Maxell MC-X8801W, MC-WX8651W, MC-WU8601W Product Sheet

Specications Dimensions

Model name

Display system

Size of eective display area

Display

Number of pixels

device

Lens

Zoom Focus Lens shift

Light source Screen size Light output (Brightness)* Contrast ratio (full white / full black)*2 Speaker Displayable scanning frequency Display Resolution

Terminals

Network

Operating temperature Operating humidity Power requirements

Power consumption

Standby mode power consumption Standard outside dimensions (W × H × D)(Excluding lens) Weight Accessories

Optional parts

*1: When PICTURE MODE is set to STANDARD, ACTIVE IRIS is set to OFF, and ZOOM position is WIDE (max). *2: When PICTURE MODE is set to STANDARD, ACTIVE IRIS is set to ON, and ZOOM position is WIDE (max). *3: WUXGA (60 Hz) Reduced Blanking only. *4: Optional wireless adapter is needed. *5: When the ambient temperature exceeds 40 °C(104 ° F), the brightness of the lamp is reduced automatically. *6: SAVING mode disables the functions of MONITOR OUT, AUDIO OUT, speaker sound, network communication, RS-232C control except POWER ON command, etc. in standby. *7: The availability of the USB wireless adapter varies depending on the country

and the region. *8: HAS-404U is used with a projector that the ultra short throw xed lens FL-710 is attached to when it is installed at the ceiling mounting position.

Horizontal Vertical

Computer

Video

HDMI IN COMPUTER IN MONITOR OUT VIDEO IN SDI IN HDBaseT Display Port AUDIO IN AUDIO OUT CONTROL IN (RS-232C) LAN WIRELESS REMOTE CONTROL IN REMOTE CONTROL OUT Wired Wireless (Option*

USB wireless adapter Lamp

Air lter

Option lens

Mounting accessory

MC-WU8701W MC-WX8751W

MC-WU8701B

3LCD

0.76" × 3 aspect ratio 16:10

2,304,000 pixels 1,024,000 pixels 786,432 pixels

(1920 horizontal × 1200 vertical) (1280 horizontal × 800 vertical)

Optional (No lens include in the projector)

Motorized (except for the option lens FL-710 / FL-701)

Motorized

Motorized (V,H) (except for the option lens FL-710 / FL-701)

430 W lamp 370 W lamp 430 W lamp 370 W lamp 430 W lamp

30 ~ 600 inch (100 ~ 350 inch for the ultra short throw xed lens FL-701, 60~600 inch for the ultra short throw lens USL-701)

7,000 lm 6,000 lm 7,500 lm 6,500 lm 8,000 lm

10,000 : 1 (Presentation mode)

8 W × 2 (mono)

31.5 ~ 106 kHz

56 ~ 120 Hz

WUXGA*

*Native resolution is WUXGA. *Native resolution is WXGA. *Native resolution is XGA.

1080P (max.) 1080P (max.) 1080P (max.)

*Native resolution is WUXGA. *Native resolution is WXGA. *Native resolution is XGA.

HDMI connector × 2 (HDCP compliant)

Mini D-sub 15-pin connector × 1

RCA connector × 1

BNC connector x1 -

RJ-45 connector × 1

DisplayPort × 1

3.5mm (stereo) mini connector × 2, RCA connector (L,R) × 1

3.5mm (stereo) mini connector × 1

D-sub 9-pin connector × 1

RJ-45 connector × 1

USB type A × 1 (Used for wireless network)

3.5mm (stereo) mini connector × 1

100BASE-TX / 10BASE-T

IEEE 802.11b/g/n

)

0 ~ 45 °C*

10 - 90 % (non-condensing)

C 100 V - 120 V , 5.9 A AC 100 V-120 V , 5.2 A AC 100 V - 120 V , 5.9 A AC 100 V - 120 V , 5.2 A AC 100 V - 120 V , 5.9 A

AC 220 V - 240 V , 2.9 A AC 220 V - 240 V , 2.5 A AC 220 V - 240 V , 2.9 A AC 220 V - 240 V , 2.5 A AC 220 V - 240 V , 2.9 A

AC 100 V - 120 V : 580 W AC 100 V - 120 V : 510 W AC 100 V - 120 V : 580 W AC 100 V - 120 V : 510 W AC 100 V - 120 V : 580 W

AC 220 V - 240 V : 560 W AC 220 V - 240 V : 500 W AC 220 V - 240 V : 560 W AC 220 V - 240 V : 500 W AC 220 V - 240 V : 560 W

Less than 0.35 W at saving mode*

501 mm × 167 mm × 437 mm (19.7" × 6.6" × 17.2") (Including protruding parts),

Approx. 11.1 kg (24.5 lbs.) (Excluding lens)

Remote control with batteries, Power cord, Computer cable, User’s manual, Security label,

Adapter cover, Terminal cover, HDMI cable holder, Cable tie

USB-WL-11N*

DT01881 DT01871 DT01881 DT01871 DT01881

UX40821

FL-710 (Ultra short throw xed lens), USL-701 (Ultra short throw lens), FL-701 (Fixed short throw lens), SL-712 (Short throw lens)

ML-713 (Middle throw lens), LL-704 (Long throw lens), UL-705 (Ultra short throw lens)

HAS-9110 (Bracket for xing mount), HAS-104S (Slim adapter for xing mount), HAS-204L (Standard adapter for xing mount),

HAS-304H (Long adapter for xing mount), HAS-404U (Ceiling mount with 6-axis adjustment)*

MC-WU8601W

MC-WX8751B

(max.) Full HD (max.) Full HD (max.)

(The brightness of light source may be reduced automatically over 40 °C.)

498 mm × 156 mm × 426 mm (19.6” × 6.1” × 16.8”)(Excluding protruding parts)

MC-WX8651W

(1024 horizontal × 768 vertical)

MC-X8801W

0.79" × 3 aspect ratio 4: 3

(6.6” )

167mm

501mm (19.7” ) 437mm (17.2” )

Terminals

(1) (2) (3) (4) (5) (6) (7)

(8) (9)

(11)(10)

(1) HDBaseT (2) DisplayPort (3) HDMI IN 1 (4) HDMI IN 2 (5) SDI (MC-WU8701W

/ MC-WU8701B only) (6) WIRELESS (7) LAN (8) COMPUTER IN (9) AUDIO IN 1

(10) REMOTE CONTROL IN (11) REMOTE CONTROL OUT (12) CONTROL (13)

VIDEO (14) AUDIO IN 2 (15) MONITOR OUT (16) AUDIO OUT

(14) (15)(13)(12)

(16)

Projection Distance

H × V : Screen size

a : Projection distance (from the projector's front panel to screen) (±10%)

H × V : Screen size

a1: Reflecting mirror surface to screen a2: Projector end to screen b1: Projector top to screen edge (closer edge to projector) b2: Projector bottom to screen edge (closer edge to projector)

*The gures are not drawn to scale.

LCD Projector

Projection Distance

MC-WU8701W / MC-WU8701B / MC-WU8601W

16 : 10 screen (1,920 × 1,200)(±10%)

MC-WX8751W / MC-WX8751B / MC-WX8651W

16 : 10 screen (1,280 × 800)(±10%)

MC-X8801W

4 : 3 screen (1,024 × 768)(±10%)

Screen size FL-710 USL-701 FL-701 SL-712 ML-713 LL-704 UL-705

Type H(m) V(m) a1 a2 b1 b2 ⓐ min. ⓐ max. Fixed ⓐ min. ⓐ max. ⓐ min. ⓐ max. ⓐ min. ⓐ max. ⓐ min. ⓐ max. (inch) m inch m inch m inch m inch m inch m inch m inch m inch m inch m inch m inch m inch m inch m inch m inch

100 2.2 1.3 0.819 32 0.108 4 0.427 17 0.616 24 1.7 67 2.2 87 1.8 69 2.5 100 3.8 151 3.7 146 6.3 248 6.1 240 10.3 407 10.3 407 17.6 691

150 3.2 2.0 1.185 47 0.473 19 0.662 26 0.851 34 2.5 100 3.3 129 2.6 103 3.8 150 5.7 225 5.5 219 9.4 371 9.1 359 15.5 612 15.4 605 26.2 1032

300 6.5 4.0 2.281 90 1.569 62 1.369 54 1.558 61 5.0 196 6.5 256 5.2 205 7.6 298 11.4 450 11.1 435 18.8 740 18.2 718 31.1 1225 30.5 1200 52.2 2056

100 2.2 1.3 0.819 32 0.108 4 0.427 17 0.616 24 1.7 67 2.2 87 1.8 71 2.6 102 3.9 154 3.8 149 6.4 252 6.2 244 10.5 415 10.5 415 17.9 705

150 3.2 2.0 1.185 47 0.473 19 0.662 26 0.851 34 2.5 100 3.3 129 2.7 105 3.9 153 5.8 230 5.7 223 9.6 378 9.3 366 15.8 624 15.7 617 26.7 1053

300 6.5 4.0 2.281 90 1.569 62 1.369 54 1.558 61 5.0 196 6.5 256 5.3 209 7.7 304 11.7 459 11.3 444 19.2 755 18.6 732 31.7 1250 31.1 1223 53.3 2097

100 2.0 1.5 0.797 31 0.086 3 0.326 13 0.515 20 1.7 65 2.1 84 1.7 67 2.5 97 3.7 146 3.6 142 6.1 240 5.9 232 10.0 395 10.0 395 17.0 671

150 3.0 2.3 1.152 45 0.440 17 0.510 20 0.699 28 2.4 96 3.2 125 2.5 100 3.7 145 5.6 219 5.4 212 9.1 360 8.8 348 15.1 593 14.9 587 25.4 1002

300 6.1 4.6 2.215 87 1.504 59 1.064 42 1.253 49 4.8 190 6.3 247 5.0 198 7.3 289 11.1 436 10.7 422 18.2 718 17.7 696 30.2 1189 29.6 1164 50.7 1995

Environment

Compliance with EU Directive RoHS* Reduction of resin usage in production

Design and specifications are subject to change without notice.

· The projected images and comparison photos in this catalog are simulations. · LCD panels, polarizers and other optical components and cooling fans may need replacement after prolonged usage. For more details, please consult a sales representative. have limited service lives. They must be repaired or replaced if they are used for a long period of time. burn out if struck or after it has been used for a period of time. The time until it bursts or burns out varies greatly according to differences between lamps and usage conditions. Turning the lamp’ s power on and off frequently shortens its service life. replacement cycle may be shortened. as these parts are extremely hot. Crestron Connected Logo are registered trademarks of Crestron Electronics. States and other countries. Alliance logo are trademarks of the HDBaseT Alliance.

Do not use in places where there is a lot of water, dampness, steam, dust, soot or tobacco smoke. This may result in fire or malfunction. · Optical components (lamp, LCD panel, polarizing plate, PBS [polarizer beam splitter])

Optical components other than the lamp: If the projector is used for six hours or more per day, they may need to be replaced in less than a year. · LCD panel: If the projector is used continuously for six hours or more, its

Do not turn projector on again for ten minutes after shutdown. Neglect can shorten the lifetime or the lamp. During use and immediately after use, do not touch anywhere near the lamp and the vents

Each product may have differences of color, brightness and focus due to manufacture variation. · Blu-ray DiscTM and Blu-rayTM are trademarks of Blu-ray Disc Association. · Crestron Connected and the

DICOM is the registered trademark of the National Electrical Manufacturers Association for its standards publications relating to digital communications of medical information. · HDBaseTTM and the HDBaseT

Use of hot runners in molds for making upper housing in order to reduce mill ends.

These projectors use a mercury lamp with high internal pressure. Because of its properties, this lamp may burst with a loud noise or

HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United

Extron® is registered trademark of RGB Systems, Incorporated. · All other trademarks are the properties of their respective owners.

Maxell, Ltd. 5030 Totsuka-cho, Totsuka-ku Yokohama, 244-0003, Japan http://proj.maxell.co.jp/en/

*1 RoHS is the acronym of "Directive 2011/65/EU of the European Parliament

and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment".

Seamless design and High image quality Providing advanced functions and

exible installation features

MC-WU8701W / MC-WU8701B / MC-WU8601W MC-WX8751W / MC-WX8751B / MC-WX8651W

MC-X8801W

March 2019

MHP-E012 032019

*Projected images are simulations

LINE UP

ACCENTUALIZER and HDCR IMAGE OPTIMIZER COLOR MANAGEMENT

ACCENTUALIZER makes pictures look more real by enhancing shade, sharpness, and gloss, to make pictures clearer. The HDCR function corrects blurred images caused by room lighting or outside light sources and creates an effect similar to increasing contrast resulting in clear images even in bright rooms.

* Comparison photos are simulations.

HDCR HDCR

Bright room

OFF ON

High Image Quality and Visibility

Equipped with IMAGE OPTIMIZER that maintains visibility of an image through automatic image correction in accordance with lamp condition.

* This function may not work properly when HDCR

and/or ACCENTUALIZER is ON.

* Comparison photos are simulations.

IMAGE OPTIMIZER

After long-hour use

OFF ON

IMAGE OPTIMIZER

This feature allows you to change the HUE, SATURATION, and LUMINANCE for each of 6 colors (red, green, blue, cyan, magenta, and yellow) without influencing each other. With this technology, for example, you can change only bluish colors, such as the sky, while maintaining the other colors by adjusting the HUE of the blue.

* Comparison photos are simulations.

Original image

Previous technology

This technology

MC-WU8701W

MC-WU8701B

MC-WU8601W

Option lens

FL-710

Ultra short throw fixed lens Zoom: ×1.0

USL-701

Ultra short zoom lens Zoom: ×1.3

Ultra Short Throw fixed lens

All Glass lens

FL-710 uses all glass lenses that reduce the blurring that occurs under changes between high and low temperature.

Ceiling mount HAS-404U

Ceiling mount bracket with 6-axis adjustment mechanism. Adopting the Jack system, it is easy to adjust elevation.

MC-WX8751W

MC-WX8751B

1.29m

SL-712

Short throw lens Zoom: ×1.5

FL-710 on the MC-WU8701B

160 inch

Screen

FL-701

Fixed short throw lens Zoom: x1.0

USL-701 on the MC-WU8701B

3.13m

Projection distance shortened by Approx.

of USL-701

* Secure a clearance of 50 cm or greater between the exhaust vents and a screen or walls. * This figure is not drawn to scale.

MC-WX8651W

ML-713

Middle throw lens Zoom: ×1.7

With the terminal cover, you can install the projector seamlessly.

* You may not be able to attach the terminal cover when

cables and devices are connected to the connectors other than the HDBaseT

* The lens of the projector is sold separately.

* Local availability may be limited.

MC-X8801W

XGA 8,000 lmWXGA 7,500 lmWUXGA 7,000 lm WXGA 6,500 lmWUXGA 6,000 lm

LL-704

Long throw lens Zoom: ×1.7

UL-705

Ultra long throw lens Zoom: ×1.7

Seamless Design

terminal.

Terminal cover

Advanced Installability and System Features for Various Uses

Warping

This function is possible from your computer by using the specialized application. Projection is possible on spherical surfaces and surfaces with corners, as well as conventional flat screens.

Spherical

object

* The specialized application for geometry correction is required.

Corner wall

The projectors are equipped with the Edge Blending function that achieves further seamless projection of one image using multiple projectors, and allow to project on a huge curved screen by using the geometry correction simultaneously.

* Additional equipment

may be required for this feature.

* This figure is not

drawn to scale.

Curved screen Curved screen

Edge Blending

The entire image

becomes dark.

Dark parts of the image

becomes clear.

Various Installation

Projectors can be installed facing vertical 360 degrees directions*

. In

360° projection*

addition, by rotating the installation position of the projector 90 degrees*

, you can project images that are vertically long. These features make it possible to provide various displays and image representations.

*1 When the ultra long throw lens UL-705 is attached, the projector cannot be

installed facing its projection lens upward or downward.

*2 Limited to the position where the lamp door side faces upward. When the

projector is used in a portrait installation, the service life of a lamp becomes shorter.

Motorized Lens Shift

The motorized lens shift lets you choose more convenient installation locations, even for large spaces.

* The figure below shows the lens shift range for

MC-WU8701W / MC-WU8701B / MC-WU8601W / MC-WX8751W / MC-WX8751B / MC-WX8651W with the optional middle throw lens ML-713 at the ceiling mounting position.

screen

Right

0.1

screen

1.55

screen

Left

0.1

screen

Down 0.55

1.2 screen

* This figure is not drawn to scale.

360°

Portrait projection*

90°90°

Digital Connectivity

Equipped with 2 HDMI® input terminals for the current widely-used interface. In addition, these models have more rich digital connectivity, DisplayPort, HDBaseT

, and SDI

input

terminals.

*3 SDI terminal is located on the MC-WU8701W/B only.

Blu-rayTM player

HDBaseT

Up to100 m

HDBaseT

transmitter

Broadcast

camera

Up to100 m

SDI

High Reliability and Stability

Hybrid Filter

The projectors use a three-layer filter with two layers of unwoven cloth and a static electrode filter. The filter can last up to 20,000 hours* reducing maintenance time.

*4 This is an estimate of the acceleration test performed under the condition of 50mg/m³

suspension dust concentration using JIS (Japanese Industrial Standards) standard powder. Cleaning intervals vary depending on the use environment.

The status monitor is a sub-LCD located on the rear panel of the projector. It displays the present condition of the projector, including errors, setup information, and error history.

Maxell 3LCD projectors incorporate three LCD panels with inorganic alignment layers that are light resistant, increasing brightness and contrast ratio. They provide smooth images and high reliability.

without cleaning,

Status Monitor

Real time monitoring

Lamp time · Filter time

Projector usage time

IP Address

Error and alarm message

Cover error · Lamp error

Temperature error

Filter cleaning time

and more…

Inorganic LCD panels

(High Temperature Poly-Silicon)

HTPS

An error message turns on.

LCD(HTPS)

Prism

Easy Maintenance

The lamp door and the filter cover are located on both sides, facilitating maintenance and replacement when the projector is installed on the ceiling. The serial number and MAC address are also labeled on the side chassis for easy readability.

Monitoring Projector Status

The projectors allow you to get

Input Source

the information displayed on the status monitor and more by your tablet or smartphone with the latest dedicated free online application when you need, even if you are not close to the projector.

* Available information depends on the model of

projector. The optional USB wireless adapter USB-WL-11N supporting IEEE802.11b/g/n is required when you connect the projector to a wireless network.

Error Status

Temperature

Other Features

[Network]

Network presentation

[Security]

Power On/Off, Magnify, PbyP / PinP, DICOM Wired/Wireless(IR) remote control

*5 This projector is not a medical device and is not compliant with the DICOM

: Projector Control, Wireless capability (option), Easy Scheduling Setting,

: PIN lock, Key lock, Lens lock

neither the projector nor the DICOM

[Installability]

: Perfect Fit, Instant Stack, Lens center design

[Usability]

Simulation Mode should be used for medical diagnosis.

: Multi-language user menu, Direct

simulation mode*5, Remote ID,

Lamp Time

Filter Time

…

standard, and