1.5 5TA= +25°C
MAX338/MAX339
8-Channel/Dual 4-Channel,
Low-Leakage, CMOS Analog Multiplexers
2 _______________________________________________________________________________________
ABSOLUTE MAXIMUM RATINGS
ELECTRICAL CHARACTERISTICS—Dual Supplies
(V+ = +15V, V- = -15V, GND = 0V, VAH= +2.4V, VAL= +0.8V, TA= T
MIN
to T
MAX
, unless otherwise noted.)
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
Voltage Referenced to V-
V+ ............................................................................-0.3V, 44V
GND.........................................................................-0.3V, 25V
Digital Inputs, NO, COM (Note 1)...........(V- - 2V) to (V+ + 2V) or
30mA (whichever occurs first)
Continuous Current (any terminal)......................................30mA
Peak Current, NO or COM
(pulsed at 1ms, 10% duty cycle max) ..........................100mA
Continuous Power Dissipation (TA = +70°C)
Plastic DIP (derate 10.53mW/°C above +70°C) ..........842mW
Narrow SO (derate 8.70mW/°C above +70°C) ............696mW
CERDIP (derate 10.00mW/°C above +70°C)...............800mW
Operating Temperature Ranges
MAX33_C__ ........................................................0°C to +70°C
MAX33_E__......................................................-40°C to +85°C
MAX33_MJE ..................................................-55°C to +125°C
Storage Temperature Range.............................-65°C to +150°C
Lead Temperature (soldering, 10sec).............................+300°C
V
COM
= ±10V,
VNO= ±10V,
sequence
each switch
on
VNO= +10V,
V
COM
= ±10V,
V
EN
= 0V
V
COM
= +10V,
VNO= ±10V,
VEN= 0V
INO= 0.2mA,
V
COM
= ±10V
VNO= ±10V,
V
COM
= +10V,
V
EN
= 0V
CONDITIONS
nA
-20 20
I
COM(ON)
COM-On Leakage Current
(Note 5)
-1.65 1.65
-0.05 0.008 0.05
-40 40
-3.25 3.25
-0.05 0.006 0.05
nA
-20 20
I
COM(OFF)
COM-Off Leakage Current
(Note 5)
-1.65 1.65
-0.05 0.005 0.05
-40 40
220 400
-3.25 3.25
-0.05 0.005 0.05
nA
-20 20
I
NO(OFF)
NO-Off Leakage Current
(Note 5)
-1.25 1.25
Ω
500
R
ON
On-Resistance
UNITS
MIN TYP MAX
(Note 2)
SYMBOLPARAMETER
Note 1: Signals on NO, COM, EN, A0, A1, or A2 exceeding V+ or V- are clamped by internal diodes. Limit forward current to
maximum current ratings.
V-15 15
VNO,
V
COM
Analog Signal Range
INO= 0.2mA,
V
COM
= ±10V (Note 4)
Ω
410
∆R
ON
On-Resistance Matching
Between Channels
(Note 3)
TA= +25°C
TA= T
MIN
to T
MAX
TA= +25°C
-0.02 0.001 0.02TA= +25°C
TA= T
MIN
to T
MAX
TA= +25°C
TA= T
MIN
to T
MAX
TA= +25°C
TA= T
MIN
to T
MAX
TA= +25°C
TA= T
MIN
to T
MAX
TA= +25°C
TA= T
MIN
to T
MAX
MAX339
MAX338
MAX339
MAX338
C, E
M
C, E
M
C, E
M
C, E
M
C, E
M
SWITCH
TA= T
MIN
to T
MAX
15