Maxim Lighting is a registered trademark and StarStrand is a trademark
of Maxim Lighting International, Inc. All products, images, designs and
logos are © 2010 Maxim Lighting International, Inc. All Rights Reserved.
For more information or customer service call
(800) 486-2946 or visit maximlighting.com
Installation Instructions
Model 53391
Features
Technical Parameter
Dimensions
(Unit: mm/inch)
53391
RGB LED Controller for DigiRibbon
40
3
.9
7
7.5
35.4
7
.
4
7
1.39”
”
21
.
3
1.57”
”
4
9
.2
0.30”
In pu t voltage: DC 12V
Output power : 100W
Remote contro l distance:
40m (without obstacles )
Output c ha nnel: one group digital signal
1. 7 - c olor flowing forward without grou nding
2. S ingl e LED dots running back-and-forth, with ou t grounding
3. S ingl e LED dots running back-and-forth, wit h groundin g
4. 7 - c olor flowing forward and back ward , without grounding
5. 7 - colo r flowing from the middle to the two end s, and then running in the opposite
direction, without grounding
6. 7 - c olor flowing forward with gro un di ng
7. 7 - c olor flowing backward with ground in g
Color Patterns
RGB LED Controller for DigiRibbon II
TM
nI
rewoP V21 CD
r
o
t
a
c
i
d
n
I
Signal out
100mm(3.94" )
64mm(2.52")
Controls up to 300’ of DRS tape
36 modes and patterns
20 levels of speed adjustment
16 levels of brightness
Power off data memory
Remote control included
Maxim Lighting is a registered trademark and StarStrand is a trademark
of Maxim Lighting International, Inc. All products, images, designs and
logos are © 2010 Maxim Lighting International, Inc. All Rights Reserved.
For more information or customer service call
(800) 486-2946 or visit maximlighting.com
Installation Instructions
Model 53391
8. 7 - color flowing back-and-forth, with grounding
9. 7 - color running from middle to the two ends, and then running in the opposite
direction, with grounding
10. 7 - color jump
11. Constant red
12. Constant green
13. Constant blue
14. Constant yellow
15. Constant purple
16. Constant cyan
17. Constant white
18. Six colors in one LED dots running
19. Six colors in two LED dots running
20. RGB cross-fading
21. Two red dots chasing back-and-forth with fading
22. Two green dots chasing back-and-forth with fading
23. Two blue dots chasing back-and-forth with fading
24. Two yellow do
ts chasing back-and-forth with fading
25. Two purple dots chasing back-and-forth with fading
26. Two cyan dots chasing back-and-forth with fading
27. Two white dots chasing back-and-forth with fading
28. Red color flowing backward with fading
29. Green color flowing backward with fading
30. Blue color flowing backward with fading
31. Yellow color flowing backward with fading
32. Purple color flowing backward with fading
33. Cyan color flowing backward with fading
34. White color flowing backward with fading
35. Six colors six dots chasing back-and-forth with fading
36. Al l patterns alternating
POWE R Powe r on /off
PAUSE Pause t he current pattern (you can catch up wit h th
e mi nute c hanging)
MO DE + ne xt pattern
MO DE - previou s pattern
SPEED+ increas e spee d
SPEED- decreas e spee d
BRT+:i ncrease the brightness (19 levels)
BRT-:decreas e the brightness (19 levels)
：
：
：
：
：
：
Function Description
Th is con troller has 36 modes that can be used wit h an y length of ribbon.
To s et t he ribbon length:
1.P ress the power key to turn off the stri p
2.P ress the MODE+ or MODE- key, the stri p will t urn red, this indicates that
adjustm en t mode is active.
Maxim Lighting is a registered trademark and StarStrand is a trademark
of Maxim Lighting International, Inc. All products, images, designs and
logos are © 2010 Maxim Lighting International, Inc. All Rights Reserved.
For more information or customer service call
(800) 486-2946 or visit maximlighting.com
Installation Instructions
Model 53391
3.Press the MODE + to increase the length 1 time for every 3’or MODE - to reduce the length
1 time for every 3’(the red light
indicates the active length).
4.After you have adjusted to the correct length, press the power button again. The controller
is now set to the new length, this data is stored, even when the power is switched off or
disconnected.
1. T hi s device can be only used to co nt rol Digital Rainbow star LED strips, i t is not
co mpat ible
wi th s tandard RGB Strips. Don 't c onnect it to ordinary strip s as t hi s may
da ma ge the controlle
r.
2. T hi s device has a single wire fo r si gnal output, make sure the wire s are connected
correc tly to avoid damage t o th e controller and / or the str ip .
3.U se o nly 12V DC power supply, do N OT u se high voltage AC.
4.T he m aximum input power should b e below 100W to avoid damag e to t he controller
an d / or the strip.
Cautions
Loading...