General Description
The MAX11508/MAX11509 integrated 3-channel video
filters for high-definition (HD), progressive-scan (PS),
standard-definition (SD), and bypass (BP) video
include an output buffer with +6dB gain and are ideal
for digital video disc (DVD) players, set-top box (STB)
receivers, high-definition television (HDTV), digital
video recorders (DVRs), and similar devices.
The MAX11508/MAX11509 video inputs feature a transparent clamp compatible with AC- and DC-coupled
input signals and allow DAC outputs to be directly coupled, eliminating the need for bulky coupling capacitors. The filter bandwidths are selectable to HD, PS,
and SD. A BP mode is provided for 1080p and highbandwidth RGB signals. Selectable input bias circuitry
on 2 filter channels offers simple connection to bipolar
video signals such as C, Pb, and Pr.
The MAX11508 filters provide -3dB bandwidths of 9MHz
(SD), 16MHz (PS), 33MHz (HD), and 60MHz (BP). The
MAX11509 filters provide -3dB bandwidths of 10MHz
(SD), 17MHz (PS), 34MHz (HD), and 60MHz (BP).
Each channel includes an output buffer with +6dB gain
that provides a full 2V
P-P
video signal into a 150Ω video
load. The buffers drive either AC- or DC-coupled loads
and assure a blanking level of below 1V after the backmatch resistor. The shutdown mode provided reduces
device current to 1µA (typ).
The MAX11508 offers a flat passband and the
MAX11509 features +0.8dB peaking to compensate for
DAC rolloff. The MAX11508/MAX11509 operate from a
5V power supply and operate over the upper commercial (0°C to +85°C) temperature range. The parts are
offered in the 14-pin TSSOP package.
Applications
Cable and Satellite STB Receivers
HDTV
DVD Players
Personal Video Recorders
DVRs
Video-On-Demand
HD Recorders
Features
♦ Three Selectable 6th-Order 9MHz/16MHz/33MHz
(SD/PS/HD) Filters
♦ Bypass Mode for High Bandwidth Signals
♦ Transparent Input Clamp
♦ Output Buffers Drive a Standard 150Ω Video Load
♦ ±12kV HBM ESD Protection on Outputs
♦ AC- or DC-Coupled Inputs
♦ AC- or DC-Coupled Outputs
♦ +0.8dB Peaking Passband Response (MAX11509)
in SD, PS, and HD Modes
♦ Single +5V Power Supply
♦ Lead-Free, 14-Pin TSSOP Package
MAX11508/MAX11509
Low-Cost, 3-Channel, HD/PS/SD/BP
Video Filters with Buffer
________________________________________________________________
Maxim Integrated Products
1
Pin Configuration
Ordering Information
19-4346; Rev 0; 10/08
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.
EVALUATION KIT
AVAILABLE
PART TEMP RANGE PIN-PACKAGE
Typical Operating Circuit appears at end of data sheet.
+
Denotes a lead-free/RoHS-compliant package.
MAX11508UUD+
MAX11509UUD+
TOP VIEW
FSEL0
Y/G_IN
Pr/R_IN
BIAS
+
1
V
CC
2
3
MAX11508
MAX11509
4
5
6
7
TSSOP
14
13
12
11
10
9
8
N.C.
FSEL1
Y/G_OUT
Pb/B_OUTPb/B_IN
Pr/R_OUT
SHDN
GNDN.C.
MAX11508/MAX11509
Low-Cost, 3-Channel, HD/PS/SD/BP
Video Filters with Buffer
2 _______________________________________________________________________________________
ABSOLUTE MAXIMUM RATINGS
ELECTRICAL CHARACTERISTICS
(VCC= +5V, R
LOAD
= 150Ω to GND, CIN= 0.1µF, TA= 0°C to +85°C, all frequency responses are relative to 100kHz, unless other-
wise noted.) (Note 1)
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
VCCto GND..............................................................-0.3V to +6V
All Other Pins to GND...................................-0.3V to the lower of
(V
CC
+ 0.3V) and +6V
Continuous Power Dissipation (T
A
= +70°C)
14-Pin TSSOP (derate 10mW/°C above +70°C) .......796.8mW
Maximum Current into Any Pin Except V
CC
and GND .....±50mA
Operating Temperature Range…. ..........................0°C to +85°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
Junction Temperature......................................................+150°C
DC CHARACTERISTICS
Supply Current I
Supply Voltage Range V
Input Voltage Range V
Power-Down Current I
Digital Input High Voltage V
Digital Input Low Voltage V
STANDARD-DEFINITION VIDEO
-1dB Bandwidth f
-3dB Bandwidth f
Stopband Attenuation A
Low-Frequency Gain A
Differential Gain dG All channels 0.7 %
Differential Phase dφ All channels 0.7 Degrees
Total Harmonic Distortion THD V
Signal-to-Noise Ratio SNR
Group Delay t
Power-Supply Rejection Ratio PSRR DC, all channels 50 dB
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
CC
PD
1dB
3dB
No load 24 35 mA
DD
Referenced to GND if DC-coupled 1.4 V
IN
BIAS = high 1
BIAS = low 15
IH
IL
MAX11508, TA = +25°C 4.5 7.9
MAX11509, TA = +25°C 5 8.6
MAX11508 9.0
MAX11509 10
f = 27MHz 35 48 dB
SB
No load 5.6 6.0 6.6 dB
V
= 1.4V
OUT
2V
P-P
f = 100kHz to 4.2MHz
f = 4.5MHz 59 ns
G
P-P
signal to RMS noise,
4.75 5.00 5.25 V
2.0 V
0.8 V
, f = 1MHz, all channels -60 dB
71 dB
µA
MHz
MHz
MAX11508/MAX11509
Low-Cost, 3-Channel, HD/PS/SD/BP
Video Filters with Buffer
_______________________________________________________________________________________ 3
Note 1: All devices are 100% production tested at TA= +25°C.
Note 2: Output AC-coupled with 220µF into 150Ω to GND.
ELECTRICAL CHARACTERISTICS (continued)
(VCC= +5V, R
LOAD
= 150Ω to GND, CIN= 0.1µF, TA= 0°C to +85°C, all frequency responses are relative to 100kHz, unless other-
wise noted.) (Note 1)
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
PROGRESSIVE-SCAN VIDEO
-1dB Bandwidth f
-3dB Bandwidth f
Stopband Attenuation A
Low-Frequency Gain A
Total Harmonic Distortion THD V
Signal-to-Noise Ratio SNR
Group Delay t
HIGH-DEFINITION VIDEO
-1dB Bandwidth f
-3dB Bandwidth f
Stopband Attenuation A
Low-Frequency Gain A
Total Harmonic Distortion THD
Signal-to-Noise Ratio SNR
Group Delay t
BYPASS VIDEO (Note 2)
-3dB Bandwidth f
Low-Frequency Gain A
Total Harmonic Distortion THD V
Signal-to-Noise Ratio SNR
1dB
3dB
1dB
3dB
3dB
MAX11508, TA = +25°C 9 13.5
MAX11509, TA = +25°C 10 14
MAX11508 16
MAX11509 17
f = 54MHz 44 dB
SB
V
= 1.4V
OUT
2V
signal to RMS noise,
P-P
f = 100kHz to 15MHz
f = 10MHz 47 ns
G
MAX11508, TA = +25°C 21 30
MAX11509, TA = +25°C 22 31
MAX11508 33
MAX11509 34
f = 37.125MHz 6.5
f = 44.25MHz 14.5
SB
f = 74.25MHz 45
V
V
= 1.4V
OUT
= 1.4V
V
OUT
= 1.4V
V
OUT
2V
signal to RMS noise,
P-P
f = 100kHz to 30MHz
f = 20MHz 25 ns
G
V
= 1.4V
OUT
signal to RMS noise,
2V
P-P
f = 100kHz to 30MHz
, f = 7MHz -55 dB
P-P
, f = 10MHz -55
P-P
, f = 15MHz -50
P-P
, f = 22MHz -40
P-P
, f = 22MHz -40 dB
P-P
MHz
MHz
5.6 6.0 6.6 dB
66 dB
MHz
MHz
dB
5.4 6.0 6.6 dB
dB
65 dB
60 MHz
5.4 6.0 6.6 dB
65 dB
MAX11508/MAX11509
Low-Cost, 3-Channel, HD/PS/SD/BP
Video Filters with Buffer
4 _______________________________________________________________________________________
Typical Operating Characteristics
(VCC= 5V, RL= 150Ω to GND, output DC-coupled, TA= +25°C, unless otherwise noted.)
MAX11508
SD FREQUENCY RESPONSE
10
0
-10
-20
-30
RESPONSE (dB)
-40
-50
-60
0.1 100
FREQUENCY (MHz)
101
MAX11508 toc01
7
5
3
1
RESPONSE (dB)
-1
-3
0.1 10
MAX11509
7
5
3
1
RESPONSE (dB)
-1
SD PASSBAND RESPONSE
MAX11508 toc04
10
0
-10
-20
-30
RESPONSE (dB)
-40
-50
MAX11508
SD PASSBAND RESPONSE
1
FREQUENCY (MHz)
MAX11508
PS FREQUENCY RESPONSE
MAX11508 toc02
MAX11508 toc05
MAX11509
SD FREQUENCY RESPONSE
10
0
-10
-20
-30
RESPONSE (dB)
-40
-50
-60
0.1 100
FREQUENCY (MHz)
101
MAX11508
PS PASSBAND RESPONSE
7
5
3
1
RESPONSE (dB)
-1
MAX11508 toc03
MAX11508 toc06
MAX11508 toc08
-3
0.1 10010
1
FREQUENCY (MHz)
MAX11508
HD FREQUENCY RESPONSE
10
0
-10
-20
-30
RESPONSE (dB)
-40
-50
-60
0.1 100
FREQUENCY (MHz)
-3
0.1 10
1
FREQUENCY (MHz)
MAX11509
PS FREQUENCY RESPONSE
10
0
-10
-20
-30
RESPONSE (dB)
-40
-50
-60
0.1 100
FREQUENCY (MHz)
101
MAX11508 toc07
-60
0.1 100
FREQUENCY (MHz)
101
MAX11509
PS PASSBAND RESPONSE
7
5
3
1
RESPONSE (dB)
-1
-3
0.1 100
110
FREQUENCY (MHz)
MAX11508 toc09
101