General Description
The MAX16054 is a pushbutton on/off controller with a
single switch debouncer and built-in latch. It accepts a
noisy input from a mechanical switch and produces a
clean latched digital output after a factory-fixed qualification delay.
The MAX16054 eliminates contact bounce during switch
opening and closing. The state of the output changes
only when triggered by the falling edge of the
debounced switch input; the output remains unchanged
on the rising edge of the input. Robust switch inputs
handle ±25V levels and are ±15kV ESD protected for
use in harsh industrial environments. The MAX16054
features a complementary output, OUT, which is the
inverted state of OUT. An asynchronous CLEAR input
allows an external signal to force the output flip-flop low.
Undervoltage-lockout circuitry ensures that OUT is in the
off state upon power-up. The MAX16054 requires no
external components, and its low supply current makes
it ideal for use in portable equipment.
The MAX16054 operates from a +2.7V to +5.5V single
supply. The MAX16054 is offered in a 6-pin thin SOT23
package and operates over the -40°C to +125°C automotive temperature range.
Applications
PDAs
MP3/Video Players
Portable Electronics
Set-Top Boxes
Portable Instrumentation
White Goods
Features
o Robust Inputs Can Handle Power Supplies Up to
±25V
o ±15kV ESD Protection
o Latched Output
o Low 7µA Supply Current
o Operates from 2.7V to 5.5V
o -40°C to +125°C Temperature Range
o Thin SOT23 Package
MAX16054
On/Off Controller with Debounce and
±15kV ESD Protection
________________________________________________________________
Maxim Integrated Products
1
GND
OUTCLEAR
1
+
6V
CC
5 OUT
IN
MAX16054
THIN SOT23
TOP VIEW
2
34
Pin Configuration
Ordering Information
MAX16054
OUT
3V
LDO
μP
EN
OUT
IN
CLEAR
GND
ON/OFF WITH LDO
V
CC
Typical Operating Circuits
19-4128; Rev 0; 5/08
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.
+
Denotes a lead-free package.
T = Tape and reel package. Devices are offered in 2.5k unit
increments.
-40°C to +125°C 6 Thin SOT23
Typical Operating Circuits continued at end of data sheet.
MAX16054
On/Off Controller with Debounce and
±15kV ESD Protection
2 _______________________________________________________________________________________
ABSOLUTE MAXIMUM RATINGS
ELECTRICAL CHARACTERISTICS
(VCC= +2.7V to +5.5V, TA= TJ= -40°C to +125°C, unless otherwise noted. Typical values are at VCC= +5V, TA= +25°C.) (Note 2)
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
Note 1: As per JEDEC 51 standard, multilayer board (PCB).
Note 2: All devices are 100% production tested at T
A
= +25°C. Specifications over temperature limits are guaranteed by design.
Note 3: OUT is guaranteed to be low for 1.0V ≤ V
CC
≤ V
UVLO
.
V
CC
to GND..............................................................-0.3V to +6V
IN to GND ................................................................-30V to +30V
CLEAR to GND .........................................................-0.3V to +6V
OUT, OUT to GND......................................-0.3V to (V
CC
+ 0.3V)
Short-Circuit Duration
OUT, OUT to GND ...................................................Continuous
Continuous Power Dissipation (T
A
= +70°C)
6-Pin Thin SOT23
(derate 9.1mW/°C at +70°C) (Note 1) ............................727mW
Operating Temperature Range .........................-40°C to +125°C
Maximum Junction Temperature .....................................+150°C
Storage Temperature Range .............................-60°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
Operating Voltage Range V
CC
(Note 3) 2.7 5.5 V
Supply Current I
CC
VCC = 5V, I
OUT
= I
OUT
= 0,
IN not connected
720µA
TA = +25°C 20 50 80
Debounce Duration t
DP
TA = -40°C to +125°C 5 50 99
ms
V
IL
0.65
VCC = 5V 2.5IN Threshold
V
IH
VCC = 2.7V 2.0
V
IN Hysteresis 420 mV
IN Pullup Resistance 32 63 100 kΩ
VIN = +25V +1.5
IN Current I
IN
VIN = -25V -1.5
mA
IN Voltage Range V
IN
-25 +25 V
Undervoltage-Lockout Threshold V
UVLO
VCC falling 1.8 2.4 V
V
OL
I
SINK
= 1.6mA 0.4
OUT/OUT Output Voltage
V
OH
I
SOURCE
= 0.4mA VCC - 1.0
V
V
CLEAR_IL
0.7
VCC = 5V 2.4CLEAR Threshold
V
CLEAR_IH
VCC = 2.7V 2.0
V
CLEAR Input Current I
CLEAR
-1 +1 µA
CLEAR High to OUT Low
Propagation Delay
t
CO
RL = 10kΩ, CL = 100pF 200 ns
ESD CHARACTERISTICS
IEC 61000-4-2 Air
Discharge
±15
IEC 61000-4-2 Contact
Discharge
±8
ESD Protection IN
Human Body Model ±15
kV
MAX16054
On/Off Controller with Debounce and
±15kV ESD Protection
_______________________________________________________________________________________
3
SUPPLY CURRENT
vs. TEMPERATURE
MAX16054 toc01
TEMPERATURE (°C)
SUPPLY CURRENT (μA)
1109565 80-10 5 20 35 50-25
1
2
3
4
5
6
7
8
9
10
0
-40 125
VCC = 5V
VCC = 3V
DEBOUNCE OF CLOSING SWITCH
MAX16054 toc02
10ms/div
10V
IN
10V/div
-10V
OUT
5V/div
0V
OUT
5V/div
0V
VCC = 5V
OUTPUT LOGIC LEVEL
vs. SUPPLY VOLTAGE
MAX16054 toc03
SUPPLY VOLTAGE (V)
OUTPUT LOGIC LEVEL (V)
5.04.54.03.53.02.5
1
2
3
4
5
6
0
2.0 5.5
VOH, I
SOURCE
= 0.4mA
VOL, I
SINK
= 1.6mA
Typical Operating Characteristics
(TA = +25°C, unless otherwise noted.)
DEBOUNCE DELAY PERIOD
vs. TEMPERATURE
MAX16054 toc04
TEMPERATURE (°C)
DEBOUNCE DELAY PERIOD (ms)
1109565 80-10 5 20 35 50-25
42
44
46
48
50
52
54
56
58
60
40
-40 125
VCC = 5V
VCC = 3V
VCC UNDERVOLTAGE LOCKOUT
vs. TEMPERATURE
MAX16054 toc05
TEMPERATURE (°C)
V
CC
UNDERVOLTAGE LOCKOUT (V)
1109580655035205-10-25
0.5
1.0
1.5
2.0
2.5
3.0
3.5
0
-40 125
VCC RISING
PIN NAME FUNCTION
1IN
Switch Toggle Input. IN features a -25V to +25V maximum input range and includes an internal 63kΩ
pullup resistor to V
CC
. Connect a pushbutton from IN to GND.
2 GND Ground
3 CLEAR Clear Input. Pull CLEAR high to force OUT low. Connect CLEAR to GND if unused.
4 OUT Active-Low CMOS Output
5 OUT Active-High CMOS Output
6 V
CC
+2.7V to +5.5V Supply Input. In noisy environments, bypass VCC to GND with a 0.1µF or greater
ceramic capacitor.