Maxell MC-EX5001, MC-EU4501, MC-EW5001, MC-EU5001 User Manual
LCD Projector
MC-EU5001/MC-EU4501
MC-EW5001/MC-EX5001
User's Manual (concise)
Thank you for purchasing this projector.
This is the basic manual on the product. Visit our website to get the detailed
manuals and the latest information on the product. Check them before using the
product, for safe use and utilization of the product.
Our website: See the attached sheet.
WARNING ►Before using this product, be sure to read all manuals for this
product. After reading them, store them in a safe place for future reference.
►Heed all the warnings and cautions in the manuals or on the product.
►Follow all the instructions in the manuals or on the product.
NOTE • In this manual, unless any comments are accompanied, “the
manuals” means all the documents provided with this product, and “the product”
means this projector and all the accessories came with the projector.
ENGLISH
Contents
First of all ............................................ 2
Entries and graphical symbols explanation ......2
Important safety instruction ..............................2
Regulatory notices .............................. 3
About Electro-Magnetic Interference ................
Disposal of Old Equipment and Batteries
Only for European Union and countries with
recycling systems
Contents of package........................... 4
Preparing for the remote control ......... 5
Arrangement ....................................... 6
Connecting with your devices ............. 7
Fastening the adapter cover ............... 8
............................................... 4
Connecting power supply ................... 9
Fastening the cable ............................ 9
Turning on the power ........................ 10
Adjusting the projector's elevator ..... 11
3
Displaying the picture ....................... 12
Turning off the power ........................ 13
Replacing the lamp ........................... 14
Cleaning and replacing the air filter
Installing or replacing
the internal clock battery ............... 18
Specifications ................................... 19
Troubleshooting
- Warranty and after-service ........... 20
.. 16
1
First of all
Entries and graphical symbols explanation
The following entries and graphical symbols are used for the manuals and the
product as follows, for safety purpose. Please know their meanings beforehand,
and heed them.
WARNING
CAUTION This entry warns of a risk of personal injury or physical damage.
NOTICE This entry notices of fear of causing trouble.
Important safety instruction
The followings are important instructions for safely using the product. Be sure to
follow them always when handling the product. The manufacturer assumes no
responsibility for any damage caused by mishandling that is beyond normal usage
defined in these manuals of this projector.
WARNING ►Never use the product in or after an abnormality (ex. giving
off smoke, smelling strange, took a liquid or an object inside, broken, etc.) If an
abnormality should occur, unplug the projector urgently.
►Situate the product away from children and pets.
►Keep small parts away from children and pets. If swallowed, consult a
physician immediately for emergency treatment.
►Do not use the product when there is fear of a thunderbolt.
►Unplug the projector from the power outlet if the projector is not used for the
time being.
►Do not open or remove any portion of the product, unless the manuals direct
it. For internal maintenance, leave it to your dealer or their service personnel.
►Use only the accessories specified or recommended by the manufacturer.
►Do not modify the projector or accessories.
►Do not let any things or any liquids enter to the inside of the product.
►Do not wet the product.
►Do not place the projector where any oils, such as cooking or machine oil,
are used. Oil may harm the product, resulting in malfunction, or falling from the
mounted position. Do not use adhesive such as threadlocker, lubricant and so
on.
►Do not apply a shock or pressure to this product.
- Do not place the product on an unstable place such as the uneven surface or
the leaned table.
- Do not place the product unstably. Place the projector so that it does not
protrude from the surface where the projector is placed on.
- Remove all the attachments including the power cord and cables, from the
projector when carrying the projector.
►
Do not look into the lens and the openings on the projector, while the lamp is on,
since the projection ray may cause a trouble on your eyes.
►
Do not approach the lamp cover and the exhaust vents, while the projection lamp
is on. Also after the lamp goes out, do not approach them for a while, since too hot.
This entry warns of a risk of serious personal injury or even death.
2
Regulatory notices
About Electro-Magnetic Interference
This is a Class A product. In a domestic environment this product may cause
radio interference in which case the user may be required to take adequate
measures.
This product may cause interference if used in residential areas. Such use must
be avoided unless the user takes special measures to reduce electromagnetic
emissions to prevent interference to the reception of radio and television
broadcasts.
In Canada
CAN ICES-3(A) / NMB-3(A).
In the US and places where the FCC regulations are applicable
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential
area is likely to case harmful interference in which case the user will be required to
correct the interference at his own expense.
ENGLISH
INSTRUCTIONS TO USERS: Some cables have to be used with the core set.
Use the accessory cable or a designated type cable for the connection. For cables
that have a core only at one end, connect the core to the projector.
CAUTION: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
As with any bright source, do not
stare into the direct beam, RG2
IEC 62471-5:2015.
3
Regulatory notices (continued)
Disposal of Old Equipment and Batteries Only for European
Union and countries with recycling systems
The above mark is in compliance with the Waste Electrical and Electronic
Equipment Directive 2012/19/EU (WEEE). The mark indicates the
requirement NOT to dispose the equipment including any spent or
discarded batteries as unsorted municipal waste, but use the return and
collection systems available. If the batteries or accumulators included
with this equipment display the chemical symbol Hg, Cd, or Pb, then it
means that the battery has a heavy metal content of more than 0.0005%
Mercury, or more than 0.002% Cadmium or more than 0.004% Lead.
Note for the battery symbol (bottom symbol): This symbol
might be used in combination with a chemical symbol. In this case it
complies with the requirement set by the Directive for the chemical
involved.
Contents of package
Your projector should come with the items
shown below. Check that all the items are
included. Require of your dealer immediately
if any items are missing.
(1) Remote control with two AA batteries
(2) Power cord
(3) Computer cable
(4) User’s manual *
This is the basic manual on the product. Visit our
website to get the detailed manuals and the latest
information on the product. (1)
(5) Security label
(6) Lens cover
(7) Adapter cover
(8) HDMI cable holder (x2)
(9) Cable tie (x2)
(10) Cable tie (x1)
(1)
(2)
(3)
(4)
(5)
MYBUTTON
INPUT
AUTO
ASPECT
PbyP
FOCUS
ZOOM
MAGNIFY
ON
OFF
PAGE
UP
GEOMETRY PICTURE MUTE
NETWORK
INTERACTIVE
DOWN
ESC MENU
ENTER
OSD MSG
FREEZE
VOLUME
BLANK
(6)
(7)
RESET
( MC-EW5001/
MC-EX5001)
( MC-EU5001/
MC-EU4501)
(8)
(9)
(10)
WARNING ►Keep small parts away from children and pets. Take care
not to put in the mouth. If swallowed, consult a physician immediately for
emergency treatment.
NOTE • Keep the original packing materials for future reshipment. Be sure
to use the original packing materials when moving the projector. Use special
caution for the lens.
• The projector may make a rattling sound when tilted, moved or shaken, since
a flap to control the air flow inside of the projector has moved. Be aware that
this is not a failure or malfunction.
4
Preparing for the remote control
Please insert the batteries into the remote control before using it. If the remote
control starts to malfunction, try to replace the batteries. If you will not use the
remote control for long period, remove the batteries from the remote control and
store them in a safe place.
Remove the battery cover.
1.
Align and insert the two AA batteries (Use
2.
the appropriate AA carbon-zinc or alkaline
batteries (non-rechargeable) in accordance
with laws and regulations.) according to their
plus and minus terminals as indicated in the
remote control.
Put the battery cover back to the former state.
3.
WARNING ►Always handle the batteries with care and use them only as
directed. Improper use may result in battery explosion, cracking or leakage,
which could result in fire, injury and/or pollution of the surrounding environment.
• When replacing the batteries, replace both of the batteries with new batteries
of the same type. Do not use a new battery with a used battery.
• Be sure to use only the batteries specified. Do not use batteries of different
types at the same time. Do not mix a new battery with used one.
•
Make sure the plus and minus terminals are correctly aligned when loading a battery.
• Keep a battery away from children and pets.
• Do not recharge, short circuit, solder or disassemble a battery.
•
Do not place a battery in a fire or water. Keep batteries in a dark, cool and dry place.
•
If you observe battery leakage, wipe out the leakage and then replace a battery.
If the leakage adheres to your body or clothes, rinse well with water immediately.
•
Obey the local laws on disposing the battery.
ENGLISH
5
Arrangement
Refer to tables T-1 to T-3 and figures F-1 and F-2 at the end of this manual to
determine the screen size and projection distance. The values shown in the
table are calculated for a full size screen.
a Screen size (diagonal)
b Projection distance (±10%, from the projector's end)
c1
, c2 Screen height (±10%)
• If the projector is used at an altitude of about 1600 m (5250 feet) or higher, set ALTITUDE
of the SERVICE item in the OPTION menu to HIGH. Otherwise, set it to NORMAL.
If the projector is used with a wrong setting, it may cause damage to the projector itself or
the parts inside.
WARNING ►Install the projector where you can access the power outlet
easily.
►Install the projector in a stable horizontal position.
• Do not use any mounting accessories except the accessories specified by the
manufacturer. Read and keep the manuals of the accessories used.
For special installation such as ceiling mounting, be sure to consult your dealer
•
beforehand. Specific mounting accessories and services may be required.
• Do not put the projector on its side, front or rear position. If the projector falls
or is knocked over, it could cause injury and/or damage to the projector.
• Do not attach nor place anything on the projector unless otherwise specified
in the manual.
►Do not install the projector near thermally conductive or flammable things.
►Do not place the projector where any oils, such as cooking or machine oil, are
used.
►Do not place the projector in a place where it may get wet.
CAUTION ►Place the projector in a cool place with sufficient ventilation.
• Keep a space of 30 cm or more between a side of the projector and other
objects such as walls.
• Do not stop up, block nor cover the projector’s vent holes.
• Do not place the projector at places that are exposed to magnetic fields, doing
so can cause the cooling fans inside the projector to malfunction.
►Avoid placing the projector in smoky, humid or dusty place.
• Do not place the projector near humidifiers.
(continued on next page)
6
Loading...