MAX-Ability Pressalit Okapi User Guide User Guide

Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Page 9
Page 10
Cleaning
The product is to be cleaned with hot water or a mild soapy cleaning agent. A list of suitable cleaning agents tested by Pressalit can be found on pressalit.com.
!
CAUTION
Always read the material safety data sheet (MSDS) and supplied instructions of the cleaning, disinfecting or de-scaling agent and comply with instructions for safe use, dilution, rinsing, drying, handling and storage of the agent.
IMPORTANT
• Do not use an autoclave or other type of steam cleaner.
• Avoid aggressive cleaning agents containing acids.
• Never spray the product directly with a high pressure cleaner.
• Avoid use of abrasive, corrosive or chlorine-based cleaning or disinfecting products.
10
Page 11
Page 12
Page 13
Article number
② ③ ④
⑥ ⑦ ⑧ ⑨
Serial number
Production date
Consult manual for use
Do not dispose as unsorted municipal waste. The product should be collected separately and returned to the designated recycling service.
Product weight
Maximum power consumption
Electric current
Name and address of manufacturer
These products are CE-marked in accordance with relevant requirements in:
• Council Directive 2006/42/EC (of 17 May 2006) on machinery.
• Council Directive 2011/65/EC (of 8 June 2011) on RoHS.
EAN 13 barcode
Consult the manual for important cautionary information such as warnings and precautions.
This product does not contain any of the hazardous substances mentioned in the Council Directive 2011/65/EC on RoHS.
⑭ ⑮ ⑯ ⑰ ⑱
Duty cycle
Maximum user weight
Mains voltage
Frequency
Standard, which product is manufactured in accordance with (if any).
These products are UKCA-marked in accordance with relevant requirements in:
• Supply of Machinery (Safety) Regulations 2008.
• The restriction of the use of certain hazardous substances in electrical and electronic equipment regulations 2012.
A declaration of conformity can be found at pressalit.com.
13
Page 14
Trouble-shooting
Symptom Cause Action
The product will not work, even though the wired remote control is used correctly.
Fault in power supply. Check that all wires and
plugs are intact and correctly connected. Contact Pressalit A/S or your local dealer.
The product runs up and down unevenly.
The baskets are unable to close/ open.
Contact Pressalit A/S or your dealer if the problem cannot be remedied. Do not attempt to repair the product yourself, as this will invalidate the warranty.
The sliding brackets are not properly lubricated.
The basket may have been twisted unintendedly.
Oil the sliding brackets as described under ”Maintenance”.
Try to straighten the basket.
14
Page 15
Storage and transportation
• The temperature for transportation and storage of the unit must be between 5 and 40° Celsius (41 and 104° F).
• The unit must always be transported in its original packaging.
• Avoid subjecting the packaging to shocks and impacts.
• Do not use the product if the packaging is broken or damaged.
Disposal and recycling
The unit contains reusable materials. There are no known hazards or risks associated with disposal of the product. All components can be discarded after having been cleaned and disinfected.
When disposing of the product, we recommend that it be disassembled and broken down into different waste groups for recycling or combustion.
The following table provides information on the recycling and handling of the product.
Recyclable
components
Steel Steel can be recycled by being melted down and included
as a secondary material in the production of new steel.
Plastics Use plastic sorting and recycling systems where they are
locally available, otherwise incinerating plastic has the added benefit of generating energy which can be used for, for example, combined heat and power production.
Electronics The electronic components should be collected
separately and returned to the designated recycling service.
Material
15
Loading...