Max SN883-90CH/34(CE), SN883-100CH/34(CE) Maintenance Manual

SN883-90CH/34(CE)
SN883-100CH/34(CE)

OPERATING and MAINTENANCE MANUAL

BETRIEBSANLEITUNG

MANUEL D’UTILISATION et D’ENTRETIEN

MANUALE DI FUNZIONAMENTO E MANUTENZIONE

MANUAL DE OPERACIONES Y MANTENIMIENTO

34 DEGREE CLIPPED HEAD
FRAMING STICK NAILER

34-GRAD BEFESTIGTER RAHMEN­STOCKHAUPTNAGLER

CLOUEUSE À MANCHE D’ENCADREMENT
DE TÊTE COUPÉE À 34 DEGRÉS

INCHIODATRICE A MANICA DI QUADRO
DI TESTA TAGLIATA A 34 GRADI

CLAVADORA DE BARRA DE MARCO
DE CABEZA CORTADA A 34 GRASDOS

BEFORE USING THIS TOOL, STUDY THIS MANUAL TO ENSURE SAFETY WARNING
AND INSTRUCTIONS.
KEEP THESE INSTRUCTIONS WITH THE TOOL FOR FUTURE REFERENCE.

LESEN SIE VOR INBETRIEBNAHME DES GERÄTES DIE GEBRAUCHS- UND SICHER­HEITSHINWEISE. BITTE BEWAHREN SIE DIE GEBRAUCHS- UND SICHERHEITSHIN­WEISE AUF, DAMIT SIE AUCH SPÄTER EINGESEHEN WERDEN KÖNNEN.

AVANT D’UTILISER CET OUTIL, LIRE CE MANUEL ET LES CONSIGNES DE SECURITE
AFIN DE GARANTIR UN FONCTIONNEMENT SUR.
CONSERVER CE MANUEL EN LIEU SUR AVEC L’OUTIL AFIN DE POUVOIR LE CON­SULTER ULTERIEUREMENT.

PRIMA DI USARE QUESTA MACCHINA, STUDIARE IL MANUALE PER PRENDERE ATTO
DEGLI AVVERTIMENTI E DELLE ISTRUZIONIPER LA SICUREZZA.
TENERE QUESTE ISTRUZIONI INSIEME ALLO STRUMENTO PER CONSULTAZIONI FU­TURE.

PARA EVITAR GRAVES DAÑOS PERSONALES O EN LA PROPIEDAD.
ANTES DE EMPLEAR LA HERRAMIENTA, LEER CON ATENCIÓN Y COMPRENDER LOS
SIGUIENTES INSTRUCCIONES DE SEGURIDAD.

WARNING

ACHTUNG

AVERTISSEMENT

ATTENZIONE

ATENCIÓN

2

INDEX INHALTSVERZEICHNIS INDEX INDICE ÍNDICE

ENGLISH Page 3 to 16
DEUTSCH Page 17 to 30
FRANÇAIS Page 31 to 44
ITALIANO Page 45 to 58
ESPAÑOL Page 59 to 72
PORTUGUÊS Consulte o CD-ROM ou o sítio web.
NEDERLANDS Raadpleeg de cd-rom of de website.
SVENSKA Se cd-skivan eller webbplatsen.
NORSK Referer til CD-ROMen eller til Web-sidene.
FINNISH Katso lisätietoja CD-ROM-levyltä tai verkkosivuilta.
DANSK Se cd-rom'en eller webstedet.
POLSKI

Więcej informacji na płycie CD-ROM lub stronie internetowej.
ΕΛΛΗΝΙΚΑ Ανατρέξτε στο CD-ROM ή στην τοποθεσία Web.
TÜRKÇE CD-ROM veya Web sitesine bakınız.
РУССКИЙ См. на компакт-диске или на веб-сайте.

www.max-ltd.co.jp/int/eu/

DEFINITIONS OF SIGNAL WORDS
WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or

serious injury.

CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or

moderate injury.

NOTE: Emphasizes essential information.

DEFINITIONEN DER HINWEISBEZEICHNUNGEN
ACHTUNG! Zeigt eine eventuell gefährliche Situation an, die den Tod oder schwere Verletzungen zur

Folge haben könnte, wenn sie nicht vermieden wird.

VORSICHT! Zeigt eine eventuell gefährliche Situation an, die leichte oder mittelschwere Verletzungen

zur Folge haben könnte, wenn sie nicht vermieden wird.

HINWEIS: Hebt wichtige Informationen hervor.

DÉFINITIONS DES DIFFERÉNTS DEGRÉS D’ AVERTISSEMENTS
AVERTISSEMENT Indique une situation éventuellement dangereuse qui, si elle n’est pas contournée, pour-

rait provoquer la mort ou des blessure sérieuses.

ATTENTION Indique une situation éventuellement dangereuse qui, si elle n’est pas contournée, pour-

rait provoquer des blessures légères à moyennement sérieuses.

REMARQUE Souligne des informations importantes.

DEFINIZIONE DELLE INDICAZIONI DI AVVERTIMENTO
ATTENZIONE: Indica l’eventualità che possa verificarsi una situazione pericolosa, la quale se non viene

evitata, può risultare letale o provocare gravi lesioni.

AVVERTENZA: Indica l’eventualità che possa verificarsi una situazione pericolosa, la quale se non viene

evitata, può provocare lesioni di lieve o media entità.

NOTA: Evidenzia informazioni importanti.

DEFINICIÓN DE LAS INDICACIONES DE ADVERTENCIA
!ATENCION! Indica una situación potencialmente peligrosa que podría causar la muerte o graves le-

siones si no se evita.

!PRECAUCIÓN! Indica una situación potencialmente peligrosa que podría causar lesiones menos graves

o leves si no se evita.

NOTA: Resalta informaciones importantes.

3

INDEX

1. SAFETY INSTRUCTIONS..................................................3

2. SPECIFICATIONS AND TECHNICAL DATA ....................7

3. AIR SUPPLY AND CONNECTIONS ..................................8

4. INSTRUCTIONS FOR OPERATION ................................10

5. MAINTENANCE................................................................15

6. STORAGE ........................................................................15

7. TROUBLE SHOOTING/REPAIRS....................................15

1. SAFETY INSTRUCTIONS

PRECAUTIONS ON USING THE TOOL

1. WEAR SAFETY GLASSES OR GOGGLES

Danger to the eyes always exists due to the
possibility of dust being blown up by the ex­hausted air or of a fastener flying up due to
the improper handling of the tool. For these
reasons, safety glasses or goggles shall al­ways be worn when operating the tool.
The employer and/or user must ensure that
proper eye protection is worn. Eye protection
equipment must conform to the require­ments of Council Directive 89/686/EEC of 21
DEC. 1989 (the American National Stand­ards Institute, ANSI Z87.1) and provide both
frontal and side protection.
The employer is responsible to enforce the
use of eye protection equipment by the tool
operator and all other personnel in the work
area.

ENGLISH

OPERATING and MAINTENANCE MANUAL

BEFORE USING THIS TOOL, STUDY THIS MANUAL TO ENSURE SAFETY WARNING AND IN­STRUCTIONS.
KEEP THESE INSTRUCTIONS WITH THE TOOL FOR FUTURE REFERENCE.

WARNING

TO AVOID SEVERE PERSONAL INJURY
OR PROPERTY DAMAGE

BEFORE USING THE TOOL, READ CARE­FULLY AND UNDERSTAND THE FOLLOW­ING "SAFETY INSTRUCTIONS". FAILURE
TO FOLLOW WARNINGS COULD RESULT
IN DEATH OR SERIOUS INJURY.

WARNING

4

NOTE: Non-side shielded spectacles and
face shields alone do not provide adequate
protection.

2. EAR PROTECTION MAY BE REQUIRED
IN SOME ENVIRONMENTS

As the working condition may include expo­sure to high noise levels which can lead to
hearing damage, the employer and user
should ensure that any necessary hearing
protection is provided and used by the oper­ator and others in the work area.

3. DO NOT USE ANY POWER SOURCE EX­CEPT AN AIR COMPRESSOR

The tool is designed to operate on com­pressed air. Do not operate the tool on any
other highpressure gas, combustible gases
(e.g., oxygen, acetylene, etc.) since there is
the danger of an explosion. For this reason,
absolutely do not use anything other than an
air compressor to operate the tool.

4. OPERATE WITHIN THE PROPER AIR
PRESSURE RANGE

The tool is designed to operate within an air
pressure range of 5 to 7 bar (70 to 100 p.s.i.).
The pressure should be adjusted to the type
of the work being fastened. The tool shall
never be operated when the operating pres­sure exceeds 8 bar (120 p.s.i.).
Never connect the tool to air pressure which
potentially exceeds 14 bar (200 p.s.i.) as the
tool can burst.

5. DO NOT OPERATE THE TOOL NEAR A
FLAMMABLE SUBSTANCE

Never operate the tool near a flammable
substance (e.g., thinner, gasoline, etc.). Vol­atile fumes from these substances could be
drawn into the compressor and compressed
together with the air and this could result in
an explosion.

6. NEVER USE THE TOOL IN AN EXPLO­SIVE ATMOSPHERE

Sparks from the tool may ignite atmospheric
gases, dust or other combustible materials.

7. DO NOT USE A WRONG FITTINGS

The connector on the tool must not hold
pressure when air supply is disconnected. If
a wrong fitting is used, the tool can remain
charged with air after disconnecting and thus
will be able to drive a fastener even after the
air line is disconnected, possibly causing in­jury.

8. DISCONNECT THE AIR SUPPLY AND
EMPTY THE MAGAZINE WHEN THE
TOOL IS NOT IN USE

Always disconnect the air supply from the
tool and empty the magazine when operation
has been completed or suspended, when un­attended, moving to a different work area, ad­justing, disassembling, or repairing the tool,
and when clearing a jammed fastener.

5

7

70

100

Thinner

Gasoline

5

9. INSPECT SCREW TIGHTNESS

Loose or improperly installed screws or bolts
cause accidents and tool damage when the
tool is put into operation. Inspect to confirm
that all screws and bolts are tight and prop­erly installed prior to operating the tool.

10. DO NOT TOUCH THE TRIGGER UNLESS
YOU INTEND TO DRIVE A FASTENER

Whenever the air supply is connected to the
tool, never touch the trigger unless you in­tend to drive a fastener into the work. It is
dangerous to walk around carrying the tool
with the trigger pulled, and this and similar
actions should be avoided.

11. NEVER POINT THE DISCHARGE OUTLET
TOWARD YOURSELF AND OTHER PER­SONNEL

If the discharge outlet is pointed toward peo­ple, serious accidents may be caused when
misfiring. Be sure the discharge outlet is not
pointed toward people when connecting and
disconnecting the hose, loading and unload­ing the fasteners or similar operations.

12. USE SPECIFIED FASTENERS
(SEE PAGE 7)

The use of fasteners other than specified
fasteners will cause the tool malfunction. Be
sure to use only specified fasteners when
operating the tool.

13. PLACE THE DISCHARGE OUTLET ON
THE WORK SURFACE PROPERLY

Failure to place the discharge outlet of the
nose in a proper manner can result in a fas­tener flying up and is extremely dangerous.

14. KEEP HANDS AND BODY AWAY FROM
THE DISCHARGE OUTLET

When loading and using the tool, never
place a hand or any part of body in fastener
discharge area of the tool. It is very danger­ous to hit the hands or body by mistake.

15. DO NOT DRIVE FASTENERS CLOSE TO
THE EDGE AND CORNER OF THE WORK
AND THIN MATERIAL

The workpiece is likely to split and the fas­tener could fly free and hit someone.