
SU
MHz622f
SCLK
Maximum Serial Clock Frequency
Serial Data Setup Time
UNITSMIN TYP MAXSYMBOLPARAMETER
PECL INPUTS (SD+/-, SCLK+/-)
TTL INPUT AND OUTPUTS (SYNC, PCLK, PD_) (Note 1)
AC ELECTRICAL CHARACTERISTICS
(VCC= +3.0V to +3.6V, TA= +25°C, unless otherwise noted.) (Note 2)
VCC= +3.3V, CL= 18pF ps-200 500 2000t
CLK-Q
Parallel Clock to Data Output Delay