MAXIM DG308A, DG309 Technical data

19-3926; Rev 0; 3/91
Quad, SPST Analog Switches
_______________General Description
The DG308A/DG309 are quad, single-pole-single-throw (SPST) analog switches. The DG308A is normally open (SPST, NO), while the DG309 is normally closed (SPST, NC). Both parts feature fast switching speeds and low on­resistance over the analog range. Other features include a turn-on time under 120ns, a turn-off time under 90ns, and a channel on-resistance of 60. CMOS inputs provide reduced input loading and very low leakage currents.
Both parts feature a 44V maximum breakdown voltage rat­ing that allows 30V peak-to-peak switch-off blocking capacity. The DG308A/DG309 can be used with split sup­plies (±5V to ±20V) or a single positive supply (+5V to +30V), while retaining CMOS-logic-compatible inputs.
________________________Applications
Sample-and-Hold Circuits Test Equipment Communications Systems PBX, PABX Guidance and Control Systems Heads-Up Displays Military Radios
____________________________Features
60r
DS(ON)
Single/Bipolar-Supply OperationCMOS Logic CompatibleMonolithic, Low-Power CMOS Design
______________Ordering Information
PART
DG308ACJ
DG308ACY DG308ACK 0°C to +70°C DG308AC/D 0°C to +70°C Dice* DG308ADJ DG308ADY DG308ADK -40°C to +85°C DG308AAK -55°C to +125°C 16 CERDIP** DG309CJ DG309CY DG309CK 0°C to +70°C DG309C/D 0°C to +70°C Dice* DG309DJ DG309DY DG309DK -40°C to +85°C DG309AK -55°C to +125°C 16 CERDIP**
* Contact factory for dice specifications.
** Contact factory for availability and processing to MIL-STD-883.
TEMP. RANGE PIN-PACKAGE
0°C to +70°C 0°C to +70°C
-40°C to +85°C 16 Plastic DIP
-40°C to +85°C
0°C to +70°C 16 Plastic DIP 0°C to +70°C
-40°C to +85°C 16 Plastic DIP
-40°C to +85°C
16 Plastic DIP 16 Narrow SO 16 CERDIP
16 Narrow SO 16 CERDIP
16 Narrow SO 16 CERDIP
16 Narrow SO 16 CERDIP
DG308A/DG309
__________Typical Operating Circuit
VIN ±10V
* PINS 1, 8, 9, AND 16 ARE LOGIC-CONTROL INPUTS.
2
DG308A
3
-15V +15V
10k 20k
DG309
4 5 6 7 8
**
PROGRAMMABLE-GAIN AMPLIFIER
________________________________________________________________
1
**
5k
16 15 14 13 12 11 10
9
40k
5k
V
OUT
______Pin Configuration/Truth Table
TOP VIEW
IN1
1 2
D1 S1
3 4
V-
5
GND
6
S4 D4
7
IN4
8
TRUTH TABLE
LOGIC DG308A
0 1
DG308A
DG309
DIP/SO
OFF
ON
Maxim Integrated Products
IN2
16
D2
15
S2
14 13
V+ (SUBSTRATE) N.C.
12 11
S3
10
D3
9
IN3
DG309
ON
OFF
1
For free samples & the latest literature: http://www.maxim-ic.com, or phone 1-800-998-8800
Quad, SPST Analog Switches
ABSOLUTE MAXIMUM RATINGS
Voltage Referenced to V-
V+ ....................................................................................+44V
GND.................................................................................+25V
Digital Inputs V
Current into Any Terminal (except S or D)..........................30mA
Continuous Current (S or D)................................................20mA
Peak Current (S or D)
(pulsed at 1ms, 10% duty cycle max) ............................70mA
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
, VD................(V- - 2V) to (V+ + 2V) or 20mA,
S
whichever occurs first
Continuous Power Dissipation (TA= +70°C) (Note 1)
Plastic DIP (derate 10.53mW/°C above +70°C)............842mW
Narrow SO (derate 8.70mW/°C above +70°C) .............696mW
CERDIP (derate 10.00mW/°C above +70°C)................800mW
Operating Temperature Ranges
DG308AC_/DG309C_.........................................0°C to +70°C
DG308AD_/DG309D_......................................-40°C to +85°C
DG308AAK/DG309AK...................................-55°C to +125°C
Storage Temperature Range.............................-65°C to +150°C
Lead Temperature (soldering, 10sec).............................+300°C
DG308A/DG309
ELECTRICAL CHARACTERISTICS
(V+ = 15V, V- = -15V, TA= T
SWITCH
Analog Signal Range
Drain-Source On-Resistance
Source-Off Leakage Current
Drain-Off Leakage Current
Drain-On Leakage Current
INPUT
Input Current with Input Voltage High
Input Current with Input Voltage Low
SYMBOLPARAMETER
ANALOG
r
DS(ON)
I
S(OFF)
I
D(OFF)
I
D(ON)
INH
INL
to T
MIN
, unless otherwise noted.) (Note 2)
MAX
VIN= 11V (DG308A), VIN= 3.5V (DG309), IS= 1mA, VD= 10V or -10V
VIN= 3.5V (DG308A), VIN= 11V (DG309), VS= 14V, VD= -14V
VIN= 3.5V (DG308A), VIN= 11V (DG309), VS= -14V, VD= 14V
VIN= 3.5V (DG308A), VIN= 11V (DG309), VS= 14V, VD= -14V
VIN= 3.5V (DG308A), VIN= 11V (DG309), VS= -14V, VD= 14V
VIN=11V (DG308A), VIN= 3.5V (DG309), VS= VD= +14V
VIN= 11V (DG308A), VIN= 3.5V (DG309), VS= VD= -14V
VIN= 15V
VIN= 0V
CONDITIONS
TA= +25°C
= +25°C,
T
A
T
MIN
TA= T
MAX
TA= +25°C TA= T
MAX
TA= +25°C TA= T
MAX
TA= +25°C TA= T
MAX
TA= +25°C TA= T
MAX
TA= +25°C TA= T
MAX
TA= +25°C TA= T
MAX
TA= +25°C, T
MAX
TA= +25°C, T
MAX
DG30_AK
MIN TYP MAX
60 100
95 150
-1 0.1 1
-100 100
-1 -0.1 1
-100 100
-1 0.1 1
-100 100
-1 0.1 1
-100 100
-2 0.1 2
-200 200
-2 0.1 2
-200 200
DG30_C/D
MIN TYP MAX
-15 15 60 100
80 125
-5 0.1 5
-100 100
-5 0.1 5
-100 100
-5 0.1 5
-100 100
-5 0.1 5
-100 100
-5 0.1 5
-200 200
-5 0.1 5
-200 200
-1 0.001 1
-1 0.001 1
UNITS
V-15 15V
nA
nA
nA
µA-1 0.001 1I
µA-1 -0.001 1I
2 _______________________________________________________________________________________
Loading...
+ 2 hidden pages