1
Contents
Important Safety Instructions .........................................................................................................................2
Safety ..................................................................................................................................................................................... 2
Identifying the Parts ...........................................................................................................................................3
Main Unit: ........................................................................................................................................................................... 3
Remote Control ................................................................................................................................................................. 3
Connections ..........................................................................................................................................................4
Connect to External Audio Device.............................................................................................................................. 4
Connect Power .................................................................................................................................................................. 4
Install remote control batteries ......................................................................................................................4
Prepare the Remote Control ......................................................................................................................................... 4
Replace the Remote Control Battery ......................................................................................................................... 4
Precautions Concerning Batteries .............................................................................................................................. 4
Basic Operations ..................................................................................................................................................5
Power .................................................................................................................................................................................... 5
Adjust Volume Level ........................................................................................................................................................ 5
Mute Sound ........................................................................................................................................................................ 5
Play ...........................................................................................................................................................................5
Play iPod/iPhone/iPad ..................................................................................................................................................... 5
Play With Bluetooth Device ........................................................................................................................................... 5
Play With an External audio Device ............................................................................................................................ 6
Troubleshooting ..................................................................................................................................................6
Specications ........................................................................................................................................................7
Standard Accessories .........................................................................................................................................7
2
Important Safety Instructions
WARNING
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COV ER (OR BACK) . NO USER -S ERV IC EA BL E PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous volta ge” withi n the produc t ’s
enclosure that may be of sucient magnitude
to co n s t itut e a ris k of el ect r i c sho c k to
persons.
The exclamation point within an equilateral
triangle is in t e n d e d to aler t t h e user to
the pres ence of important operati ng and
maintenance (servicing) instructions in the
literature accompanying the appliance.
Safety
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings. Install
in accordance with the manufacturer’s
instructions.
8 Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including ampliers) that produce
heat.
9 Do not override the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades - one wider than the
other. A grounding plug has two blades and
a third grounding prong. The wide blade or
the third prong is provided for your safety. If
the provided plug does not t into your outlet,
consult electrician for replacement of the
obsolete outlet.
10 Protect the power cord from being walked
on or pinched particularly at plugs,
convenience receptacles, and the point
where it exit from the apparatus.
11 Only use attachment/accessories specied
by the manufacturer.
12 Use only with a cart, stand, tripod, bracket or
table specied by the manufacturer, or sold
with the apparatus. When a cart is used, use
caution when moving the cart/ apparatus
combination to avoid injury from tip-over.
13 Unplug this apparatus during lightning storms
or when unused for long periods of time.
14 Refer all servicing to qualied service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as power supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the
apparatus, the apparatus has been exposed
to rain or moisture, does not operate normally,
or has been dropped.
15 Do not expose this equipment to dripping or
splashing and ensure that no objects lled
with liquids, such as vases, are placed on the
equipment.
16 This is CLASS II apparatus with double
insulation, and no protective earth provided.
17 Warning: to reduce the risk of electric shock,
do not expose this apparatus near moisture.
18 Warning: the battery (battery or batteries or
battery pack) shall not be exposed to exceessive
heat such as sunshine, re or the lick.
19 The mains plug is used as the disconnect
device, the disconnect device shall remain
readily operable.
3
Main Unit:
AUX
AUX
AUX
AC ~
1
Press this button to turn on or switch to the Eco
Power standby mode.
2 DOCK
- Select Dock function.
- In DOCK mode, start or pause playback.
3 BLUETOOTH
- Select Bluetooth function.
- In Bluetooth mode, start or pause playback
(press the button once).
- In Bluetooth mode, pair the Bluetooth enabled device (press and hold the button).
4 AUX
Select AUX IN function.
5 MUTE
Mute or resume sound of unit.
6 VOL+/VOL -
Increase or decrease the volume level.
7 AUX socket
Connect to an external audio device.
8 AC~
Connect to power cord.
Identifying the Parts
Remote Control
1
Turn on this product or switch to Eco Power
standby mode.
2
Select a function.
3 VOL+/VOL-
Increase or decrease volume level.
4
H
,
G
Skip to previous track/next track
.
5
BF
Start or pause playback.
6 MENU
Switch between the folder list and the le list
for iPod/iPhone.
7 MUTE
Mute or resume sound.
8 ENTER
Conrm selections.
9 PAIRING
Enable Bluetooth Pairing mode.
10 ,
Navigate through iPod/iPhone/iPad menu.
4
Connections
Connect to External Audio Device
You can also listen to an external audio device
through this unit.
Using AUX socket
Connect audio cable to:
- The AUX socket on this unit.
- The audio output socket on external audio
device (e.g. TV, iPhone......) .
Note:
Press AUX button on main unit or FUNCTION on
remote control to select AUX function for your
connection.
Connect Power
Caution:
- Risk of product damage! Ensure that the power
supply voltage corresponds to the voltage
printed on the back or the underside of the
unit.
- Before connecting the power cord, ensure
you have completed all other connections.
AUX
AC ~
Connect the power adaptor to the AC socket on
the unit and a wall outlet.
Install remote control batteries
Prepare the Remote Control
The provided Remote Control allows the unit to
be operated from a distance.
Even if the Remote Control is operated within
the eective range (6m), remote control
operation may be impossible if there are any
obstacles between the unit and the remote
control.
If the Remote Control is operated near other
products which generate infrared rays, or if
other remote control devices using infrared
rays are used near the unit, it may operate
incorrectly. Conversely, the other products
may operate incorrectly.
For First-time use
Th e uni t ha s a pr e -i n st al le d
lithium CR2025 battery. Remove
the protective tab to activate the
remote control battery.
Replace the Remote Control Battery
(A) : Press down the ip on the left.
(B) : Pull out the battery tray and remove the old
battery.
(C) : Place a new CR2025 battery into the battery
tray with correct polarity (+/-) as indicated.
(D) : Insert the tray back into the slot.
Precautions Concerning Batteries
When the Remote Control is not to be used
for a long time (more than a month), remove
the battery from the Remote Control to
prevent it from leaking.
If the batteries leak, wipe away the leakage
inside the battery compartment and replace
the batteries with new ones.
Do not use any batteries other than those
specied.
Do not heat or disassemble batteries. Never
throw them in re or water.
Do not carry or store batteries with other
metallic objects. Doing so could cause batteries
to short circuit, leak or explode.
Never recharge a battery unless it is conrmed
to be a rechargeable type.
5
3 Start to play the connected iPod/iPhone/iPad.
- To pause/resume play, press the
BF
button
on remote control or DOCK button on front
panel of unit.
- To skip to a track, press the
H/G
buttons.
- To navigate through the menu: press
M button, then press ,
to select and
press
BF
to conrm.
Note:
When you use , to navigate through the menu,
the interval between each operation should be
within some seconds, or it will return to normal
function.
Charge the iPod/iPhone/iPad
The docked iPod/iPhone/iPad begins to charge
while the unit is connected to AC power.
Play with Bluetooth Device
You can listen to music from a Bluetooth-enable
device via this player.
Pair the Bluetooth-enabled devices
The rst time you connect your Bluetooth device
to this player, you need to pair your device to this
player.
Note:
- The operational range between this player
and a Bluetooth device is approximately
8 meters.
- Before you connect a Bluetooth device to
this unit, familiarize yourself with the
Bluetooth capabilities of the device.
- Compatibility with all Bluetooth devices is
not guaranteed.
- Any obstacle between this unit and a
Bluetooth device can reduce the
operational range.
- Keep this player away from any other
electronic device that may cause
interference.
1 Turn on the Bluetooth function on your device.
2 Switch player's source to Bluetooth.
Basic Operations
Power
You can use all the functions on main unit or
remote control after connecting to power supply
(called Standby Mode).
Turning the System On
Press the button to turn the system on from
standby mode.
Note:
The set will switch to last selected source.
Turning the System O
Press button on main unit or on remote control
to turn the system o and go to Eco mode.
Note:
Be sure to unplug the power cord from the outlet
when the system is not in use for an extended
period of time.
Adjust Volume Level
During play, press the +/- buttons to increase/
decrease the volume level.
Mute Sound
Dur ing play, press the MUTE button to m ute
or restore sound. Press this button again or -/+
buttons to cancel the eect.
Play
Play iPod/iPhone/iPad
You can enjoy aud i o from iPod/iPhone / i Pad
through this unit.
This unit support the following iPod/iPhone/iPad
models:
iPod nano 7, iPod touch 5, iPhone 5, iPad mini,
iPad 4
1 Press the DOCK button on the front of unit or
FUNCTION button on remote control to select
iPod/iPhone/iPad source.
2 Place an iPod/iPhone/iPad to the dock.
6
3 Press and hold
BF
/ Pair button on remote
control or BLUETOOTH button on front panel
of unit for seconds to activate Bluetooth
pairing mode, the LED indicator lights up
every two seconds.
4 Search for Bluetooth device with your device.
5 Select “MXSP-BT3100” in the pairing list.
6 Enter default password "0000" if necessary,
if the pairing succeeds, the LED indicator
lights o every two seconds.
7 To disconnect connection, turn o the
Bluetooth function on your device or switch
the player to other source.
Tip
- If there's a connection exist, press and hold
BF
/ Pair button on remote control or
BLUETOOTH button on front panel of unit
for seconds will re-activate the pairing mode,
the connection will be interrupted.
- If there's no other Bluetooth device pair with
this player in two minutes, the player will
recovery previous connection.
- The player will also be disconnected when
your device is moved beyond the operational
range.
- If you want to reconnect your device to this
player, place it within the operational range.
- If the device is moved beyond the operational
range, when it is brought back, please check if
the device is still connected with the player.
- If they are connected, the LED indicator lights
o every two seconds.
- If the connection is lost, the LED indicator
is always on, follow the instruction above to
pair your device to the player again.
Listen to music from Bluetooth device
If the connected Bluetooth device supports
Advanced Audio Distribution Prole (A2DP),
you can listen to the music stored on the
device through the player.
If the device also supports Audio Video
Remote Control Prole (AVRCP) prole, you
can use the player's remote control to play
music stored on the device.
1. Pair your device with the player.
2. Start play music via your device (if it
support A2DP)
3. Use supplied remote control to control
play(if it support AVRCP)
- To pause/resume play, press the
BF
/ Pair
button on remote control or BLUETOOTH
button on front panel of unit.
- To skip to a track, press the
H/G
buttons.
Play with an External Audio Device
There is one AUX socket at the rear of unit.
Analogue audio sound signals from other sources
can be connected to the unit through these
socket.
1 In the ON mode, press AUX button on main
unit or FUNCTION on remote control to select
AUX IN function.
2 Press the +/- buttons to adjuct the volume to
your desired level.
3 In AUX IN mode, operate your audio device
directly for playback features.
Troubleshooting
To keep the warranty valid, never try to repair the
system yourself. If you encounter problems when
using this unit, check the following points before
requesting service.
No power
- Ensure that the AC cord of the apparatus is
connected properly.
- Ensure that there is power at the AC outlet.
- Press standby button to turn the unit on.
Remote control does not work
- Before you press any function button, rst
select the correct source.
- Reduce the distance between the remote
control and the unit.
- Insert the battery with its polarities (+/-) aligned
as indicated.
- Replace the battery.
- Aim the remote control directly at the ensor
on the front of the unit.
Using iPhone to play music
- While the iPhone is playing the music throught
the docking, there may be a chance that the
iPhone may not be under a good receiption
mode to get the incoming call signal.
No Response From the Unit
- Disconnect and reconnect the AC power plug,
then turn on the unit again.
7
Specications
General
Power Requirements ........AC 220-240V ~ 50/60Hz
Power Consumption .............................................. 15W
Output Power .....................................................25W x 2
Total Harmonic Distortion ................. 1%(1kHz, 1W)
Audio Input Sensitivity/Impedance...........................
.......................................................................500mV/47kΩ
Frequency Response ............................. 20Hz - 20kHz
Unit Dimensions (W x H x D) ........................................
......................................................... 480 x 169 x 107 mm
Speaker
Impedance .....................................................................8Ω
Rate Power ................................................................. 25W
Remote
Distance .........................................................................6m
Angle .............................................................................. 30
O
Standard Accessories
Remote Control ...........................................................x 1
Owner’s manual ...........................................................x 1
Design and specications are subject to
change without notice.
Loading...