Maxa Technologies Ltd MT150, MT200 User Manual

1

D

OCUMENT NO: DSXXXX

AU

TORISATION NO: XXXX

PAGE

1

OF

6

Maxa Technologies Ltd

Test Procedure

MAXATEC

MT150/MT200

Creating an Ethernet Port

Configuring Ethernet Board

This document is the Maxatec™ procedure to creating the Ethernet port for use with the
MT150/200 printer. Please read through these instructions from start to finish following the
instructions given to fully setup the Ethernet port.

2

D

OCUMENT NO: DSXXXX

AU

TORISATION NO: XXXX

PAGE

2

OF

6

Setup Procedure

Introduction:

This document has been created to help you create and setup Ethernet communications
to the Maxatec MT-150/MT-200 printers. Please follow the instructions below to complete
the setup process.

Please note that although this document contains screen images from a Windows XP
system, the same procedure applies to Windows 2000/Vista/Win7.

Adding the printer:

Install the driver:

Driver and utilities can be found on our FTP site:

ftp://ftp.maxatec-europe.com/Public/Maxatec/Printers/

Download printer driver Thermal Printer 3.x.x.
Install Printer Driver

Select TCP/IP from Printer Port drop down list and type in printer IP address