Maxco Technology V2 1, V2 User Manual
WIRELESS CHARGING
WITH BLUETOOTH SPEAKER
Model:V2
Product user manual
1. Features 2. Spec of products
Item Spec Note
Model
Bluetooth version
Bluetooth protocol
Frequency
Speaker input voltage
Battery capability
Speaker charging electric current
Charging time
Wireless charger
Wireless charger input electric
voltage
Wireless charger input electric
current
Music playing time
Power botton
Microphone
Line in
Speaker charging
usb input
LED Indicator light
speaker charging
led indicator light
Talking time
Bluetooth call distance when
indoor obstacles are blocked
Bluetooth play music distance
when indoor obstacles are blocked
Microphone
Speaker
Frequency Range
wireless charger
charging usb input
V2
V5.0
HFP A2DP HSP AVRCP
2.402GHz-2.480GHz
DC_5V
1200mAh / 3.7V
≤700mA
About 3h
10W
DC_5.0V DC_9.0V
≤2000mA
5-5.5h
5-5.5h
Positive ≥9M,
Backward ≥7M
Positive ≥10M,
Backward ≥8M
4015 @ 42+/-3 dB
Φ42mm 4Ω
20 - 20, 000 Hz
Test conditions: use
iPhone, the volume is
70% of the maximum
volume to play
3. Speaker Operation
S/N Function Speaker
1 Power on
2 Power on
Answer
3
the phone
Hang up
4
the phone
Refuse to
answer the
5
phone
Low -
6
power
reminder
Auto power oPower on
7
8 Charging
Charging
9
full
playing/
10
suspend
Power - on
automatic
11
reconnection
function
Power o
statement
Open
statement
On the
phone
In talking
On the
phone
Power on
statement
statement
Any
statement
Charging
statement
standby/
playing
music
Power o
statement
Operation Note
Press and hold 2
seconds until appear
blue light and with
“Power on” “Pairing”
beep.
Press and hold 3
seconds until appear
red light and with
‘power on ‘beep.
Paired red and blue lights
flash alternately
The blue lamp flashes
once in 5 seconds after
the match is successful
The red light goes on for
one second and then
goes o
ress power1 second
Press 1 second with
“Call Ended”beep.
Press and hold 2
seconds with“Call
Rejected”beep.
When the battery
voltage is as low as
3.3v, there is a " battery
_ low" voice prompt
The Bluetooth speaker
will automatically shut
Put Micro USB cable
into the micro USB
input
Battery charging full
Press 1 second power
button
Within the scope of acceptance, power
on with“power on” Pairing”
“Bluetooth_connected”beep, The
Bluetooth speaker will be connected
back to the connected phone.
Red light keep on
Red light keep on
Red light o
Bluetooth speaker in
normal using
12 Siri
13 Line in
14 EQ change
Voice
15
prompt
on/o
4.
Wireless charger operation
Mobile
1
phone
charging
In
connection
Any Power
o
statement
Music
playing
Bluetooth
in
connection
Wireless
charger
base
Press power button
and hold 1.5 seconds
After inserting a 3.5
mm stereo audio line,
you can play
connected external
line in songs
Pressing the " Power"
key three times in a
row will switch the
Bluetooth audio EQ
mode, with a total of 6
EQ modes ( default,
ROCK, POP, Classic,
R & B, Country ), and
the audio mode of the
Bluetooth speaker is
the default.
Double - click the "
Power" key once, the
Bluetooth speaker
voice prompt will
enter the Mute state,
and double-click the "
Power" key once
again to cancel the
Mute state of voice
prompt.
The mobile phone is
placed in the wireless
charging area of the
charging seat to
realize charging
Mobile phone with Siri
After inserting the 3.5 mm
audio cable, the speaker
disconnects the Bluetooth
connection, and after
pulling out the LINE IN
cable, the speaker
automatically reconnects
and continues to play
mobile music
Mobile phone support
wireless charger
5. Package contents
1∗user manual
1∗micro USB cable
1∗audio cable
FCC Statement:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
(1) Reorient or relocate the receiving antenna.
(2) Increase the separation between the equipment and receiver.
(3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
(4) Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your
authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
RF Exposure Information
Bluetooth Speaker
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
Wireless Charging
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During
the operation of device a distance of 15 cm surrounding the device and 20 cm above the top surface of the
device must be respected.
This device complies with Part 18 of the FCC Rules. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
(1)Increase the separation between the equipment and any other radio device.
(2)Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
DECLARATION OF CONFORMITY
Hereby declares that the equipment type Shenzhen Maxco Technology Co.,Ltd
V2 The is in compliance with Directive 2014/53/EU
Manufacturer:Dongguan King Yuk Supply Chain Company Limited
Address: Floor 4th, Ao Bei Road No.9, Yantian Village, Fenggang Town, Dongguan,
Guangdong, China
Importer:xxx
Importer's Address:xxx
Loading...