User’s Manual
MXH-BT600E
BLUETOOTH WIRELESS HEADPHONE
PRODUCT FEATURES
Thank you for purchasing this Maxell Bluetooth Headphone! The MXH-BT600E is a Bluetooth
headphone with the following features:
Wireless playback of music from your Bluetooth enabled mobile phone via the Bluetooth connection
Up to 33 feet (10 meters) line-of-sight operating distance
WHAT’S INSIDE?
Bluetooth headphone
USB to Micro-USB charging cable
3.5mm to 3.5mm audio cable
User’s manual
LOCATION OF CONTROLS
1
Built-in Microphone
7
LED indicator
2
Multifunctional button
8
Charging jack
3
Next song
9
Volume down
4
Pause/play
10
Volume up
5
Last song
11
Right headphone
6
Line-in jack
12
Left headphone
PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS UNIT
AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE.
GET STARTED
Turing the MXH-BT600E ON/OFF
1. In standby mode, press and hold the Multifunctional button for 3-5 seconds until a beep sound is
heard to turn the unit ON, the Indicator LED will flash blue 3 times.
2. To turn the unit OFF, press and hold the Multifunctional button for 3 seconds until a beep sound is
heard. Don’t forget to turn off the Bluetooth feature on your phone or multimedia player.
Pairing the MXH-BT600E
Prior to using the headset for the first time, you have to pair it with a Bluetooth-enabled cell phone.
The pairing procedures are subject to different models of cell phones. Please refer to your cell phone
user’s manual for further information. The general pairing procedures are as follows:
1. Keep your headset and phone within 1 meter when pairing;
2. Press and hold the MULTIFUNCTIONAL button for about 8 seconds to enter the MXH-BT600E
into pairing mode when it is off. The LED will flash red and blue alternatively. Your Bluetooth
enabled device can now scan and connect to “MAXELL MXH-BT600E”
3. After successfully connecting, blue LED flashes 2-3 times every 4 seconds.
OR
4. Plug 3.5mm audio cable from your device to the headphone.
5. Music playing through cable is available with MXH-BT600E.
Remarks:
If pairing fails, please turn off the headset first and then re-pair according to steps 1-3 mentioned
above.
After pairing is successful, the headset and the mobile phone will remember each other, they will not
need to re-pair next time.
Every time the headset is turned on, it will connect to the last connected device automatically. If you
want to pair it with other devices, please turn off the Bluetooth function of last connected device first
and pair the headset with the new device according to steps 1-3 mentioned above.
Loading...