Max Magic Jelly DJ Ball Owner's Manual



SAFETY INSTRUCTIONS
Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take

all precautions to avoid fire and/or electrical shock. Repairs must only be carried out by a qualified technician
in order to avoid electrical shock. Keep the manual for future reference.

- Prior to using the unit, please ask advice from a
specialist. When the unit is switched on for the first
time, some smell may occur. This is normal and will
disappear after a while.

- The unit contains voltage carrying parts. Therefore do
NOT open the housing.

- Do not place metal objects or pour liquids into the
unit This may cause electrical shock and malfunction.

- Do not place the unit near heat sources such as
radiators, etc. Do not place the unit on a vibrating
surface. Do not cover the ventilation holes.

- The unit is not suitable for continuous use.

- Be careful with the mains lead and do not damage it.
A faulty or damaged mains lead can cause electrical
shock and malfunction.

- When unplugging the unit from a mains outlet,
always pull the plug, never the lead.

- Do not plug or unplug the unit with wet hands.

- If the plug and/or the mains lead are damaged, they
need to be replaced by a qualified technician.

- If the unit is damaged to such an extent that internal
parts are visible, do NOT plug the unit into a mains
outlet and DO NOT switch the unit on. Contact your
dealer. Do NOT connect the unit to a rheostat or
dimmer.

- To avoid fire and shock hazard, do not expose the
unit to rain and moisture.

- All repairs should be carried out by a qualified
technician only.

- Connect the unit to an earthed mains outlet (220­240Vac/50Hz) protected by a 10-16A fuse.

- During a thunderstorm or if the unit will not be used
for a longer period of time, unplug it from the mains.
The rule is: Unplug it from the mains when not in use.

- If the unit has not been used for a longer period of
time, condensation may occur. Let the unit reach
room temperature before you switch it on. Never use
the unit in humid rooms or outdoors.

- During operation, the housing becomes very hot. Do
not touch it during operation and immediately after.

- To prevent accidents in companies, you must follow
the applicable guide lines and follow the instructions.

- Secure the unit with an extra safety chain if the unit is
ceiling mount. Use a truss system with clamps. Make
sure nobody stands in the mounting area. Mount the
effect at least 50cm away from inflammable material
and leave at least 1 meter space on every side to
ensure sufficient cooling.

- This unit contains high intensity LEDs. Do not look
into the LED light to prevent damage to your eyes.

- Do not repeatedly switch the fixture on and off. This
shortens the life time.

- Keep the unit out of the reach of children. Do not
leave the unit unattended.

- Do not use cleaning sprays to clean switches. The
residues of these sprays cause deposits of dust and
grease. In case of malfunction, always seek advice
from a specialist.

- Only operate the unit with clean hands.

- Do not force the controls.

- If the unit has fallen, always have it checked by a
qualified technician before you switch the unit on
again.

- Do not use chemicals to clean the unit. They damage
the varnish. Only clean the unit with a dry cloth.

- Keep away from electronic equipment that may
cause interference.

- Only use original spares for repairs, otherwise
serious damage and/or dangerous radiation may
occur.

- Switch the unit off prior to unplugging it from the
mains and/or other equipment. Unplug all leads and
cables prior to moving the unit.

- Make sure that the mains lead cannot be damaged
when people walk on it. Check the mains lead before
every use for damages and faults!

- The mains voltage is 220-240Vac/50Hz. Check if
power outlet match. If you travel, make sure that the
mains voltage of the country is suitable for this unit.

- Keep the original packing material so that you can
transport the unit in safe conditions

This mark attracts the attention of the user to high voltages that are present inside the housing and that are of

sufficient magnitude to cause a shock hazard.

This mark attracts the attention of the user to important instructions that are contained in the manual and that

he should read and adhere to.

DO NOT LOOK DIRECTLY INTO THE LENS. This can damage your eyes. Persons who are subject to

epileptic attacks should be aware of the effects that this light effect may have on them.
The unit has been certified CE. It is prohibited to make any changes to the unit. They would invalidate the CE

certificate and their guarantee!
NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between

5°C/41°F and 35°C/95°F

MAGIC JELLY DJ BALL 6x1W LED MP3 PLAYER

153.228



ENGLISH

This music-controlled multicolour LED Magic Jelly DJ Ball creates an amazing double lighteffect. Due to the LED
Technology, 6x 1W LED, 82 strong beams and a glowing transparent crystal globe, a col or changing ball is produced
while the globe turns along with the rest of the effect. Sound or auto controlable. Features an MP3 player and speaker
and comes with a strong plastic housing. This Effect is a great value for the money. Suitable for discos, bars, clubs
etc.

 Built-in MP3 player and speaker
 Strong rotating colorful beams
 Auto and Sound-active mode
 Long life LEDs and energy saving

DEUTSCH

Dieser musikgesteuerte mehrfarbige LED Magic Jelly DJ Ball erzeugt einen erstaunlichen Doppel Lichteffekt.
Aufgrund der LED-Technologie, 6x 1W LED, 82 starken Beams und einer glühenden transparenten Kristallkugel wird
einen Farbwechselnden Ball erzeugt, während der Globus zusammen leuchtet mit dem Rest des Effekts. Die
Stroboskop-Blitzfrequenz und Helligkeit sind einstellbar. Ausgestatt et mit einem MP3 Spieler und Lautsprecher und
kommt mit starkem Kunststoffgehäuse. Dieser Effekt ist ein großer Wert für das Geld. Geeignet für Discos, Bars,
Clubs, Kneipen usw.

 Eingebauter MP3 Spieler und Lautsprecher
 Starke rotierende farbige Strahlen
 Auto und Musikgesteuerter Modus
 Energiesparende LEDs mit langer Lebensdauer

NEDERLANDS
Deze muziekgestuurde meerkleurige LED Magic Jelly DJ Ball zorgt voor een verbluffend dubbel lichteffect. Als gevolg
van de LED-technologie, 6x 1W LED, 82 sterke beams en een lichtgevende bol van melkglas wordt een van kleur
veranderende bal geproduceerd, terwijl de bol meekleurt met de rest van het effect. Uitgevoerd met een MP3 speler
én luidspreker en wordt geleverd in een kunststof behuizing. Het effect is een grote waarde voor het geld. Perfect voor
gebruik in disco's, bars, clubs, cafés enz.

 Ingebouwde MP3 speler en luidspreker
 Krachtige roterende kleurrijke stralen
 Auto en muziekgestuurde mode
 Lange levensduur LEDs en energie besparend

ESPAGNOL

Efecto activado por la musica multicolor LED Magic Jelly DJ Ball que crea multitud de rayos de colores. Utilizando la
tecnologia LED, 6x 1W LED se crean 82 rayos con una lente de cambio de colores co n giro lento. Incorpora
reproductor MP3 y altavoz. El nivel de strobo y brillo son ajustables. Incorpora modos Auto y ritmo de la musica.
Precio razonable para un efecto increible. Ideal para fiestas , bares, disco, club, etc.

 Reproductor MP3 y altavoz incorporado
 Rayos rotativos de color
 Modo Auto y Ritmo de la musica
 Leds de larga duracion y bajo consumo

Technical specification
Operating System …………………..………….. Auto, Sound Active
No. of LEDs……………………………………… 6x1W LEDs
Pattern ……………………………………………

Magic Ball Lights

Dimension ……………………………………….

190mmø x 140mm

Power supply………………………..…………… 230Vac - 50Hz

Weight ………………………………………….... 1kg