MAXIM MAX211, MAX213 Technical data

General Description
The MAX200–MAX211/MAX213 transceivers are designed for RS-232 and V.28 communication inter­faces where ±12V supplies are not available. On-board charge pumps convert the +5V input to the ±10V need­ed for RS-232 output levels. The MAX201 and MAX209 operate from +5V and +12V, and contain a +12V to
meet all EIA/TIA-232E and CCITT V.28 specifications at a data rate of 20kbps. The drivers maintain the ±5V EIA/TIA-232E output signal levels at data rates in excess of 120kbps when loaded in accordance with the EIA/TIA-232E specification.
The 5µW shutdown mode of the MAX200, MAX205, MAX206, and MAX211 conserves energy in battery­powered systems. The MAX213 has an active-low shut­down and an active-high receiver enable control. Two receivers of the MAX213 are active, allowing ring indica­tor (RI) to be monitored easily using only 75µW power.
The MAX211 and MAX213 are available in a 28-pin wide small-outline (SO) package and a 28-pin shrink small-outline (SSOP) package, which occupies only 40% of the area of the SO. The MAX207 is now avail­able in a 24-pin SO package and a 24-pin SSOP. The MAX203 and MAX205 use no external components, and are recommended for applications with limited circuit board space.
Applications
Computers
Laptops, Palmtops, Notebooks Battery-Powered Equipment Hand-Held Equipment
Next-Generation Device Features
For Low-Cost Applications:
MAX221E: ±15kV ESD-Protected, +5V, 1µA, Single RS-232 Transceiver with AutoShutdown™
For Low-Voltage and Space-Constrained
Applications: MAX3222E/MAX3232E/MAX3237E/MAX3241E/ MAX3246E: ±15kV ESD-Protected, Down to 10nA, +3.0V to +5.5V, Up to 1Mbps, True RS-232 Transceivers (MAX3246E Available in UCSP™ Package)
For Space-Constrained Applications:
MAX3228E/MAX3229E: ±15kV ESD-Protected, +2.5V to +5.5V, RS-232 Transceivers in UCSP
For Low-Voltage or Data Cable Applications:
MAX3380E/MAX3381E: +2.35V TO +5.5V, 1µA, 2Tx/2Rx RS-232 Transceivers with ±15kV ESD­Protected I/O and Logic Pins
For Low-Power Applications:
MAX3224E–MAX3227E/MAX3244E/MAX3245E: ±15kV ESD-Protected, 1µA, 1Mbps, +3.0V to +5.5V, RS-232 Transceivers with AutoShutdown Plus™
MAX200–MAX211/MAX213
+5V, RS-232 Transceivers
with 0.1µF External Capacitors
________________________________________________________________ Maxim Integrated Products 1
19-0065; Rev 6; 10/03
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at 1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.
Part
Number
Power-Supply
Voltage (V)
No. of RS-
No. of
RS-232
No. of
Receivers Active
in Shutdown
No. of External
Capacitors
(0.1µF)
Low-Power
Shutdown/
TTL Three-State
MAX200 +5 5 0 0 4 Yes/No MAX201
2 2 0 2 No/No MAX202 +5 2 2 0 4 No/No MAX203 +5 2 2 0 None No/No MAX204 +5 4 0 0 4 No/No MAX205 +5 5 5 0 None Yes/Yes MAX206 +5 4 3 0 4 Yes/Yes MAX207 +5 5 3 0 4 No/No MAX208 +5 4 4 0 4 No/No MAX209
3 5 0 2 No/Yes MAX211 +5 4 5 0 4 Yes/Yes MAX213 +5 4 5 2 4 Yes/Yes
Selector Guide
Ordering Information appears at end of data sheet
AutoShutdown, AutoShutdown Plus, and UCSP are trademarks of Maxim Integrated Products, Inc.
232 Drivers
+5 and +9.0 to +13.2
+5 and +9.0 to +13.2
Receivers
MAX200–MAX211/MAX213
+5V, RS-232 Transceivers
with 0.1µF External Capacitors
______________________________________________________________________________________ 19
Ordering Information
PART TEMP RANGE PIN-PACKAGE
MAX206EWG -40°C to +85°C 24 Wide SO MAX206EAG -40°C to +85°C 24 SSOP MAX207CNG 0°C to +70°C 24 Narrow Plastic Dip MAX207CWG 0°C to +70°C 24 Wide SO MAX207CAG 0°C to +70°C 24 SSOP MAX207ENG -40°C to +85°C 24 Narrow Plastic Dip MAX207EWG -40°C to +85°C 24 Wide SO MAX207EAG -40°C to +85°C 24 SSOP MAX208CNG 0°C to +70°C 24 Narrow Plastic Dip MAX208CWG 0°C to +70°C 24 Wide SO MAX208CAG 0°C to +70°C 24 SSOP MAX208C/D 0°C to +70°C Dice* MAX208ENG -40°C to +85°C 24 Narrow Plastic Dip MAX208EWG -40°C to +85°C 24 Wide SO MAX208EAG -40°C to +85°C 24 SSOP MAX209CNG 0°C to +70°C 24 Narrow Plastic Dip MAX209CWG 0°C to +70°C 24 Wide SO MAX209C/D 0°C to +70°C Dice* MAX209ENG -40°C to +85°C 24 Narrow Plastic Dip MAX209EWG -40°C to +85°C 24 Wide SO MAX211CWI 0°C to +70°C 28 Wide SO MAX211CAI 0°C to +70°C 28 SSOP MAX211C/D 0°C to +70°C Dice* MAX211EWI -40°C to +85°C 28 Wide SO MAX211EAI -40°C to +85°C 28 SSOP MAX213CWI 0°C to +70°C 28 Wide SO MAX213CAI 0°C to +70°C 28 SSOP MAX213C/D 0°C to +70°C Dice* MAX213EWI -40°C to +85°C 28 Wide SO MAX213EAI -40°C to +85°C 28 SSOP
*Contact factory for dice specifications.
PART TEMP RANGE PIN-PACKAGE
MAX200CPP 0°C to +70°C 20 Plastic Dip
MAX200CWP 0°C to +70°C 20 Wide SO MAX200EPP -40°C to +85°C 20 Plastic Dip MAX200EWP -40°C to +85°C 20 Wide SO MAX201CPD 0°C to +70°C 14 Plastic Dip MAX201CWE 0°C to +70°C 16 Wide SO MAX201C/D 0°C to +70°C Dice* MAX201EPD -40ºC to +85°C 14 Plastic Dip MAX201EWE -40ºC to +85°C 16 Wide SO MAX202CPE 0°C to +70°C 16 Plastic Dip MAX202CSE 0°C to +70°C 16 Narrow SO MAX202CWE 0°C to +70°C 16 Wide SO MAX202C/D 0°C to +70°C Dice* MAX202EPE -40ºC to +85°C 16 Plastic Dip MAX202ESE -40ºC to +85°C 16 Narrow SO MAX202EWE -40ºC to +85°C 16 Wide SO MAX203CPP 0°C to +70°C 20 Plastic Dip MAX203CWP 0°C to +70°C 20 Wide SO MAX203EPP -40°C to +85°C 20 Plastic Dip MAX203EWP -40°C to +85°C 20 Wide SO MAX204CPE 0°C to +70°C 16 Plastic Dip MAX204CWE 0°C to +70°C 16 Wide SO MAX204C/D 0°C to +70°C Dice* MAX204EPE -40ºC to +85°C 16 Plastic Dip MAX204EWE -40ºC to +85°C 16 Wide SO MAX205CPG 0°C to +70°C 24 Wide Plastic Dip MAX205EPG -40°C to +85°C 24 Wide Plastic Dip MAX206CNG 0°C to +70°C 24 Narrow Plastic Dip MAX206CWG 0°C to +70°C 24 Wide SO MAX206CAG 0°C to +70°C 24 SSOP MAX206ENG -40°C to +85°C 24 Narrow Plastic Dip
MAX200–MAX211/MAX213
+5V, RS-232 Transceivers with 0.1µF External Capacitors
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
20 ____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
© 2003 Maxim Integrated Products Printed USA is a registered trademark of Maxim Integrated Products.
Package Information
(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information, go to www.maxim-ic.com/packages
.)
SSOP.EPS
PACKAGE OUTLINE, SSOP, 5.3 MM
1
1
21-0056
C
REV.DOCUMENT CONTROL NO.APPROVAL
PROPRIETARY INFORMATION
TITLE:
NOTES:
1. D&E DO NOT INCLUDE MOLD FLASH.
2. MOLD FLASH OR PROTRUSIONS NOT TO EXCEED .15 MM (.006").
3. CONTROLLING DIMENSION: MILLIMETERS.
4. MEETS JEDEC MO150.
5. LEADS TO BE COPLANAR WITHIN 0.10 MM.
7.90
H
L
0
0.301
0.025
8
0.311
0.037
0
7.65
0.63
8
0.95
MAX
5.38
MILLIMETERS
B
C
D
E
e
A1
DIM
A
SEE VARIATIONS
0.0256 BSC
0.010
0.004
0.205
0.002
0.015
0.008
0.212
0.008
INCHES
MIN
MAX
0.078
0.65 BSC
0.25
0.09
5.20
0.05
0.38
0.20
0.21
MIN
1.73 1.99
MILLIMETERS
6.07
6.07
10.07
8.07
7.07
INCHES
D D
D
D
D
0.239
0.239
0.397
0.317
0.278
MIN
0.249
0.249
0.407
0.328
0.289
MAX
MIN
6.33
6.33
10.33
8.33
7.33
14L 16L
28L
24L
20L
MAX
N
A
D
e
A1
L
C
HE
N
12
B
0.068
Loading...